Books in Fossil fuels products and by products

Carbon Capture Technologies for Gas-Turbine-Based Power Plants

1st Edition
September 24, 2022
Hamidreza Gohari Darabkhani + 2 more
English
Paperback
9 7 8 0 1 2 8 1 8 8 6 8 2
eBook
9 7 8 0 1 2 8 1 8 8 6 9 9

Carbon Capture Technologies for Gas-Turbine-Based Power Plants explores current progress in one of the most capable technologies for carbon capture in gas-turbine-based power plants. It identifies the primary benefits and shortcomings of oxy-fuel combustion CO2 capture technology compared to other capture technologies such as pre-combustion and post-combustion capture. This book examines over 20 different oxy-combustion turbine (oxyturbine) power cycles by providing their main operational parameters, thermodynamics and process modelling, energy and exergy analysis and performance evaluation. The conventional natural gas combined cycle (NGCC) power plant with post-combustion capture used as the base-case scenario. The design procedure and operational characteristics of a radial NOx-less oxy-fuel gas turbine combustor are presented with CFD simulation and performance analysis of the heat exchanger network and turbomachinery. Overview of oxygen production and air separation units (ASU) and CO2 compression and purification units (CPU) are also presented and discussed. The most advanced stages of development for the leading oxyturbine power cycles are assessed using techno-economic analysis, sensitivity, risk assessments and levelized cost of energy (LCOE) and analysing technology readiness level (TRL) and development stages. The book concludes with a road map for the development of future gas turbine-based power plants with full carbon capture capabilities using the experiences of the recently demonstrated cycles.

Surface Production Operations: Volume 5: Pressure Vessels, Heat Exchangers, and Aboveground Storage Tanks

1st Edition
July 22, 2021
Maurice Stewart
English
Hardback
9 7 8 0 1 2 8 0 3 7 2 2 5
eBook
9 7 8 0 1 2 8 0 3 7 4 4 7

Covering both upstream and downstream oil and gas facilities, Surface Production Operations: Volume 5: Pressure Vessels, Heat Exchangers, and Aboveground Storage Tanks delivers a must-have reference guide to maximize efficiency, increase performance, prevent failures, and reduce costs. Every engineer and equipment manager in oil and gas must have complete knowledge of the systems and equipment involved for each project and facility, especially the checklist to keep up with maintenance and inspection--a topic just as critical as design and performance. Taking the guesswork out of searching through a variety of generalized standards and codes, Surface Production Operations: Volume 5: Pressure Vessels, Heat Exchangers, and Aboveground Storage Tanks furnishes all the critical regulatory information needed for oil and gas specific projects, saving time and money on maintaining the lifecycle of mechanical integrity of the oil and gas facility. Including troubleshooting techniques, calculations with examples, and several significant illustrations, this critical volume within the Surface Production Operations series is crucial on every oil and gas engineer’s bookshelf to solve day-to-day problems with common sense solutions.

Dry Syngas Purification Processes for Coal Gasification Systems

1st Edition
October 18, 2020
Makoto Kobayashi
English
Paperback
9 7 8 0 1 2 8 1 8 8 6 6 8
eBook
9 7 8 0 1 2 8 1 8 8 6 7 5

Dry Syngas Purification Processes for Coal Gasification Systems illustrates the promising development status of dry syngas purification for various power generation systems based on coal gasification. The core advantages of dry syngas purification, methodologies for impurity measurement, sorbents development, and evaluation of process performance are described in-depth, and from a practical perspective that is based on current research and development. Reviewing key findings from process integration, the book encompasses scale-up strategies from pilot processes to achieve dry syngas processing for new build plants. The book provides researchers and engineers with practical information to realize dry syngas purification processes for each context.

Advances in Carbon Capture

1st Edition
August 4, 2020
Mohammad Reza Rahimpour + 2 more
English
Paperback
9 7 8 0 1 2 8 1 9 6 5 7 1
eBook
9 7 8 0 1 2 8 2 2 7 5 8 9

Advances in Carbon Capture reviews major implementations of CO2 capture, including absorption, adsorption, permeation and biological techniques. For each approach, key benefits and drawbacks of separation methods and technologies, perspectives on CO2 reuse and conversion, and pathways for future CO2 capture research are explored in depth. The work presents a comprehensive comparison of capture technologies. In addition, the alternatives for CO2 separation from various feeds are investigated based on process economics, flexibility, industrial aspects, purification level and environmental viewpoints.

