Skip to main content
Elsevier

Books in Engineering and technology

The Engineering and Technology portfolio includes comprehensive overviews of all major research and practical developments in aerospace and automotive engineering, civil and environmental engineering, mechanical and industrial engineering, materials engineering, electrical engineering, communications engineering, and more. In-depth coverage, innovative state-of-the-art approaches, and real-world case studies provide valuable, actionable insights for researchers, applied engineers and students. The content in Elsevier's Engineering and Technology books program addresses core issues in industry and society, such as sustainability, the circular economy, AI, and automation.

  • Integrated Engineering/Construction Projects

    Proposal to Completion
    • 1st Edition
    • Edward Dansker
    • English
    Shows how to develop an integrated engineering/construc... project. Details the physical aspects of a complicated construction project and provides an overview of the organization required to produce such a project.

  • Sick Building Syndrome

    Sources, Health Effects, Mitigation
    • 1st Edition
    • M. C. Baechler
    • English
    This book summarizes information about indoor air quality and ventilation in both new and existing commercial buildings. The quality of indoor air is dependent on the complex interaction between sources of indoor pollutants, environmental factors within buildings such as temperature and humidity, the removal of air pollutants by air cleaning devices, and the removal and dilution of pollutants from inside air by ventilation. The book addresses specific pollutants in the second section.

  • Adhesives, Sealants and Coatings for the Electronics Industry

    • 1st Edition
    • Ernest W. Flick
    • English
    The second edition of this widely accepted industrial guide contains descriptions of more than 2,500 adhesives, sealants, and coatings, which are available to the electronics and related industries. The book, greatly expanded from the previous edition, is the result of information received from 80 manufacturers and distributors of these products. The data, including product specifications, represent selections from the manufacturers' descriptions made at no cost to, nor influence from, the makers or distributors of these materials. Only the most recent information has been included. It is believed that all of the products listed are currently available, which will be of interest to readers concerned with product discontinuances.

  • Lubricants and Special Fluids

    • 1st Edition
    • V. Stepina + 1 more
    • English
    The constitution, properties, production and applications of lubricants and related fluids of all states of aggregation are reviewed in this volume. Special attention is devoted to synthetic lubricants and to additives for lubricants. Standards of quality are listed, together with systems of classification and the most important specifications and methods of testing the properties of lubricants and their performance in service. Future trends in lubricants are also discussed. Non-conventional lubricants and additives are examined in detail. The relationship between constitution and properties of lubricants, e.g., the viscosity -temperature -pressure relationship, the behaviour in ageing, the biodegradability, synergisms and antagonisms in the blends of lubricants, of additives and lubricant-additive are analyzed. Guidelines for the selection of lubricants and fluids in the design, service and maintenance of machines and machine parts are also given. The work will be of interest to all those involved in the research and development of petrochemical and machinery industries, as well as lecturers and students specializing in this field.

  • Encyclopedia of Environmental Control Technology: Volume 5

    Waste Minimization and Recycling
    • 1st Edition
    • Paul Cheremisinoff
    • English
    As landfills are closed and new and stricter legislation enacted, the problems of waste and pollution grow ever larger. Re-engineering production lines to reduce the source of unusable by-products is one answer, and developing new technologies to make use of these materials another. Recycling provides an immediate solution, and it is one that is becoming more and more popular in a variety of industries ranging from styrene to steel to newsprint. Like the other titles in the "Encyclopedia of Environmental Control Technology" series, this volume draws on contributors from around the world who are engaged in finding ways to solve the problems of waste and devising new strategies for recycling.

  • Microwave Excited Plasmas

    • 1st Edition
    • Volume 4
    • M. Moisan + 1 more
    • English
    The contrasting examples of microwave plasmas given in this volume demonstrate their capability of not only covering the totality of expressed needs in that particular field, but in many others. For example the ions and reactive neutral species, indispensable for the synergetic effects in etching and deposition processes can be used in metallurgical treatment, and for materials processing in general. They also have the ability to dissociate molecules and excite atoms as required in analytical chemistry where the information on the constituent concentrations is obtained through optical spectroscopy or mass spectrometry. Finally, microwave plasmas can supply the photons for laser and lighting applications. It is noteworthy that microwave plasmas cover an impressive pressure range of eight orders of magnitude from 10-3 Pa (10-5 torr) to above atmospheric pressure. The versatility of microwave plasmas, their moderate cost, and their ease of implementation particularly appeal to the industrial entrepreneur. As well as providing a review of current developments, the work proposes a synthesis on microwave discharges, laying out the corresponding physical references without developing too much plasma theory. It will be of interest both to the user, who may not be overly concerned about plasma science, and to the plasma expert, who may wish to redirect his interest towards plasma applications, such as materials processing.

