Journals in Manufacturing processes and systems

IFAC-PapersOnLine

ISSN: 2405-8963

In co-operation with IFACAll papers from IFAC meetings (where IFAC is the main sponsor) are published, in partnership with Elsevier, the IFAC Publisher, in the IFAC-PapersOnLine series hosted at the ScienceDirect web service.The IFAC-PapersOnLine series has the following main features:• Diamond Open Access - free of charge both for authors and readers. • Papers are published under a Creative Commons CC-BY-NC-ND license, and can be shared in many flexible ways. • Copyright belongs to the authors, while IFAC gets exclusive publication rights.Note: The Copyright of articles submitted to IFAC before October 1, 2019, belongs to IFAC. The full text of these articles is publicly available on ScienceDirect.All papers published in IFAC-PapersOnLine have undergone a peer review selection process according to the IFAC rules.

Subscriptions

ISA Transactions

ISSN: 0019-0578

Published by the ISAISA Transactions is a journal of advances and state-of-the-art in the science and engineering of measurement and automation, of value to leading-edge industrial practitioners and applied researchers.The topics of measurement include: sensors, perception systems, analyzers, signal processing, filtering, data compression, data rectification, fault detection, inferential measurement, soft sensors, hardware interfacing, etc.; and any of the techniques that support them such as artificial intelligence, fuzzy logic, communication systems, and process analysis. The topics of automation include: statistical and deterministic strategies for discrete event and continuous process control, modelling and simulation, event triggers, scheduling and sequencing, system reliability, quality, maintenance, management, loss prevention, etc.; and any equipment, techniques and best practices that support them such as optimization, learning systems, strategy development, security, and human interfacing and training.The intended audience is research and development personnel from academe and industry in the fields of control systems, process instrumentation, systems, and automation.The journal seeks to bridge the theory and practice gap. This balance of interests requires simplicity of technique, credible demonstration, fundamental grounding, and connectivity to the state of the art in both theory and practice.If you would like more information please visit the ISA Transactions society homepagePlease see our Guide for Authors for information on article submission. If you require any further information or help, please visit our Support Center

Subscriptions

International Journal of Machine Tools and Manufacture

ISSN: 0890-6955

Design, Research & ApplicationThe International Journal of Machine Tools and Manufacture is devoted to advances in scientific understanding of essential mechanics of processes and machines applied to the manufacture of engineering components, mainly in metals, but also in composites, ceramics and other structural/functiona... materials. To this end coverage is given to a range of topics that includes:•Essential mechanics of processes involving material removal, accretion and deformation, in solid, semi-solid or particulate form •Significant scientific development of existing or new processes and machines •In-depth characterisation of workpiece materials (structure/surfaces) by advanced techniques (e.g. SEM, EDS, TEM, EBSD, AES, Raman spectroscopy) to reveal new phenomenological aspects that govern manufacturing processes •Tool design, utilisation and in-depth studies of failure mechanisms •Novel concepts of machine tools/fixtures/tool holders supported by modelling and demonstrations that are relevant to manufacturing processes within the journal's remit •Novel scientific contributions dealing with interactions between the machine tool, control system, software design and processes. •Studies of specific mechanisms governing niche processes (e.g. ultra-high precision, nano /atomic level manufacturing with either mechanical or non-mechanical "tools") •Novel approaches, supported by adequate in-depth scientific analysis, addressing emerging /breakthrough processes (e.g. bio-inspired manufacturing) and/or applications (e.g. ultra-high precision optics)The above list is not exhaustive and papers on other topics associated with process science/technology or manufacturing hardware are welcome. Significant and useful advance of the current state of knowledge is an essential factor and it is important that papers are presented in a manner that will be appreciated by both academics and practising engineers. It is unlikely that papers dealing with theory or modelling alone will be acceptable, unless a significant proven advance in scientific/technolog... knowledge is demonstrated. Likewise, papers in which the use of methodology predominates over technological advance would probably be rejected. Normally, multipart papers are not acceptable.

