Skip to main content
Elsevier
View Cart
openUserAccount

Books in Energy and power

Elsevier’s Energy and Power Collection offers the latest innovations in the energy transition with a focus on content that supports and advances the reduction of CO2 emissions. The collection includes content on solar, wind, geothermal, nuclear, biofuels and bioenergy, hydrogen and fuel cells, and addresses topics such as energy storage, efficiency, management, economics, and policy, among others.

BooksJournals
1421-1430 of 1436 results in All results

SI Units in Engineering and Technology

  • 1st Edition
  • May 21, 1977
  • S.H. Qasim
  • English
  • eBook
    9 7 8 - 1 - 4 8 3 2 - 9 3 0 4 - 2
SI Units in Engineering and Technology focuses on the use of the International System of Units-Systeme International d'Unités (SI). The publication first elaborates on the SI, derivation of important engineering units, and derived SI units in science and engineering. Discussions focus on applied mechanics in mechanical engineering, electrical and magnetic units, stress and pressure, work and energy, power and force, and magnitude of SI units. The text then examines SI units conversion tables and engineering data in SI units. Tables include details on the sectional properties of metals in SI units, physical properties of important molded plastics, important physical constants expressed in SI units, and temperature, area, volume, and mass conversion. Tables that show the mathematical constants, standard values expressed in SI units, and Tex count conversion are also presented. The publication is a dependable source of data for researchers interested in the use of the International System of Units-Systeme International d'Unités.

Sulfur, Energy, and Environment

  • 1st Edition
  • January 1, 1977
  • Beat Meyer
  • English
  • eBook
    9 7 8 - 1 - 4 8 3 1 - 6 3 4 6 - 8
Sulfur, Energy, and Environment is a guide to the properties of sulfur; its three important compounds; and a review of the production, use, and recovery of sulfur in relation to energy production and environmental protection. After a brief introduction to the history of sulfur, the chemical properties of the element and some important compounds are reviewed, using common analytical methods. Sulfur is a strategic chemical in many modern applications and may make headway into high-volume non-chemical uses as it is being modified according to our changing technology and needs. The sources of sulfur and where it frequently occurs is explained. This discussion is followed by citing reviews of the four most important cycles, that is, the global sulfur cycle, hydrosphere, atmospheric sulfur budget, and the anthropogenic sulfur cycle. Sulfur production methods, coal combustion chemistry, and flue gas desulfurization are then described. The many uses of sulfur are described, including in medicine, agriculture, chemical industry, and the plastic industry. However, throughout the production of sulfur, problems affecting the environment occur, so environmental control and legislation are also discussed. Finally, the trends of sulfur research, production, use and recovery, role of chemistry, and the future overall area where science, energy, chemistry, and the environment exist together are presented. Chemists and chemistry students, industrialists, and environmental planners will find this guide to sulfur helpful. Lecturers in chemistry and researchers in the many fields of application of sulfur will likewise benefit from it.

Living Systems as Energy Converters

  • 1st Edition
  • January 1, 1977
  • R. Buvet + 2 more
  • English
  • eBook
    9 7 8 - 1 - 4 8 3 1 - 6 3 7 8 - 9
Living Systems as Energy Converters documents the proceedings of the European Conference on Living Systems as Energy Converters held in Pont-a-Mousson, France on October 18-22, 1976. This book is organized into three main topics—energy in biological molecules; biological membranes as energy transducers; and energy in cells, organisms, and populations. In these topics, this compilation specifically discusses the energetic evolution of complex networks of reactions; protein ß-structure and the molecular evolution of biological energy conversion; and structure and function of ATP synthase. The calcium transport in biological membranes; conversion of solar energy into energy-rich phosphate compounds; and energy conservation in photosynthetic electron transport of chloroplasts are also deliberated. This text likewise covers the direct conversion of radiant into electrical energy using plant systems; energy budgets in natural and agricultural ecosystems; and recycling of excess carbon dioxide from fossil energy conversion by plants. This publication is intended for biologists and physical-chemists, including students concerned with the study of living systems as energy converters.