  • Mathematical Problems in Elasticity and Homogenization

    • 1st Edition
    • Volume 26
    • O.A. Oleinik + 2 more
    • English
    This monograph is based on research undertaken by the authors during the last ten years. The main part of the work deals with homogenization problems in elasticity as well as some mathematical problems related to composite and perforated elastic materials. This study of processes in strongly non-homogeneous media brings forth a large number of purely mathematical problems which are very important for applications. Although the methods suggested deal with stationary problems, some of them can be extended to non-stationary equations. With the exception of some well-known facts from functional analysis and the theory of partial differential equations, all results in this book are given detailed mathematical proof.It is expected that the results and methods presented in this book will promote further investigation of mathematical models for processes in composite and perforated media, heat-transfer, energy transfer by radiation, processes of diffusion and filtration in porous media, and that they will stimulate research in other problems of mathematical physics and the theory of partial differential equations.

  • Laser Welding

    A Practical Guide
    • 1st Edition
    • C T Dawes
    • English
    Enables the reader both to understand and to use, in a practical manner, laser welding. The author explains the principles of laser welding and provides examples of industrial applications, examines many aspects of laser welding and devotes a complete chapter to safety.

  • Digital Control of Electric Drives

    • 1st Edition
    • Volume 43
    • R. Koziol + 2 more
    • English
    The electromechanical systems employed in different branches of industry are utilized most often as drives of working machines which must be fed with electric energy in a continuous, periodic or even discrete way. Some of these machines operate at constant speed, others require wide and varying energy control. In many designs the synchronous cooperation of several electric drives is required in addition to the desired dynamic properties. For these reasons the control of the cooperation and dynamics of electromechanical systems requires the use of computers.This book adopts an unusual approach to the subject in that it treats the electric drive system on the one hand as an element of a control system and on the other as an element of a complex automatic system. These two trends in the development of the automatic control of electric drives have resulted in a volume that provides a thorough overview on the variety of different approaches to the design of control systems.

  • Data Fusion in Robotics & Machine Intelligence

    • 1st Edition
    • Bozzano G Luisa
    • English
    This book addresses the techniques for modeling and integration of data provided by different sensors within robotics and knowledge sources within machine intelligence. Leaders in robotics and machine intelligence capture state-of-the-art technology in data sensor fusion and give a unified vision of the future of the field, presented from both the theoretical and practical angles.

  • Micronic Integrated Sensors

    • 1st Edition
    • Volume 22
    • J.L. Robert
    • English
    Progress in material research, recent developments in growth techniques, as well as in processing technology and modelling, have had a great impact on sensors. The contributions in this volume will be of interest to all those who wish to keep abreast of recent developments in the interdisciplinary field of sensor research.

  • Handbook of Crack Opening Data

    A Compendium of Equations, Graphs, Computer Software and References for Opening Profiles of Cracks in Loaded Components and Structures
    • 1st Edition
    • T.G.F. Gray
    • English
    Written mainly for specialists in non-destructive examination and fracture mechanics, this book provides means to estimate the opening profiles of cracks in loaded structures. Equations, non-dimensional graph plots, computer software, background information and references are given which permit the calculation of the separation distances of crack faces as a function of crack size, applied loading etc. Sixteen different cases are covered by this Handbook.An Abington Publishing Special Report

  • Self-Shielded Arc Welding

    • 1st Edition
    • T Boniszewski
    • English
    A detailed original perspective from a leading expert on welding metallurgy of the self-shielded arc welding process and its applications. The author explains the basic process metallurgy of the process and its relationship with other arc welding processes. He promotes self-shielded arc welding (SSAW) as a distinct process in its own right, dispels some widely held misconceptions, and sets out to bring its existence and advantages to the attention of designers and fabricators.