Subscriptions

International Journal of Production Economics

ISSN: 0925-5273

The International Journal of Production Economics focuses on topics treating the interface between engineering and management. All aspects of the subject in relation to manufacturing and process industries, as well as production in general are covered. The journal is interdisciplinary in nature, considering whole cycles of activities, such as the product life cycle - research, design, development, test, launch, disposal - and the material flow cycle - supply, production, distribution.The ultimate objective of the journal is to disseminate knowledge for improving industrial practice and to strengthen the theoretical base necessary for supporting sound decision making. It provides a forum for the exchange of ideas and the presentation of new developments in theory and application, wherever engineering and technology meet the managerial and economic environment in which industry operates. In character, the journal combines the high standards of a traditional academic approach with the practical value of industrial applications.Article... accepted need to be based on rigorous sound theory and contain an essential novel scientific contribution. Tracing economic and financial consequences in the analysis of the problem and solution reported, belongs to the central theme of the journal. Submissions should strictly follow the Guide for Authors of the journal.We are interested in publishing high quality survey and review papers in relevant domains. However, we stress that the hurdles for consideration of such papers are high. They must demonstrate a strong need, show that they are well-executed, and generate valuable insights. Survey and review papers must position themselves clearly in relation to existing related reviews and surveys in the field. Systematic reviews that merely describe publication patterns in a particular field are unlikely to be sent out for review for IJPE. All survey and review papers must show valuable critique of the field and new insights. Such papers will normally require author(s) with sufficient experience in the field to make appropriate judgements.Benefits to authors We also provide many author benefits, such as free PDFs, a liberal copyright policy, special discounts on Elsevier publications and much more. Please click here for more information on our author services.Please see our Guide for Authors for information on article submission. If you require any further information or help, please visit our Support Center

Subscriptions

Journal of Manufacturing Processes

ISSN: 1526-6125

Published by SMEManufacturing is undergoing major transformation due to the unforeseen challenges arising from the current trend of miniaturization, the emergence of new materials and the growing interaction between biologists and engineers to learn more from nature and living objects.Traditionall... a "top-down" approach has been used in manufacturing. Recently, engineers and scientists have begun exploring "bottom-up" approaches for manufacturing today's highly complex products. Further, these emerging processes are aimed to improve process efficiency and product quality.The aim of the Journal of Manufacturing Processes (JMP) is to exchange current and future directions of manufacturing processes research, development and implementation, and to publish archival scholarly literature with a view to advancing state-of-the-art manufacturing processes and encouraging innovation for developing new and efficient processes. The journal will also publish from other research communities for rapid communication of innovative new concepts. Special-topic issues on emerging technologies and invited papers will also be published.Papers relevant to the scope of JMP include, but are not limited to, the following areas:• Meso/micro/nano fabrication, including imprint lithography. • Advanced manufacturing processes, including mechanical, chemical and thermal processes. • Welding, joining and assembly at micro and macro scales. • Rapid prototyping, rapid manufacturing and repair, stereolithography and other 3-D fabrication techniques that can use optical projection. • Advanced embossing, casting, forming and molding processes at all scales. • Continuum and subcontinuum process modeling and simulation. • Manufacturing process monitoring, control and automation. • Tribology and wear issues relevant to manufacturing processes.The Journal of Manufacturing Processes (JMP) is an official journal of SME, in cooperation with the North American Manufacturing Research Institution of SME (NAMRI/SME).

