Journals in Physical sciences and engineering
Journals in Physical sciences and engineering
Rangelands
Rangelands publishes articles on the current state of the science and art of rangeland management. As a publication of the Society for Range Management, Rangelands provides readers relevant information founded in the current rangeland science and management knowledge base in an approachable format. Rangeland management occurs at the nexus of ecology, soil science, hydrology, animal science, economics, social science, policy, and culture, and each peer-reviewed issue of Rangelands synthesizes these diverse fields for a wide community of land owners, rangeland managers, researchers, educators, and policymakers. Rangelands articles are more accessible and contextualized than typical of a traditional research journal while maintaining a high level of scientific merit and quality.If you are a member of the Society for Range Management, please read here for more information about how to access the journals.- ISSN: 0190-0528
Annals of Nuclear Energy
Annals of Nuclear Energy provides an international medium for the communication of original research, ideas and developments in all areas of the field of nuclear energy science and technology. Its scope embraces nuclear fuel reserves, fuel cycles and cost, materials, processing, system and component technology (fission only), design and optimization, direct conversion of nuclear energy sources, environmental control, reactor physics, heat transfer and fluid dynamics, structural analysis, fuel management, future developments, nuclear fuel and safety, nuclear aerosol, neutron physics, computer technology (both software and hardware), risk assessment, radioactive waste disposal and reactor thermal hydraulics. Papers submitted to Annals need to demonstrate a clear link to nuclear power generation/nuclear engineering. Papers which deal with pure nuclear physics, pure health physics, imaging, or attenuation and shielding properties of concretes and various geological materials are not within the scope of the journal. Also, papers that deal with policy or economics are not within the scope of the journal. Please read these guidelines for papers submitted to Annals which deal with computer codes and simulations.This journal welcomes contributions that support and advance the UN's sustainable development goals, in particular SDG 7 (Affordable and clean energy) and SDG 13 (Climate Action)- ISSN: 0306-4549
Microelectronics Reliability
Microelectronics Reliability, is dedicated to disseminating the latest research results and related information on the reliability of microelectronic devices, circuits and systems, from materials, process and manufacturing, to design, testing and operation. The coverage of the journal includes the following topics: measurement, understanding and analysis; evaluation and prediction; modelling and simulation; methodologies and mitigation. Papers which combine reliability with other important areas of microelectronics engineering, such as design, fabrication, integration, testing, and field operation will also be welcome, and practical papers reporting case studies in the field and specific application domains are particularly encouraged.Most accepted papers will be published as Research Papers, describing significant advances and completed work. Papers reviewing important developing topics of general interest may be accepted for publication as Review Papers. All contributions are subject to peer review by leading experts in the field. Special issues are devoted to significant international conferences, or to important developing topics.Microelectron... Reliability is an indispensable forum for the exchange of knowledge and experience between microelectronics reliability professionals from both academic and industrial environments, and all those associated in any way with a steadily growing microelectronics industry and its many fields of application.- ISSN: 0026-2714
Journal of Luminescence
Journal of Luminescence is an interdisciplinary journal of research on the excited state processes on condensed matter. The journal provides a means of communication between scientists in different disciplines who share a common interest in the electronic excited states of molecular, ionic and covalent systems, whether crystalline, amorphous, or liquid. Submissions in the traditional areas of optical spectroscopy (absorption, magnetic circular dichroism, luminescence, Raman scattering, radiative & non-radiative relaxation) are welcome. Papers on applications (phosphors, scintillators, photochromism, electro- and cathodo-luminescence... radiography, bioimaging, solar energy, energy conversion, etc.) are also welcome if they present results of scientific, rather than only technological interests.The journal publishes topics including but not limited to: exciton and polariton dynamics, dynamics of localized excited states, energy and charge transport in ordered and disordered systems, vibronic interactions in electronic excited states, photophysics and photochemistry in condensed systems, excited state resonance, spin dynamics, hole burning, coherent processes in excited states, multiphoton processes, optical bistability and new techniques for the study of excited states.The journal does not accept submissions containing purely theoretical results not related to excited-state phenomena, reporting new measurements without contribution for understanding excited-state phenomena, or using luminescence spectroscopy to perform merely analytical chemistry or biochemistry procedures. Some exceptions will be possible at the discretion of the editors.- ISSN: 0022-2313