  • Diesel Generator Handbook

    • 1st Edition
    • L. L. J. Mahon
    • English
    Diesel Generator Handbook meets the need for an authoritative reference work covering the range of mechanical and electrical topics embodied in the practical design and application of diesel generating plant. It will be particularly welcomed in many parts of the developing world where the diesel generator is basic to the electricity supply system. The discussion covers, in fifteen chapters, the prime mover, power ratings, synchronous generators, load assessment, control principles and systems, switchgear and controlgear, standby power, fuels and lubricating oilss, installation and commissioning, noise reduction, and plant operation and maintenance. The book thus caters for all who are concerned with the selection, specification, testing, commissioning, operation and maintenance of diesel-based generator systems: not only the practising plant or services engineers, but also non-specialist engineers and users. The young technician or trainee engineer who is embarking on a career in the supply industry will find this handbook an invaluable investment. L L J Mahon, FIEE, FBIM, after an engineering apprenticeship with BTH in Rugby, gained over 30 years' experience in the design, development, manufacture, installation and commissioning of both stationary and highly specialised mobile diesel generator plant for a range of applications.

  • Hydrostatic Lubrication

    • 1st Edition
    • R. Bassani + 1 more
    • English
    Hydrostatic lubrication is characterized by the complete separation of the conjugated surfaces of a kinematic pair, by means of a film of fluid, which is pressurized by an external piece of equipment. Its distinguishing features are lack of wear, low friction, high load capacity, a high degree of stiffness and the ability to damp vibrations.This book reviews the study of externally pressurized lubrication, both from the theoretical and the technical point of view, thereby serving the needs of both researchers as well as students and technical designers. In this connection, design suggestions for the most common types of hydrostatic bearings have been included, as well as a number of examples. A comprehensive bibliography is included with each chapter providing up to date references for more in depth coverage.

  • Advances in Heat Transfer

    Bioengineering Heat Transfer
    • 1st Edition
    • Volume 22
    • English
    This volume of Advances in Heat Transfer begins with an excellent overview of heat transfer in bioengineering. Subsequent chapters lead the reader through fundamental approaches for analyzing the response of living cells and tissues to temperature extremes, state-of-the-art mathematical models of bioheat transfer, an extensive review of mathematical models of bioheat transfer processes at high and low temperatures, and experimental tools for temperature measurement. This volume will effectively aid any researcher in the field by illuminating a greater understanding of fundamental issues relevant to heat transfer processes in biosystems.

  • Wear Particles: From the Cradle to the Grave

    • 1st Edition
    • D. Dowson + 4 more
    • English
    The Leeds-Lyon symposia have well established themselves in the tribological calendar. Industrial progress requires a better understanding of interfacial phenomena than now exists and it is exciting to see that the topics addressed in these proceedings volumes are at the forefront of progress in tribological research. These proceedings contain 61 papers written by authors from all over the world, covering the entire spectrum of wear particles. Of particular interest is the detailed consideration of a wide range of particle formations and detachments, as well as a close look at the physics and chemistry of the wear of mechanisms, together with other in-depth state-of-the-art analytical contributions.

  • Forrest Mims Engineer's Notebook

    • 1st Edition
    • Forrest Mims
    • English
    The book features: carefully hand-drawn circuit illustrations hundreds of fully tested circuits tutorial on electronics basics tips on part substitutions, design modifications, and circuit operation All covering the following areas:Review of the BasicsDigital Integrated CircuitsMOS/CMOS Integrated CircuitsTTL/LS Integrated CircuitsLinear Integrated CircuitsIndex of Integrated CircuitsIndex of Circuit Applications

  • Radar and Arpa Manual

    • 1st Edition
    • Alan G. Bole + 2 more
    • English
    Radar and ARPA Manual has been planned not only as a comprehensive practical reference for mariners on board ship and managers ashore, but also to provide all essential information for candidates following ENS, radar observer and professional certificate courses.Recent years have seen significant changes in the design of basic radar systems: ARPA features are now almost entirely integrated with the radar display. This new manual covers the complete radar/ARPA installation, bringing together a body of practical information on equipment and techniques which will both serve the observer using traditional systems and provide reliable guidance for the use of newer equipment.The recent changes in radar displays that are likely to be of greatest significance to the observer are the developments in signal processing and the advent of raster-scan displays; these receive exhaustive treatment. The effects of changes in shipboard operations, such as false echoes from containers, are also dealt with.Throughout the book the operational significance of the IMO Performance Standards is stressed, as is the role of radar and ARPA in navigation and collision avoidance.