Subscriptions

Journal of Manufacturing Systems

ISSN: 0278-6125

Published by SMEThe Journal of Manufacturing Systems publishes state-of-the-art fundamental and applied research in manufacturing at systems level. Manufacturing systems are comprised of products, equipment, people, information, control and support functions for the economical and competitive development, production, delivery and total lifecycle of products to satisfy market and societal needs.The aim of the Journal of Manufacturing Systems is to publish archival scholarly literature with the goal of advancing the state of the art in manufacturing systems and encouraging innovation in developing efficient, robust and sustainable manufacturing systems. Pertinent to the Journal is research that will impact emerging manufacturing systems from the equipment level to the extended enterprise. Challenges are addressed within and across various scales including nano, micro and macro-scale manufacturing, as well as within and across broad sectors including aerospace, automotive, energy and medical device manufacturing.The scope of the Journal of Manufacturing Systems includes, but is not limited to, the following areas:Factory and production network design, process planning, assembly planning, scheduling;Smart sensor networks, real-time monitoring, distributed system control;Human-machin... interaction, human-robot collaborative assembly, operator ergonomics;Multi-phy... modelling, simulation and optimisation, virtual and augmented reality in manufacturing;Diagno... and prognosis, predictive maintenance, lifecycle analysis, product-service systems;Design and operation for sustainability, energy efficiency in production and logistics;Global and regional production networks, material handling, logistics;Mass customisation and personalisation, complexity management;Cyber-phy... production systems, big data analytics and machine learning, industrial Internet;Systems issues related to additive and subtractive manufacturing, micro-electromechani... systems.Papers addressing related emerging topics are encouraged, and special-topic issues on emerging topics will be considered. The Journal of Manufacturing Systems is an official journal of Society of Manufacturing Engineers (SME), in cooperation with the North American Manufacturing Research Institution of SME (NAMRI/SME).

Subscriptions

Journal of Materials Processing Technology

ISSN: 0924-0136

Formerly: Journal of Mechanical Working TechnologyThe Journal of Materials Processing Technology covers the processing techniques used in manufacturing components from metals and other materials. The journal aims to publish full research papers of original, significant and rigorous work and so to contribute to increased production efficiency and improved component performance.Areas of interest to the journal include:Casting and formingAdditive processing and joining technologiesMaterial removal processesProcessing for surface engineeringEvolution of material properties and functionality caused by different processing conditionsDesign and behaviour of equipment and toolsThe core interest of the journal is the processing of metals, ceramics, polymers, composites and other advanced materials, where the article is focused on the influence of the process on the materials and where there are not other more appropriate dedicated journals. For example, ductile forming of polymers is of interest, but the influence of polymer composition on properties is well covered in dedicated polymer journals.A typical article will examine the influence of process design, tool design, or process operating conditions on the properties of the material or the future performance of the equipment. Most articles combine appropriate quantitative analysis with well-designed experiments. The sciences of materials, tribology and thermodynamics are well covered in other dedicated journals, so these topics are of interest to this journal only when applied specifically to give insight into the processing techniques used in manufacturing components.The journal's Editorial Policy defines our basis for considering submissions. Typical published articles will contribute significant new transferable knowledge in the form of (a) an innovation or (b) a new insight into material processing in the form of a transferable qualitative or quantitative explanation of a difference between experimental measurements and the predictions of existing theory. 'Transferable' knowledge applies to materials or processing conditions broader than those tested within the article.The Journal of Materials Processing Technology generally does not accept papers in the following areas:Simulation with no experimental verification and/or which gives no new insight into the process.Experimental reports which do not provide a convincing analytical or physical explanation of observed behaviour.Topics that properly belong to the materials science literature. Examples include the synthesis of materials, chemical experiments and studies of material composition.The analysis of material properties, surfaces or product performance without reference to the processing which caused them.Statistical methods or techniques from Artificial Intelligence which treat the process as a black box.The operation of equipment, without reference to materials (such as tool path design in CNC machining), or the management of factory systems.As stated in the journal's editorial policy, the Journal of Materials Processing Technology does not accept multiple-part papers or case studies.