Physics of High-Temperature Reactors

  • 1st Edition
  • January 1, 1976
  • Luigi Massimo
  • English
  • eBook
    9 7 8 - 1 - 4 8 3 2 - 8 0 2 8 - 8
Physics of High-Temperature Reactors focuses on the physics of high-temperature reactors (HTRs) and covers topics ranging from fuel cycles and refueling strategies to neutron cross-sections, transport and diffusion theory, and resonance absorption. Spectrum calculations and cross-section averaging are also discussed, along with the temperature coefficient and reactor control. Comprised of 16 chapters, this book begins with a general description of the HTR core as well as its performance limitations. The next chapter deals with general considerations about HTR physics, including quantities to be determined and optimized in the design of nuclear reactors. Potential scattering and resonance reactions between neutrons and atomic nuclei are then considered, together with basic aspects of transport and diffusion theory. Subsequent chapters explore methods for solving the diffusion equation; slowing-down and neutron thermalization in graphite; HTR core design, fuel management, and cost calculations; and core dynamics and accident analysis. The final chapter describes the sequence of reactor design calculations. This monograph is written primarily for students of HTR physics who are preparing to enter the field as well as technologists of other disciplines who are working on the system.

Energy and Housing

  • 1st Edition
  • January 1, 1975
  • C. B. Wilson + 2 more
  • English
  • eBook
    9 7 8 - 1 - 4 8 3 1 - 3 8 5 4 - 1
Energy and Housing examines the problem of power for houses and energy for building materials and considers ways of reducing the energy consumed in domestic housing. Emphasis is more on the running energy costs than on the capital energy cost of building materials and construction. This book is comprised of 12 chapters and begins by describing two types of fluidic wall attachment devices for controlling hot water flow in a domestic heating circuit, followed by a discussion on the thermal performances of well-insulated houses having thermally heavy interiors and thermally light interiors and similar overall U-values. Subsequent chapters focus on how buildings provide protection from the climate and the problem of flexibility in thermal comfort; the energy cost of the construction and habitation of timber frame housing; the capital energy requirements of buildings; and the use of winter sunshine to heat buildings. A model that describes the thermal response of a solar heated building is also considered, along with the use of solar energy for housing and some problems associated with the design of low-energy housing. The final chapter evaluates the socioeconomic, environmental, and political implications of minimizing energy costs in buildings. This monograph will be of interest to energy and housing officials and policymakers.

Energy in Perspective

  • 1st Edition
  • January 1, 1974
  • Jerry B. Marion
  • English
  • eBook
    9 7 8 - 1 - 4 8 3 2 - 6 0 2 1 - 1
Energy in Perspective attempts to place the 1973 ""energy crisis"" in perspective. It discusses sources of energy, its uses, and the projections for the future. It is concerned primarily with the patterns of energy consumption, the fuels required to produce this energy, and the effect that energy usage is having on the environment. It examines the overall situation and discusses both the short-term problems and the long-term outlook. Emphasis is given to questions of fuel supplies and new energy technologies rather than crisis remedies such as gasoline rationing, reduced speed limits, and fuel oil allocations. The book also engages in an exercise of ""futurism"": How much energy will be needed in the year 2000? In the year 2050? How much fuel can be extracted from the Earth by these dates? What new technologies will be available in 25 or 75 years? This book is intended for use in classroom courses as a text or supplementary text and for individual reading. It is not intended as a sourcebook of new and authoritative data. The figures, estimates, and projections given here are not original; instead, they represent what the author believes to be the most reliable information and the most reasonable projections available at present.