  • Creep of Soils

    and Related Phenomena
    • 1st Edition
    • Volume 68
    • J. Feda
    • English
    In this volume, soil creep is analysed within the framework of other soil-rheological phenomena, such as stress relaxation and long-term resistance, to present an in-depth discussion of the effect of time on soil behaviour. As time is the only state parameter which cannot be entirely modelled in the laboratory, the presented extrapolation is based upon a combination of appropriate theoretical analysis, and the principles of the physical behaviour of soils affected by state parameters such as porosity, water content, stress, strain, time and temperature. Principal macro- and microrheological theories are analysed, and a comprehensive picture of the soil structure and of the effect of state parameters is presented, documented by the author's experiments and illustrated by many examples. The theory of hereditary creep was selected as the best theory serving the author's purpose to propose simple constitutive relations governing creep of soils. The proposed constitutive relations have been implemented into FEM programs and the effect of the time factor has been demonstrated by the solution of such boundary value problems as a dams and underground tunnels. This volume should be of interest to civil engineers, scientists, research and postgraduate students, and advanced undergraduates.

  • Handbook of Display Technology

    • 1st Edition
    • Joseph A. Castellano
    • English
    This book presents a comprehensive review of technical and commercial aspects of display technology. It provides design engineers with the information needed to select proper technology for new products. The book focuses on flat, thin displays such as light-emitting diodes, plasma display panels, and liquid crystal displays, but it also includes material on cathode ray tubes. Displays include a large number of products from televisions, auto dashboards, radios, and household appliances, to gasoline pumps, heart monitors, microwave ovens, and more.For more information on display technology, go to the experts: http://www.insightme...

  • Centrifugal Pumps

    Design and Application
    • 2nd Edition
    • Val S. Lobanoff + 1 more
    • English
    Centrifugal Pumps: Design and Application, Second Edition focuses on the design of chemical pumps, composite materials, manufacturing techniques employed in nonmetallic pump applications, mechanical seals, and hydraulic design. The publication first offers information on the elements of pump design, specific speed and modeling laws, and impeller design. Discussions focus on shape of head capacity curve, pump speed, viscosity, specific gravity, correction for impeller trim, model law, and design suggestions. The book then takes a look at general pump design, volute design, and design of multi-stage casing. The manuscript examines double-suction pumps and side-suction design, net positive suction head, and vertical pumps. Topics include configurations, design features, pump vibration, effect of viscosity, suction piping, high speed pumps, and side suction and suction nozzle layout. The publication also ponders on high speed pumps, double-case pumps, hydraulic power recovery turbines, and shaft design and axial thrust. The book is a valuable source of data for pump designers, students, and rotating equipment engineers.

  • Materials for Tribology

    • 1st Edition
    • William Glaeser
    • English
    This handbook provides an extensive reference source on the materials used in tribological applications. Materials used in tribological applications are, for the most part, common materials used for general engineering applications. Many conventional engineering materials have been adapted to tribological uses and examples of these are given throughout the text. Literature that so far has been scattered and difficult to retrieve is now presented for the first time in this comprehensive treatise. The author has used his expertise in selecting materials for a wide variety of friction and wear applications to develop this data base on materials for tribology. In addition information has been selected from the literature on the behaviour of these materials in bearings, seals, gears, brakes, clutches, wire rope, valves, cams and wear surfaces and is included in the descriptive text. The materials have been grouped in families, relating to their composition. A short table is provided at the beginning of each chapter, listing the ranges of selected properties for the materials under discussion. In addition there are short summaries of the tribological applications this class of materials is used for. On the first page of each chapter one can find a guide for the selection of materials. Sufficient references to the literature are given to enable the reader to follow up in more detail the various topics discussed.

  • Cognitive Ergonomics

    Contributions from Experimental Psychology
    • 1st Edition
    • G.C. van der Veer + 2 more
    • English
    This collection of papers illustrates how concepts, theories and techniques from experimental psychology can be applied in the domain of Human-Computer Interaction (HCI). An experimental psychological basis for cognitive ergonomics is presented, built on a foundation of theoretical and experimental research. In addition, various issues in cognitive ergonomics are closely examined, including performance in specific interactive tasks - such as computer programming and program debugging. Other subject areas covered include database interrogation, text editing and graphics design.