Journal of Membrane Science
The Journal of Membrane Science provides a focal point for academic and industrial chemists, chemical engineers, materials scientists, and membranologists working on membrane systems.Primary emphasis is on structure, function, and performance of non-biological membranes; papers bridging the gap with biological membranes are also appropriate.The journal publishes topics including:Membrane transportMembrane formation / structureFoulingModu... / process designFoulingProcess... / applicationsAuthors interested in submitting a Review Article or Perspective paper should contact the Co-Editors-in-Chief ([email protected] and [email protected]) prior to submission to discuss the scope and appropriateness of the proposed contribution.Endorse... by the Aseanian, European and North American Membrane Societies.- ISSN: 0376-7388
Renewable & Sustainable Energy Reviews
The mission of Renewable and Sustainable Energy Reviews is to communicate the most interesting and relevant critical thinking in renewable and sustainable energy in order to bring together the research community, the private sector and policy and decision makers. The aim of the journal is to share problems, solutions, novel ideas and technologies to support sustainable development, the transition to a low carbon future and achieve the emissions targets as established by the United Nations Framework Convention on Climate Change.Renewable and Sustainable Energy Reviews publishes review papers, new technology analyses with respect to existing literature and original research studies that have a significant review element, which may take the form of a critique, comparison, or analysis. A bibliographic literature review, as well as country specific reviews are not considered suitable.The journal considers articles on the following themes, provided the link to renewable and sustainable energy is clear and thoroughly examined:Energy resources - bioresources (e.g. biomass, waste), fossil fuels (including natural gas) related to sustainability of systems, geothermal, hydrogen, hydropower, marine and ocean energy, solar and windApplications - buildings, industry and transport including information communication systems related to the improvement of system performanceUtilizati... - batteries, conversion technologies, fuel cells, storage technologies, technical developments and technology scalingEnvironment - atmosphere, climate issues, meteorology, mitigation technologies (e.g. carbon capture and storage (CCS), carbon capture and utilization (CCU), and solar radiation management)Techno-so... aspects - health, industry, policy, regulatory, social (e.g. access, education, equality, equity)Systems - carbon accounting, energy-food-water nexus, energy modelling, life cycle assessment (LCA), nutrient-energy-wate... (NEW) nexus, smart infrastructureSustai... - the United Nations Sustainability Development Goals (SDGs)Ocean systems - ocean technology, ocean exploration, environmental protection of the oceans.This journal welcomes contributions that support and advance the UN's sustainable development goals, in particular SDG 7 (Affordable and clean energy) and SDG 13 (Climate Action)- ISSN: 1364-0321
Sedimentary Geology
An International Journal of Pure and Applied SedimentologySedimen... Geology is a journal that rapidly publishes high quality, original research and review papers that cover all aspects of sediments and sedimentary rocks at all spatial and temporal scales. Submitted papers must make a SIGNIFICANT CONTRIBUTION to the field of study and must place the research in a BROAD CONTEXT , so that it is of interest to the DIVERSE, INTERNATIONAL READERSHIP of the journal. Papers that are largely descriptive in nature, of limited scope or local geographical significance, or based on limited data will not be considered for publication.This journal welcomes contributions that support and advance the UN's sustainable development goals- ISSN: 0037-0738
Polymer
The International Journal for the Science and Technology of PolymersPolymer is an interdisciplinary journal dedicated to publishing innovative and significant advances in Polymer Physics, Chemistry, and Technology. We welcome submissions on polymer chemistry, polymer physics, polymer hybrids, nanocomposites, characterisation and self-assembly. Polymer also publishes work on the technological application of polymers in energy and optoelectronics as well as biomedical applications. We also publish reviews, but only upon invitation from a member of the editorial team. Authors wishing to publish a review are encouraged to share their intended topic and scope with one of our editorial team members, who can provide feedback as to whether Polymer would be the right journal for the proposed review.Polymer’s main scope is covered but not limited to the following core areas:Polymer MaterialsNanocomposi... and