Journals in Computer system implementation

5 results in All results

Ad Hoc Networks

• ISSN: 1570-8705
• 5 Year impact factor: 4
• Impact factor: 4.4

The Ad Hoc Networks is an international and archival journal providing a publication vehicle for complete coverage of all topics of interest to those involved in ad hoc and sensor networking areas. The Ad Hoc Networks considers original, high quality and unpublished contributions addressing all aspects of ad hoc and sensor networks. Specific areas of interest include, but are not limited to:Mobile and Wireless Ad Hoc NetworksSensor NetworksWireless Local and Personal Area NetworksHome NetworksAd Hoc Networks of Autonomous Intelligent SystemsNovel Architectures for Ad Hoc and Sensor NetworksSelf-organizing Network Architectures and ProtocolsTransport Layer ProtocolsRouting protocols (unicast, multicast, geocast, etc.)Media Access Control TechniquesError Control SchemesPower-Aware, Low-Power and Energy-Efficient DesignsSynchronization and Scheduling IssuesMobility ManagementMobility-Tolerant Communication ProtocolsLocation Tracking and Location-based ServicesResource and Information ManagementSecurity and Fault-Tolerance IssuesHardware and Software Platforms, Systems, and TestbedsExperimental and Prototype ResultsQuality-of-Service IssuesCross-Layer InteractionsScalability IssuesPerformance Analysis and Simulation of ProtocolsBenefits to authors We also provide many author benefits, such as free PDFs, a liberal copyright policy, special discounts on Elsevier publications and much more. Please click here for more information on our author services.Please see our Guide for Authors for information on article submission. If you require any further information or help, please visit our Support Center

Subscribe

Computer Networks

• ISSN: 1389-1286
• 5 Year impact factor: 4.4
• Impact factor: 4.4

The International Journal of Computer and Telecommunications NetworkingComputer Networks is an international, archival journal providing a publication vehicle for complete coverage of all topics of interest to those involved in the computer communications networking area. The audience includes researchers, managers and operators of networks as well as designers and implementors. The Editorial Board will consider any material for publication that is of interest to those groups.SUBJECT COVERAGEThe topics covered by the journal but not limited to these are:1. Communication Network Architectures: New design contributions on Local Area Networks (LANs), Metropolitan Area Networks (MANs), Wide Area Networks (WANs) including Wired, Wireless, Mobile, Cellular, Sensor, Optical, IP, ATM, and other related network technologies, as well as new switching technologies and the integration of various networking paradigms.2. Communication Network Protocols: New design contributions on all protocol layers except the Physical Layer, considering all types of networks mentioned above and their performance evaluation; novel protocols, methods and algorithms related to, e.g., medium access control, error control, routing, resource discovery, multicasting, congestion and flow control, scheduling, multimedia quality of service, as well as protocol specification, testing and verification.3. Network Services and Applications: Web, Web caching, Web performance, Middleware and operating system support for all types of networking, electronic commerce, quality of service, new adaptive applications, and multimedia services.4. Network Security and Privacy: Security protocols, authentication, denial of service, anonymity, smartcards, intrusion detection, key management, viruses and other malicious codes, information flow, data integrity, mobile code and agent security.5. Network Operation and Management: Including network pricing, network system software, quality of service, signaling protocols, mobility management, power management and power control algorithms, network planning, network dimensioning, network reliability, network performance measurements, network modeling and analysis, and overall system management.6. Discrete Algorithms and Discrete Modeling Algorithmic and discrete aspects in the context of computer networking as well as mobile and wireless computing and communications. Fostering cooperation among practitioners and theoreticians in this field.TYPES OF CONTRIBUTIONS CONSIDEREDThe primary purpose of the journal is to publish original and complete papers covering a specific topic or project in the above mentioned areas in sufficient detail and depth to be of practical use to interested readers. The readers should benefit from the novel solutions and analyses presented in the papers. Enhanced, extended versions of quality papers presented at conferences or workshops can be submitted to our journal for review. Note that papers which were already published with the same contents or simultaneous submission of the same paper to other journals or conferences will not be considered for publication in our journal and will be immediately rejected.Dataset Articles. Computer Networks also publishes micro-articles that describe open datasets available in a redacted and organized way. The purpose is for researchers to easily share and reuse each other's datasets by publishing data articles that:(i) Describe collected data in detail, facilitating reproducibility of experiments and improvements over proposed techniques, thus promoting rigorous experimentation and data analysis. (ii) Describe tools developed to collect, analyze, and visualize data.Open-Source Software Articles. Computer Networks additionally publishes micro-articles that describe open source software that has been used to obtain scholarly results in the area of computer networks. This may include articles describing discrete-event or other simulators, emulation tools, software implementations of networking and communication functionalities and protocols, standard implementations, monitoring tools, among others.