  • Computer Vision and Image Processing

    • 1st Edition
    • Linda Shapiro
    • English
    Computer Vision and Image Processing contains review papers from the Computer Vision, Graphics, and Image Processing volume covering a large variety of vision-related topics. Organized into five parts encompassing 26 chapters, the book covers topics on image-level operations and architectures; image representation and recognition; and three-dimensional imaging. The introductory part of this book is concerned with the end-to-end performance of image gathering and processing for high-resolution edge detection. It proposes methods using mathematical morphology to provide a complete edge detection process that may be used with any slope approximating operator. This part also discusses the automatic control of low-level robot vision, presents an image partitioning method suited for parallel implementation, and describes invariant architectures for low-level vision. The subsequent two sections present significant topics on image representation and recognition. Topics covered include the use of the primitives chain code; the geometric properties of the generalized cone; efficient rendering and structural-statistic... character recognition algorithms; multi-level thresholding for image segmentation; knowledge-based object recognition system; and shape decomposition method based on perceptual structure. The fourth part describes a rule-based expert system for recovering three-dimensional shape and orientation. A procedure of intensity-guided range sensing to gain insights on the concept of cooperative-and-iter... strategy is also presented in this part. The concluding part contains supplementary texts on texture segmentation using topographic labels and an improved algorithm for labeling connected components in a binary image. Additional algorithms for three-dimensional motion parameter determination and surface tracking in three-dimensional binary images are also provided.

  • Dynamic Modeling of Transport Process Systems

    • 1st Edition
    • C. A. Silebi + 1 more
    • English
    This book presents a methodology for the development and computer implementation of dynamic models for transport process systems. Rather than developing the general equations of transport phenomena, it develops the equations required specifically for each new example application. These equations are generally of two types: ordinary differential equations (ODEs) and partial differential equations (PDEs) for which time is an independent variable. The computer-based methodology presented is general purpose and can be applied to most applications requiring the numerical integration of initial-value ODEs/PDEs. A set of approximately two hundred applications of ODEs and PDEs developed by the authors are listed in Appendix 8.

  • Camera Technology

    The Dark Side of the Lens
    • 1st Edition
    • Norman Goldberg
    • English
    For anyone who has ever wondered how cameras work, this book is a pleasant way to learn. It is generously endowed with enough fundamentals to satisfy the technical specialist, without intimidating the casual but curious amateur photographer. The author has repaired, modified, and designed and analyzed cameras for the past forty five years. With this background, he goes beyond describing camera functions based on advertised data, instead the book explains how various cameras really work. The book peels off the cover panels and lets you look into the dark side of the lens. The dozen or so formulas use simple math and the drawings alone are worth the price of admission.

  • Manufacturing and Automation Systems: Techniques and Technologies, Part 5 of 5

    Advances in Theory and Applications
    • 1st Edition
    • Volume 45
    • English

  • Failure Analysis Case Studies II

    • 1st Edition
    • D.R.H. Jones
    • English
    The first book of Failure Analysis Case Studies selected from volumes 1, 2 and 3 of the journal Engineering Failure Analysis was published by Elsevier Science in September 1998. The book has proved to be a sought-after and widely used source of reference material to help people avoid or analyse engineering failures, design and manufacture for greater safety and economy, and assess operating, maintenance and fitness-for-purpose procedures. In the last three years, Engineering Failure Analysis has continued to build on its early success as an essential medium for the publication of failure analysis cases studies and papers on the structure, properties and behaviour of engineering materials as applied to real problems in structures, components and design.Failure Analysis Case Studies II comprises 40 case studies describing the analysis of real engineering failures which have been selected from volumes 4, 5 and 6 of Engineering Failure Analysis. The case studies have been arranged in sections according to the specific type of failure mechanism involved. The failure mechanisms covered are overload, creep, brittle fracture, fatigue, environmental attack, environmentally assisted cracking and bearing failures. The book constitutes a reference set of real failure investigations which should be useful to professionals and students in most branches of engineering.

  • Advances in Applied Mechanics

    • 1st Edition
    • Volume 29
    • English

  • System Modelling and Control

    • 3rd Edition
    • J. Schwarzenbach + 1 more
    • English
    Providing a sound introduction to control engineering, this book features clear explanations and illustrations of the dynamic behaviour of systems and the main methods of analysis.This edition has been expanded to reflect advances in computer technology and includes many practical examples.

  • Advances in Applied Mechanics

    • 1st Edition
    • Volume 28
    • English

  • Stability of Large Structures

    • 1st Edition
    • K. A. Zalka + 1 more
    • English

  • Shallow Crack Fracture Mechanics Toughness Tests and Applications

    First International Conference
    • 1st Edition
    • Gyoujin Cho
    • English
    Within the last decade there has been an increasing awareness that use of standards deeply notched fracture mechanics test specimens can result in substantial over-or-under-assess... of the real fracture toughness associated with shallow surface cracks.