hybrid nanomaterialsPolymer blends, films, fibres, networks and porous materialsPhysical CharacterizationChar... modelling and simulation* of molecular and materials properties in bulk, solution, and thin filmsPolymer EngineeringAdvanced multiscale processing methodsPolymer Synthesis, Modification and Self-assemblyIncludi... designer polymer architectures, mechanisms and kinetics, and supramolecular polymerizationTechno... ApplicationsPolymers for energy generation and storagePolymer membranes for separation applications, barrier packaging, and controlled deliveryPolymers for opto- and microelectronicsPoly... for biomedical applications*Theory and simulation papers should include or reference previously published experimental results. The scope of Polymer no longer includes the biomedical applications of polymers. We would strongly recommend that authors consider submitting these papers to our sister title European Polymer Journal.Polymer publishes the following article types: original research papers, review articles, featured articles, short communications and Research Insights.- ISSN: 0032-3861
Global and Planetary Change
Global and Planetary Change publishes high-quality studies addressing all aspects of Earth System Science. The objective of the journal is to develop a multi-disciplinary understanding of planetary change and to improve knowledge of processes relevant at a global-scale. As such, the journal focuses equally on the geological and historical past as well as present-day and future scenarios based on observational records, experimental studies, and/or modelling. Regional or process-oriented studies are welcome provided that they are useful for understanding aspects of the Earth System.Suitable topics include, but are not limited to, studies of the dynamic Deep Earth and lithosphere to (near-)surface processes; changes in the dynamics and composition of the atmosphere, hydrosphere and cryosphere; climate change, the carbon cycle, and sea level fluctuations; global ecology, biogeography, and extinction; planetary boundaries and ecosystem resilience/threshold... and global change impacts on food security, water resources, and urban sustainability.Key criteria for the consideration of manuscripts include (a) their relevance for the global scientific community and/or (b) their wider implications for global-scale problems, preferably combined with (c) having a significance beyond a single discipline. Manuscripts may be submitted as either original research papers or as authoritative review articles. Every effort should be made to present research outcomes in a way that is understandable for a broad international readership.Please ensure your submission fulfils the following checklist of requirements to maximise the likelihood of consideration:A title and abstract that emphases its relevance to global-scale process and/or eventsA list of at least 5 potential reviewers that includes scientists from outside your network selected from across the global communityA short cover letter that concisely explains the wider global implications of your work- ISSN: 0921-8181
Additive Manufacturing
Affiliated with America Makes, the National Additive Manufacturing Innovation InstituteAdditive Manufacturing is the peer-reviewed journal that provides academia and world-leading industry with high quality research papers in additive manufacturing. The journal aims to acknowledge the innovative nature of additive manufacturing and its broad applications to outline the current and future developments in the field.Additive manufacturing technologies are positioned to provide a disruptive transformation in how products are designed and manufactured. In response, there was a need to create a unique, in-depth publication outlet for engineers, materials scientists, and practitioners in academia and virtually any industry to document innovation of these technologiesThe journal covers a wide scope, comprising new technologies, processes, methods, materials, systems, and applications in the field of additive manufacturing. Topics of particular interest include, but are not limited to:Design and Modeling • Multiple material components and devices Heterogeneous Design • Heterogeneous Design • Modeling from concept to manufacture to implementation to disposal - the entire product life cycleAdditive manufacturing processes and process enhancements • Advancements in additive manufacturing processes • Multi-technology (hybrid) systems • Enhanced closed-loop control of additive manufacturing systemsMultiple and novel materials • Characterization and performance - mechanical, electrical, chemical, biological, opticals • New material formulations and composite materials • Processing of materials in additive manufacturing and for use in additive manufacturingSpecial applications with multi-functionality • Medical additive manufacturing and bio-printing • Optimized configurations such as topology optimization • Additive manufacturing for space and in-space additive manufacturing • Improved energy utilization in and using additive manufacturing • Nano-additive manufacturing • Electromechanical and robotic systems • 3D electronics, electromagnetics, and metamaterials • Other novel applications of additive manufacturing- ISSN: 2214-8604
