Skip to main content
View Cart

Books in Energy and power

Elsevier’s Energy and Power Collection offers the latest innovations in the energy transition with a focus on content that supports and advances the reduction of CO2 emissions. The collection includes content on solar, wind, geothermal, nuclear, biofuels and bioenergy, hydrogen and fuel cells, and addresses topics such as energy storage, efficiency, management, economics, and policy, among others.

  • 1999 ISES Solar World Congress

    • 1st Edition
    • December 15, 2000
    • G. Grossman
    • English
    These volumes of Proceedings are the record of the 1999 ISES Solar World Congress, held in Jerusalem, Israel on the 45th Anniversary of the International Solar Energy Society. The Congress was held under the theme Solar is Renewable, adequately representing a meeting on the threshold of the 21st Century. The event also marks the 20th anniversary of the Israeli Section of ISES, founded in 1979 - the year ISES celebrated its Silver Jubilee.A business track under the title of Solar Means Business included presentations and discussions on market implementation of solar technology. The Congress further included two panel discussions and two workshops, dealing with WIRE (World-wide Information System for Renewable Energy) and with IPMVP (International Performance Measurement.These proceeding consist of the Keynote Papers and presented papers.

  • Advanced Pulverized Coal Injection Technology and Blast Furnace Operation

    • 1st Edition
    • November 10, 2000
    • K. Ishii
    • English
    In order to reduce the cost of running blast furnaces (BFs), injected pulverized coal is used rather than coke to fire BFs. As a result of this, unburned fine materials are blown with the gas into the bosh and dead man areas with possible detrimental effects on gas flow and permeability of the coke column. The capacity of the furnace to consume these particles by solution loss is probably one of the limitations to coal injection. It is, therefore, important to understand the physicochemical and aerodynamic behaviour of fines including the change of in-furnace phenomena.The Committee of Pulverized Coal Combustion and In-Furnace Reaction in BF was set up in 1993 as a cooperative research of the Japan Society for the Promotion of Science (JSPS) and the Iron and Steel Institute (ISIJ) to evaluate research initiative into this problem.This book reports on the JSPS/ISIJ Committee's activities and describes the interpretation of findings drawn from combustion experiments and the results of live furnace applications, and furnace performance.

  • World Renewable Energy Congress VI

    Renewables: The Energy for the 21st Century
    • 1st Edition
    • September 26, 2000
    • A. A. M. Sayigh
    • English
    The World Renewable Energy Congress is a key event at the start of the 21st century.It is a vital forum for researchers with an interest in helping renewables to reach their full potential. The effects of global warming and pollution are becoming more apparent for all to see - and the development of renewable solutions to these problems is increasingly important globally.If you were unable to attend the conference, the proceedings will provide an invaluable comprehensive summary of the latest topics and papers.

  • Battery Reference Book

    • 3rd Edition
    • March 20, 2000
    • Thomas P J Crompton
    • English
    Crompton's Battery Reference Book has become the standard reference source for a wide range of professionals and students involved in designing, manufacturing, and specifying products and systems that use batteries. This book is unique in providing extensive data on specific battery types, manufacturers and suppliers, as well as covering the theory - an aspect of the book which makes an updated edition important for every professional's library. The coverage of different types of battery is fully comprehensive, ranging from minute button cells to large installations weighing several hundred tonnes.

  • China's Oil Industry and Market

    • 1st Edition
    • August 9, 1999
    • H.H. Wang
    • English
    This authoritative book on China's oil demand and government policies and practices rests on two essential foundations: first and foremost on the author's considerable knowledge of China's oil situation and prospects, together with his access to Chinese energy literature and data; and secondly, on that insight afforded to him and, therefore, his readers from his fluency in Chinese.The author analyzes the Chinese oil market and the rising pressure on Beijing to reform policies which constrain China's ability to meet soaring demand and to pay for crucial imports at a time of growing political and economic uncertainties. Dr Wang acknowledges the importance of China meeting its growing domestic oil demand, if at all possible, through national production. The sheer weight of China's population, and its burgeoning requirements as industrialization spreads into most regions, dwarfs the needs of others and places unprecedented strain on international oil trades.The author stresses the fact that the outcome is hard to define, yet the time required to tackle the nation's energy needs is not limitless. Moreover, he reminds the reader of the perennial difficulty in meeting widely disparate economic and energy needs in different regions of the vast country.