  • Materials Selection in Mechanical Design

    • 1st Edition
    • Michael F. Ashby
    • English
    New materials enable advances in engineering design. This book describes a procedure for material selection in mechanical design, allowing the most suitable materials for a given application to be identified from the full range of materials and section shapes available. A novel approach is adopted not found elsewhere. Materials are introduced through their properties; materials selection charts (a new development) capture the important features of all materials, allowing rapid retrieval of information and application of selection techniques. Merit indices, combinedwith charts, allow optimisation of the materials selection process. Sources of material property data are reviewed and approaches to their use are given. Material processing and its influence on the design are discussed. The book closes with chapters on aesthetics and industrial design. Case studies are developed as a method of illustrating the procedure and as a way of developing the ideas further.

  • The Art of Programming Embedded Systems

    • 1st Edition
    • Jack Ganssle
    • English
    Embedded systems are products such as microwave ovens, cars, and toys that rely on an internal microprocessor. This book is oriented toward the design engineer or programmer who writes the computer code for such a system. There are a number of problems specific to the embedded systems designer, and this book addresses them and offers practical solutions.

  • Intelligent Tuning and Adaptive Control

    Selected Papers from the IFAC Symposium, Singapore, 15-17 January 1991
    • 1st Edition
    • Volume 7
    • R. Devanathan
    • English
    This volume contains 67 papers reporting on the state-of-the-art research in the fields of adaptive control and intelligent tuning. Papers include applications in robotics, the processing industries and machine control.

  • Basics of Interferometry

    • 1st Edition
    • P. Hariharan
    • English
    This book is for those who have some knowledge of optics, but little or no previous experience in interferometry. Accordingly, the carefully designed presentation helps readers easily find and assimilate the interferometric techniques they need for precision measurements. Mathematics is held to a minimum, and the topics covered are also summarized in capsule overviews at the beginning and end of each chapter. Each chapter also contains a set of worked problems that give a feel for numbers.The first five chapters present a clear tutorial review of fundamentals. Chapters six and seven discuss the types of lasers and photodetectors used in interferometry. The next eight chapters describe key applications of interferometry: measurements of length, optical testing, studies of refractive index fields, interference microscopy, holographic and speckle interferometry, interferometric sensors, interference spectroscopy, and Fourier-transform spectroscopy. The final chapter offers suggestions on choosing and setting up an interferometer.

  • A Practical Guide to TIG (GTA) Welding

    • 1st Edition
    • P W Muncaster
    • English
    Comprehensive advice on applications, techniques and the best available equipment is given in clear, straightforward language.

  • Total Quality Management for Engineers

    • 1st Edition
    • M Zairi
    • English
    Written for practitioners and students with an engineering background, this book bridges the gap between their understanding of the techniques of quality control and the wider definition of TQM which is now accepted as a key part of business philosophy. Analyzes the relevance of total quality management (TQM) to changes in the engineering profession in the light of its increased involvement in company practices. It presents a broad picture of TQM and its main aspects and explains why it is considered as the major thrust for future competitiveness.

  • Creative Techniques in Product and Engineering Design

    A Practical Workbook
    • 1st Edition
    • D J Walker + 2 more
    • English
    The proceedings of a seminar held at TWI in September, 1995, focusing on crack arrest philosophy which aknowledges that a brittle crack is arrested when it emerges from the critical region. Papers from prestigious researchers presented a critique and assessment of the theory and its application under: Introduction to crack arrest concepts; Recent trends in crack arrest research; Application of crack arrest concepts. Intended for those who have to apply or teach design skills in a technical or engineering context, this resource book defines and explains eight creative thinking techniques and shows how to use and adapt these to solve design problems. Case studies are drawn from a wide range of applications.

  • Forensic Engineering

    Environmental Case Histories for Civil Engineers and Geologists
    • 1st Edition
    • James E. Slosson + 1 more
    • English
    This book explores these and many other related subjects. This book will be of great value to expert witnesses in liability suits resulting from flood, erosion, landslide, mudslide, or other types of natural hazard-related damage. It clearly explains the needs of an expert, the relationship of the expert to the client and the attorney, the challenges to face, and the proper orientation as an expert. Through a variety of case studies, the book illustrates investigative techniques, case and data presentation to prove "reasonableness" or "unreasonableness" of conduct and "causation."