Subscriptions

Manufacturing Letters

ISSN: 2213-8463

Published by SMEManufacturing Letters (MFGLET) is an online, rapid-publication journal providing a home for short, high-quality papers from the international academic and industry communities on important advances from all interdisciplinary research areas impacting manufacturing.The journal promotes an exchange of ideas and communicates significant developments of immediate interest to others engaged in formative research that contributes to progress in manufacturing techniques, models, processes, and systems.Original concise papers are encouraged describing new kinds of manufacturing based on new processes or materials, new concepts in manufacturing systems or enterprises, or novel ways to look at old problems and solutions in manufacturing that show promise. Papers merit acceptance, for example, by detailing the key elements of an emerging field of research, describing the potential of an experimental or theoretical improvement, or demonstrating a new contribution to practice or policy. Papers should not merely confirm or extend previous work.To meet a vital need to rapidly disseminate current scientific findings, Manufacturing Letters uses a streamlined review process. Papers are peer reviewed and (1) accepted as written or (2) rejected within four (4) weeks of submission. Rejected papers can be revised but must be resubmitted as new manuscripts.Papers are limited to 1500 words, not including the abstract, references, and a maximum of four (4) figures or tables. Papers must be original contributions, not simultaneously submitted elsewhere, previously published or scheduled to be published. The language of the journal is English.Emerging research communicated in Manufacturing Letters is presumed to be ongoing; therefore, authors are encouraged to submit a full-length journal paper to an appropriate publication outlet, such as the Journal of Manufacturing Systems or Journal of Manufacturing Processes .Manufacturing Letters is an official journal of SME, in cooperation with the North American Manufacturing Research Institution of SME (NAMRI/SME).

Subscriptions

Mechatronics

ISSN: 0957-4158

The Science of Intelligent Machines An International JournalMission and ScopeA journal of IFAC, the International Federation of Automatic ControlWelcome to Mechatronics: The Science of Intelligent Machines. Mechatronics is a refereed journal that publishes articles that report advances in the state-of-the-art in Mechatronics and Robotics. We welcome original submissions that report creative or innovative methodology and solutions with a synergistic combination of mechanical engineering, electrical and electronic engineering, and control systems of intelligent machines or robotic systems. Submitted manuscripts are expected to report experimental results obtained from laboratory or full-scale mechatronic apparatus. Some of the topics addressed in the published articles include:Mechatronics... Modeling, identification and control of mechatronic systems; motion and vibration control; micro/nano systems and devices; automotive systems; biomedical mechatronic systems; and advanced manufacturing equipment and processes.Robotics: Modeling, control, learning and system issues related to: autonomous vehicles and robots, marine, underwater, and aerial robots, legged robots, soft robots, field robots, industrial robots, medical robots; human-robot interaction; teleoperation; haptics; and multi-robot systems.Types of papersRegular Articles: Articles that describe original research of high quality in Mechatronics or in Robotics.Review Articles: Contain a detailed survey of established or emerging topics of interest to the journal readership.Robotics and Mechatronics Letters: Short manuscripts, no longer than seven printed journal pages, that report important time sensitive results in Robotics or in Mechatronics. These articles will go through a rapid review process overseen by a dedicated Co-Editor-in- Chief.Book Reviews: A detailed review of published textbooks or research monographs of interest to Mechatronics' readership.

Subscriptions

Robotics and Computer-Integrated Manufacturing

ISSN: 0736-5845

The emphasis of the journal Robotics and Computer-Integrated Manufacturing is on disseminating the application of research to the development of new or improved industrially-relevan... robotics, manufacturing technologies, and innovative manufacturing strategies. Preference is given to papers describing original research that includes both theory and experimental validation. Comprehensive review papers on topical issues related to robotics and manufacturing will also be considered. Papers on conventional machining processes, modelling and simulation, supply chain management, and resource optimisation, will generally be considered out of scope, as there are other more appropriate journals in these areas. Overly theoretical or mathematical papers will be directed to other more appropriate journals as well. Original papers are welcomed in the areas of industrial robotics, human-robot collaborative manufacturing, cloud-based manufacturing, cyber-physical production systems, big data analytics in manufacturing, smart mechatronics, machine learning, adaptive and sustainable manufacturing, and other fields involving unique manufacturing technologies.

Subscriptions

Life Sciences

Physical Sciences & Engineering

Social Sciences & Humanities

Health

Journals in Manufacturing processes and systems

IFAC-PapersOnLine

ISA Transactions

International Journal of Machine Tools and Manufacture

International Journal of Production Economics

Journal of Manufacturing Processes

Journal of Manufacturing Systems

Journal of Materials Processing Technology

Manufacturing Letters

Mechatronics

Robotics and Computer-Integrated Manufacturing