Methanol

1st Edition
October 31, 2017
Angelo Basile + 1 more
English
Paperback
9 7 8 0 4 4 4 6 3 9 0 3 5
eBook
9 7 8 0 4 4 4 6 4 0 1 0 9

Methanol: Science and Engineering provides a comprehensive review of the chemistry, properties, and current and potential uses and applications of methanol. Divided into four parts, the book begins with a detailed account of current production methods and their economics. The second part deals with the applications of methanol, providing useful insights into future applications. Modeling of the various reactor systems is covered in the next section, with final discussions in the book focusing on the economic and environmental impact of this chemical. Users will find this to be a must-have resource for all researchers and engineers studying alternative energy sources.

Carbon Capture and Storage

2nd Edition
September 5, 2017
Steve A. Rackley
English
Paperback
9 7 8 0 1 2 8 1 2 0 4 1 5
eBook
9 7 8 0 1 2 8 1 2 0 4 2 2

Carbon Capture and Storage, Second Edition, provides a thorough, non-specialist introduction to technologies aimed at reducing greenhouse gas emissions from burning fossil fuels during power generation and other energy-intensive industrial processes, such as steelmaking. Extensively revised and updated, this second edition provides detailed coverage of key carbon dioxide capture methods along with an examination of the most promising techniques for carbon storage. The book opens with an introductory section that provides background regarding the need to reduce greenhouse gas emissions, an overview of carbon capture and storage (CCS) technologies, and a primer in the fundamentals of power generation. The next chapters focus on key carbon capture technologies, including absorption, adsorption, and membrane-based systems, addressing their applications in both the power and non-power sectors. New for the second edition, a dedicated section on geological storage of carbon dioxide follows, with chapters addressing the relevant features, events, and processes (FEP) associated with this scenario. Non-geological storage methods such as ocean storage and storage in terrestrial ecosystems are the subject of the final group of chapters. A chapter on carbon dioxide transportation is also included. This extensively revised and expanded second edition will be a valuable resource for power plant engineers, chemical engineers, geological engineers, environmental engineers, and industrial engineers seeking a concise, yet authoritative one-volume overview of this field. Researchers, consultants, and policy makers entering this discipline also will benefit from this reference.

Direct Methane to Methanol

1st Edition
January 30, 2014
Vladimir Arutyunov
English
Hardback
9 7 8 0 4 4 4 6 3 2 5 3 1
eBook
9 7 8 0 4 4 4 6 3 2 5 1 7

Direct Methane to Methanol: Foundations and Prospects of the Process offers a state-of-the-art account of one of the most interesting and potentially commercial technologies for direct conversion of natural gas into valuable chemicals. The book thoroughly explains the complex and unusual chemistry of the process, as well as possible applications for direct methane to methanol (DMTM). It covers topics involving thermokinetics, pressure, direct oxidation of heavier alkanes, and more, and provides detailed appendices with experimental data and product yields. This book provides all those who work in the field of gas processing and gas chemistry with the theory and experimental data to develop and apply new processes based on direct oxidation of natural gas. All those who deal with oil and natural gas production and processing will learn about this promising technology for the conversion of gas into more valuable chemicals.

Produced Water Treatment Field Manual

1st Edition
July 13, 2011
Maurice Stewart + 1 more
English
Paperback
9 7 8 1 8 5 6 1 7 9 8 4 3

Produced Water Treatment Field Manual presents different methods used in produced water treatment systems in the oil and gas industry. Produced water is salty water that is produced as a byproduct along with oil or gas during the treatment. Water is brought along with the oil and gas when these are lifted from the surface. The water is then treated before the discharge or re-injection process. In the introduction, the book discusses the basic terms and concepts that describe produced water treatment. It also presents the different methods involved in the treatment. It further discusses the design, operation, maintenance, and sizing of the produced water treatment systems. In the latter part of the book, the ways to remove impurities in water are discussed, including choosing the proper filter, filtering equipment, filtering methods, and filtering types. The main objective of this book is to provide information about proper water management. Readers who are involved in this field will find this book relevant.

Life Sciences

Physical Sciences & Engineering

Social Sciences & Humanities

Health