  • Diesel Engines

    • 3rd Edition
    • A J WHARTON
    • English
    This book covers diesel engine theory, technology, operation and maintenance for candidates for the Department of Transport's Certificates of Competency in Marine Engineering, Class One and Class Two. The book has been updated throughout to include new engine types and operating systems that are currently in active development or recently introduced.

  • Mathematical and Control Applications in Agriculture and Horticulture

    • 1st Edition
    • Volume 1
    • W. Day + 1 more
    • English
    This title provides a general overview of recent developments and research into types of systems and their uses in the agricultural and horticultural industry. 64 papers are included, containing both theoretical models and applied examples for greenhouse systems, harvesting technology and plant factory systems.

  • Computer Simulation

    A Practical Perspective
    • 1st Edition
    • Roger W. McHaney
    • English
    This is a practical perspective on simulation aimed at working scientists and engineers. Amply illustrated, the book provides many examples with computer coding. New topics, such as animation, concept modeling, and logic transfer are covered in detail.

  • Digital Circuit Testing

    A Guide to DFT and Other Techniques
    • 1st Edition
    • Francis C. Wong
    • English
    Recent technological advances have created a testing crisis in the electronics industry--smaller, more highly integrated electronic circuits and new packaging techniques make it increasingly difficult to physically access test nodes. New testing methods are needed for the next generation of electronic equipment and a great deal of emphasis is being placed on the development of these methods. Some of the techniques now becoming popular include design for testability (DFT), built-in self-test (BIST), and automatic test vector generation (ATVG). This book will provide a practical introduction to these and other testing techniques. For each technique introduced, the author provides real-world examples so the reader can achieve a working knowledge of how to choose and apply these increasingly important testing methods.

  • Rheology and Elastohydrodynamic Lubrication

    • 1st Edition
    • B.O. Jacobson
    • English
    This book gives a thorough overview on recent developments in lubricant rheology, elastohydrodynamic lubrication and the effects of surface roughness and particulate contamination in the lubricant on the overall behaviour of a heavily loaded lubricated contact. One of the aims of the book is to make clear to the reader that a Newtonian model for the lubricant behaviour does not have enough degrees of freedom to be able to describe the friction - traction behaviour of heavily loaded lubricated contacts or the oil film build-up and collapse under surface asperities for rough surfaces. The book contains quite a lot of experimental data of lubricants at high pressures, both solidification pressures, compressibilities and shear strength increase coefficients, which make it possible to estimate the friction and power loss in heavily loaded lubricated contacts for different pressures, temperatures, sliding speeds, and lubricant types. This is the first time that data of this type has been included in a textbook and it is hoped that the questions highlighted will serve to initiate and guide future research in this field.

  • Vehicle Tribology

    • 1st Edition
    • M. Godet + 2 more
    • English
    Vehicle Tribology was chosen as the topic for the 17th Leeds-Lyon Symposium, as it was decided to be a timely opportunity to bring together experts of many disciplines connected with problems of emissions, particulates and energy efficiency associated with the automobile engine. The volume contains 55 papers divided into eighteen sessions.

  • Foundations of Genetic Algorithms 1991 (FOGA 1)

    • 1st Edition
    • Volume 1
    • Gregory J.E. Rawlins
    • English
    Foundations of Genetic Algorithms 1991 (FOGA 1) discusses the theoretical foundations of genetic algorithms (GA) and classifier systems. This book compiles research papers on selection and convergence, coding and representation, problem hardness, deception, classifier system design, variation and recombination, parallelization, and population divergence. Other topics include the non-uniform Walsh-schema transform; spurious correlations and premature convergence in genetic algorithms; and variable default hierarchy separation in a classifier system. The grammar-based genetic algorithm; conditions for implicit parallelism; and analysis of multi-point crossover are also elaborated. This text likewise covers the genetic algorithms for real parameter optimization and isomorphisms of genetic algorithms. This publication is a good reference for students and researchers interested in genetic algorithms.

  • Analog Circuit Design

    Art, Science and Personalities
    • 1st Edition
    • Jim Williams
    • English
    This book is far more than just another tutorial or reference guide - it's a tour through the world of analog design, combining theory and applications with the philosophies behind the design process. Readers will learn how leading analog circuit designers approach problems and how they think about solutions to those problems. They'll also learn about the `analog way' - a broad, flexible method of thinking about analog design tasks.

Related subjects