Skip to main content
View Cart

Newnes

  • Embedded Controller Hardware Design

    • 1st Edition
    • December 20, 2000
    • Ken Arnold
    • English
    Ken Arnold is an experienced embedded systems designer and president of HiTech Equipment, Inc., an embedded systems design firm located in San Diego, California. He also teaches courses in embedded hardware and software design at the University of California-San Diego.

  • Understand Electronic Control Systems

    • 1st Edition
    • December 18, 2000
    • Owen Bishop
    • English
    Once again Owen Bishop has produced a concise, readable text to introduce a wide range of students, technicians and professionals to an important area of electronics. Control is a highly mathematical subject, but here maths is kept to a minimum, with flow charts to illustrate principles and techniques instead of equations. Cutting edge topics such as microcontrollers, neural networks and fuzzy control are all here, making this an ideal refresher course for those working in industry. Basic principles, control algorithms and hardwired control systems are also fully covered so the resulting book is a comprehensive text and well suited for college courses or background reading for university students. The text is supported by questions under the headings Keeping Up and Test Your Knowledge so that the reader can develop a sound understanding and the ability to apply the techniques they are learning. These features are particularly useful for independent study or courses with limited contact time. Owen Bishop is one of the world's leading electronics authors, with a loyal following among electronics enthusiasts and an established reputation as a textbook author.

  • Interfacing with C

    • 2nd Edition
    • December 14, 2000
    • Howard Hutchings + 1 more
    • English
    Interfacing with C is about interfacing personal computers using C. Anyone who is interested in ports, transducer interfacing, analog to digital conversion, convolution, filters or digital/analog conversion will benefit from reading Interfacing with C. Students will also find this a practical introduction to real-time programming with a generous collection of tried and tested programs.The pace of the book is such that the reader is encouraged to run the programs and experiment with C. The principles precede the applications in most cases in an attempt to provide genuine understanding and encourage further development. Readers will gain much from the hands-on experience the authors' approach provides, an approach designed to enable readers to climb steep learning curves with the minimum amount of assistance. The many programs included in the text provide the essential hands-on experience. Some of the programs inevitably become rather lengthy, so the source code used is available as a free download from the Newnes website. The aim of the book, however, is to give the reader enough confidence to rewrite and improve these programs.In the second edition Mike James has thoroughly updated all aspects relating to software, operating systems and graphical interfaces. He has also increased the scope of the book to include current forms of C++. Material on data acquisition has been thoroughly updated and the section on peripherals increased.

  • Reliability, Maintainability and Risk

    • 6th Edition
    • December 14, 2000
    • David J. Smith
    • English
    Reliability, Maintainability and Risk has been updated to ensure that it remains the leading reliability textbook and cementing the book's reputation for staying one step ahead of the competition. This 6th edition incorporates brand new material on the accuracy of reliability prediction and common cause failure based on the author's PhD research work. David J. Smith approaches these subjects from an entirely original and unique viewpoint, emphasising that the need to demonstrate that safety-related systems have been assessed against target integrity levels is now commonplace in most industries, and the material contained in this book will address these growing needs.Reliability, Maintainability and Risk has now been established for over 20 years. It deals with all aspects of reliability, maintainability and safety-related failures in a simple and straightforward style, explaining technical terms and jargon and handling the imitations of reliability parameters. It pre-supposes no prior knowledge of the subject - the author deals with numerical data making realistic predictions using the minimum of mathematics.David J. Smith has written seven successful works on reliability, quality, maintainability, software and statistics and is past Chairman of the Safety and Reliability Society. He has been directly concerned with this branch of engineering in the telecommunications, electronics and oil and gas industries for over 25 years. He is well known for his many courses and workshops on reliability engineering and software quality and is in a unique position to provide much-needed information on a burgeoning subject area.

  • Lubrication and Reliability Handbook

    • 1st Edition
    • December 8, 2000
    • Michael J Neale
    • English
    This handbook helps engineers in industry with the operation and maintenance of machinery. It provides the information that these engineers need in a form that is instantly accessible and easy to read.The manufacturers of machinery give guidelines on the operation, lubrication and maintenance required for their particular equipment. There are however many different machines in an industrial plant or service organisation, often supplied by many different manufacturers, and there is a need to select as many similar lubricants as possible and to use related machine techniques. This book bridges the gap which exists between the available data on the various machines by providing overall guidance on how to co-ordinate the recommendations of the various equipment makers.The book is structured in a number of sections that will make it easier to use, and to bring together related topics so that when a reader is focusing on a particular problem they can also refer to related material that is also likely to be of interest.