  • Measuring Current, Voltage and Power

    • 1st Edition
    • Volume 7
    • June 1, 1999
    • K. Iwansson + 3 more
    • English
    This authoritative new book focuses on recent developments in the instrumentation for sending voltages and currents. It covers new trends and challenges in the field, such as measurements of biocurrents, the increased speed of the components for data taking, testing of computers and integrated circuits where the measurement of rapid voltage and current variations on a very small geometrical scale is necessary. The first chapter concentrates on recent methods to sense voltages and currents, while the rest of the book investigates the applied side, covering for instance electrical power and energy measurements. The main purpose of this volume is to illustrate commonly employed techniques rather than track the scientific evolution and merits and therefore mainly covers patent literature aimed at industrial applications. It is an exciting addition, justifying the series' claim to cover state-of-the-art developments in both the applied and theoretical fields of sensors and actuators.The measurement of voltages and currents is a common task in the field of electricity and electronics. From a technical point of view it is useful to identify schematically different steps of such a measurement. In a first step a voltage or a current is sensed, intermediate steps such as amplification, transmission and further treatment may follow to yield the result in the final step. Today in most cases microprocessors perform the final steps of such measurements. Analog-to digital converters digitise a voltage that is proportional to the value to be measured and a processor performs further computations and handles the storage and the display of the results. The prerequisite for such measurements are sensors or transducers that respond in a known way to the voltage or current to be measured. The emphasis of this book is put on recent developments of the instrumentation for sensing voltages and currents.Aside from the general trend towards smaller, cheaper and more reliable instrumentation, new demands have arisen. New applications, like measurements of biocurrents, ask for higher sensitivities. Computers and integrated circuits pose new challenges. To exploit the increased speed of the components for data taking, suitable sensors are required. The accuracy that can be achieved depends more than ever on the first step, the acquisition of the raw data. The influence of the measurement process on the results becomes more crucial. Testing of integrated circuits themselves is a completely new application. For such tests one has to measure rapid voltage and current variations on very small geometrical scales. Here, as well as in the traditional high voltage applications, contactless measurements play an important role.The organisation of this book is as follows: In the first chapter different methods to sense voltages and currents are described. For the sake of completeness most commonly used methods are mentioned, we concentrate, however, on those developed recently. The chapters address the subject from the side of different applications in which voltages and currents are sensed.Since the main purpose of this publication is to illustrate commonly employed techniques rather than to track the scientific evolution and merits in particular fields, in general those publications that illustrate a particular measurement principle best have been cited. The citation of a particular reference does therefore not imply that this is the first or most pertinent publication in the respective field.

  • Greenhouse Gas Control Technologies

    • 1st Edition
    • May 20, 1999
    • B. Eliasson + 2 more
    • English
    These proceedings contain 270 papers outlining ideas and contributions to the new scientific, technical and political discipline of Greenhouse Gas (GHG) Control. The contributions were presented at the 4th International Conference on Greenhouse Gas Control Technologies (GHGT-4). It was the largest gathering of experts active in this new and fast-developing field.GHGT-4 was different from its predecessors in that it included all greenhouse gases, not only CO2, and all issues which could contribute to the mitigation of the greenhouse problem - technical, economic and political. The main focus was on practical solutions and real demonstrations of mitigation technology being planned and implemented today. It also addressed ways to increase the efficiency of power production and utilisation, and looked at proposals to encourage the development of renewable energy sources.During the Opening Session, 10 keynote addresses were heard from prominent personalities in government, industry and academia. To tackle this very inter-disciplinary problem and to achieve acceptable solutions, it is essential for industry and government to initiate intense dialogue and cooperation. Conferences like this can provide the opportunity for a meeting of minds between engineers and politicians in the face of global challenge. The primary attributes of this global challenge are manifold: the problem is global and international; it is inter-disciplinary, both in substance and approach; it covers technical, political and economic issues and involves government, science, industry and academia; it is complex and non-linear; and it will take the efforts of all parties involved to solve the problem.These proceedings contain ideas for starting demonstration projects and for making better use of the power and flexibility of market measures. They also show it is a problem we can influence and that there is a wealth of ideas. The challenge now is to find the right partners to put these ideas into action.

  • Transmission and Distribution Electrical Engineering

    • 2nd Edition
    • April 12, 1999
    • Colin Bayliss + 1 more
    • English
    This comprehensive treatment of the theory and practice encountered in the installation and design of transmission and distribution systems for electrical power has been updated and revised to provide the project engineer with all the latest, relevant information to design and specify the correct system for a particular application.

  • Architecture - Comfort and Energy

    • 1st Edition
    • February 22, 1999
    • M. Sala + 2 more
    • English
    In this book we seek to approach the architecture-energy combination and its relationship to human comfort and the environment .There are chapters on thermal comfort, low energy architecture dealing with various criterion for comfort in different parts of the World. The book also seeks to understand how previous generations lived in harsh climates and without abundant sources of energy, yet managed to design and build appropriate dwellings providing both comfort and harmony with the environment.Other chapters deal with the bioclimatic concept in Vernacular Architecture; the major role which climate plays at different locations and how this can dictate the shape and form of the buildings and save energy; the importance of micro-climate and its various elements and usage; ventilation and its importance in buildings and the technology for modern architecture.

  • New Insulators Devices and Radiation Effects

    • 1st Edition
    • Volume 3
    • February 11, 1999
    • English
    Silicon technology today forms the basis of a world-wide, multi-billion dollar component industry. The reason for this expansion can be found not only in the physical properties of silicon but also in the unique properties of the silicon-silicon dioxide interface. However, silicon devices are still subject to undesired electrical phenomena called "instabilities". These are due mostly to the imperfect nature of the insulators used, to the not-so-perfect silicon-insulator interface and to the generation of defects and ionization phenomena caused by radiation.The problem of instabilities is addressed in this volume, the third of this book series.Vol.3 updates and supplements the material presented in the previous two volumes, and devotes five chapters to the problems of radiation-matter and radiation-device interactions. The volume will aid circuit manufacturers and circuit users alike to relate unstable electrical parameters and characteristics to the presence of physical defects and impurities or to the radiation environment which caused them.

Related subjects