Texas National Energy Modeling Project

  • 1st Edition
  • July 21, 1970
  • Milton L. Holloway
  • English
  • eBook
    9 7 8 - 1 - 4 8 3 2 - 6 0 9 0 - 7
Texas National Energy Modeling Project: An Experience in Large-Scale Model Transfer and Evaluation reports on the Texas National Energy Model Project (TNEMP) experience. The TNEP was tasked with providing an independent evaluation of the Energy Information Administration's (EIA) Midterm Energy Forecasting System. It also provided recommendations to the Texas Energy Advisory Council concerning the maintenance of a national modeling system by the Council to evaluate Texas impacts within a consistent national modeling framework. The book provides all of the summary material documenting the entire experience, sequentially, from beginning to end. It first lays out the purposes of TNEMP, the organizational structure for the study, and an explanation of the evaluation criteria used to guide the model critiques. It summarizes in some detail the important findings of each of the 11 studies contained in Part II published under a separate cover. It presents the National Advisory Board’s assessment of the integrity of the evaluation project, their views of important outcomes of the TNEMP experience, and important recommendations to TNEMP and EIA. The final chapters contain an overview reply by EIA and a summary of a workshop held at the end of the project to discuss substantive issues raised by TNEMP.

Energy Conversion Statics

  • 1st Edition
  • January 1, 1969
  • H. K. Messerle
  • Henry G. Booker + 1 more
  • English
  • eBook
    9 7 8 - 1 - 4 8 3 2 - 8 2 2 3 - 7
Energy Conversion Statics deals with equilibrium situations and processes linking equilibrium states. A development of the basic theory of energy conversion statics and its applications is presented. In the applications the emphasis is on processes involving electrical energy. The text commences by introducing the general concept of energy with a survey of primary and secondary energy forms, their availability, and use. The second chapter presents the basic laws of energy conversion. Four postulates defining the overall range of applicability of the general theory are set out, demonstrating the basic importance of the stored energy function. Subsequent chapters extend the concept of the energy function as a state function; introduce transformed functions like coenergy; describe the concept of quasi-static processes; and develop general theorems for one-way and cyclic processes. The remainder of the text deals with specific fields of energy conversion and the basic theory developed in the first four chapters is used. The book is intended for students in the final year of an undergraduate course and it can be used as the basis for graduate courses in energy conversion. It may also be used as a basic text for courses in thermodynamics and electromechanics.

Methods of Working Coal and Metal Mines

  • 1st Edition
  • January 1, 1966
  • Seth D. Woodruff
  • English
  • eBook
    9 7 8 - 1 - 4 8 3 1 - 5 6 1 8 - 7
Methods of Working Coal and Metal Mines, Volume 3 discusses the extraction of mineral deposits, which involves the driving of development openings, from the surface or a central shaft, to the “block out” portions of the deposit. This book is divided into three parts. Part A describes the coal mining methods, which include pillar mining systems and long-wall mining. Economics of coal face mechanization is also discussed. In Part B, the classification of stoping systems, which is comprised of pillar-supported stopes, timber and fill supported stopes, and slicing or caving systems, is elaborated. This part also emphasizes the mining bedded metalliferous ores, as well as the costs and other factors affecting the choice of mining systems. Part C deliberates the surface mining methods, which consist of strip mining of coal, open-pit mining, and stability of pit slopes. This publication is intended for mining engineers, but is also useful to students and researchers conducting work on the application of extracting and processing minerals.

The Strength, Fracture and Workability of Coal

  • 1st Edition
  • January 1, 1966
  • Ivor Evans + 1 more
  • English
  • eBook
    9 7 8 - 1 - 4 8 3 2 - 2 1 3 6 - 6
The Strength, Fracture and Workability of Coal deals with the strength of coal and the way in which various aspects of strength enter into the processes of mechanical winning. This book aims to provide rationalization of the design of coal winning machines for use in British mines and an increase of efficiency in existing machines. This book is composed of 14 chapters, and begins with a description of a stratified structure comprising a number of components of coal. This topic is followed by detailed measurements on a bituminous and an anthracite coal using static and dynamic techniques. The subsequent chapters are devoted to the definition and determination of coal's mechanical properties, such as compressive, tensile, and routine strength, particle size distribution, breakage, friction, and wedge penetration. The concluding chapters cover the mechanics of certain possible modes of interaction of coal and tool. These chapters also examine the theoretical aspects of the cutting and ploughing of coal. This book will prove useful to coal mining engineers, designers, and researchers.

Related subjects

Electric power

Energy conservation and environment

Energy general

Energy policy business and economics

Fossil fuels

Nuclear energy and engineering

Renewable energy and alternative technologies