  • Sensors and Transducers

    • 3rd Edition
    • December 5, 2000
    • Ian Sinclair
    • English
    In this book Ian Sinclair provides the practical knowhow required by technician engineers, systems designers and students. The focus is firmly on understanding the technologies and their different applications, not a mathematical approach. The result is a highly readable text which provides a unique introduction to the selection and application of sensors, transducers and switches, and a grounding in the practicalities of designing with these devices.The devices covered encompass heat, light and motion, environmental sensing, sensing in industrial control, and signal-carrying and non-signal switches.

  • Radio and Electronics Cookbook

    • 1st Edition
    • November 28, 2000
    • RSGB
    • English
    Radio and Electronics Cookbook is a unique collection of electronics projects, ideal for all electronics enthusiasts and experimenters. The simple step-by-step instructions also make this book ideal for amateurs seeking to build up their electronics skills and knowledge. The projects draw on the massive enthusiasm and design know-how of the RSGB, the UK's leading federation of radio amateurs. Only a basic acquaintance with electronics construction is assumed, with clear step-by-step instructions and numerous illustrations supplied throughout. The projects are also supported with features on the electronics involved. The circuits themselves provide a wealth of quick, rewarding construction projects ranging from radio receivers and amplifiers to test equipment, a moisture meter, a desk microphone, a water level alarm, and Christmas tree LEDs.

  • Microcontroller Cookbook

    • 2nd Edition
    • November 20, 2000
    • Mike James
    • English
    Microcontroller Cookbook guides you through programming, interfacing, development work and circuit design using two of the most popular microcontroller families. The cookbook approach makes this an ideal book for anyone who has to get up and running quickly, so it is ideal for hard-pressed professionals and advanced electronics hobbyists. Enough theory is included to make this a suitable text for introductory microelecronics courses up to first year degree level. New sections of reviews make this an ideal text for courses or independent study. The new edition offers additional material on C programming and the use of compilers, an expanded section on macros, and a new section on the development of source code.

  • Passive Components for Circuit Design

    • 1st Edition
    • November 20, 2000
    • Ian Sinclair
    • English
    Passive Components for Circuit Design is a unique introduction to this key area of analog electronics designed for technician engineers and anyone involved in circuit design. The coverage encompasses all component types capable of power amplification: resistors, capacitors, transformers, solenoids, motors and transducers. The behaviour of the components is explored along with the different types available and the principles of circuit design. Tolerances, stability, variation with temperature, reliability and manufacturing standards are all covered. Reading this book will improve your skills in component selection and analog circuit design. These are essential skills not only for the analog designer, but for all circuit designers, professional or amateur.

  • TPM - A Route to World Class Performance

    A Route to World Class Performance
    • 2nd Edition
    • November 17, 2000
    • Peter Willmott + 1 more
    • English
    Total productive maintenance (TPM), a Japanese management protocol developed to alleviate production losses caused by machine breakdowns has moved on.Through TPM, more companies accept the concept of Zero Breakdowns as achievable. From the foundation of zero breakdowns, world class plants are able to run for complete shifts without the need for intervention. TPM is still pushing back the boundaries of what was thought possible. Driven by the proven principles of TPM, the book emphasises the need to build on existing good practices and to win commitment by delivering results. The book provides a practical guide to delivering TPM benefits and is based on the authors' first hand experience of seeing TPM in Japan. It adapts these benefits to suit the strategic needs of companies across four continents. "TPM A Route to World Class Performance" builds on Peter Willmott's earlier book, "TPM the Western Way", updating the scope of applications and tools. The TPM route map is updated to include the journey to zero breakdowns and beyond. It also provides a systematic structure to evolve from the classic Total Productive Maintenance towards Total Productive Manufacturing and deliver a Totally Productive Operation capable of world leading performance.

Browse by Publisher