Subscribe

Journal of Industrial Information Integration

• ISSN: 2452-414X
• 5 Year impact factor: 10.5
• Impact factor: 10.4

The Journal of Industrial Information Integration focuses on the industry's transition towards industrial integration and informatization. These topics encompass not only hardware and software, but also information integration. Industrial information integration engineering is an emerging subject. This journal aims to promote and communicate advances in industrial information integration in order to provide insights into challenges, issues, and solutions related to industrial integration and industrial informatization through an interdisciplinary forum for researchers, practitioners, and policy makers.Journal of Industrial Information Integration welcomes papers on the foundational, technical, and practical aspects of industrial information integration, while also welcoming the complex and cross-disciplinary topics of industrial information integration that arise in industrial integration. Techniques developed in mathematical science, computer science, computer engineering, electrical and electronic engineering, manufacturing engineering, and engineering management used in industrial integration and industrial informatization are integral to this journal. Occasionally the journal may publish white papers on policies, standards, and best practices regarding industrial information integration, industrial integration, industrial informatization, and industrial informatics.

Subscribe

Journal of Manufacturing Processes

• ISSN: 1526-6125
• 5 Year impact factor: 6.2
• Impact factor: 6.1

Published by SMEManufacturing is undergoing major transformation due to the unforeseen challenges arising from the current trend of miniaturization, the emergence of new materials and the growing interaction between biologists and engineers to learn more from nature and living objects.Traditionally, a "top-down" approach has been used in manufacturing. Recently, engineers and scientists have begun exploring "bottom-up" approaches for manufacturing today's highly complex products. Further, these emerging processes are aimed to improve process efficiency and product quality.The aim of the Journal of Manufacturing Processes (JMP) is to exchange current and future directions of manufacturing processes research, development and implementation, and to publish archival scholarly literature with a view to advancing state-of-the-art manufacturing processes and encouraging innovation for developing new and efficient processes. The journal will also publish from other research communities for rapid communication of innovative new concepts. Special-topic issues on emerging technologies and invited papers will also be published.Papers relevant to the scope of JMP include, but are not limited to, the following areas:• Meso/micro/nano fabrication, including imprint lithography. • Advanced manufacturing processes, including mechanical, chemical and thermal processes. • Welding, joining and assembly at micro and macro scales. • Rapid prototyping, rapid manufacturing and repair, stereolithography and other 3-D fabrication techniques that can use optical projection. • Advanced embossing, casting, forming and molding processes at all scales. • Continuum and subcontinuum process modeling and simulation. • Manufacturing process monitoring, control and automation. • Tribology and wear issues relevant to manufacturing processes.Benefits to authors We also provide many author benefits, such as free PDFs, a liberal copyright policy, special discounts on Elsevier publications and much more. Please click here for more information on our author services.Please see our Guide for Authors for information on article submission. If you require any further information or help, please visit our Support CenterThe Journal of Manufacturing Processes (JMP) is an official journal of SME, in cooperation with the North American Manufacturing Research Institution of SME (NAMRI/SME).

Subscribe

Journal of Manufacturing Systems

• ISSN: 0278-6125
• 5 Year impact factor: 11.3
• Impact factor: 12.2

Published by SMEThe Journal of Manufacturing Systems publishes state-of-the-art fundamental and applied research in manufacturing at systems level. Manufacturing systems are comprised of products, equipment, people, information, control and support functions for the economical and competitive development, production, delivery and total lifecycle of products to satisfy market and societal needs.The aim of the Journal of Manufacturing Systems is to publish archival scholarly literature with the goal of advancing the state of the art in manufacturing systems and encouraging innovation in developing efficient, robust and sustainable manufacturing systems. Pertinent to the Journal is research that will impact emerging manufacturing systems from the equipment level to the extended enterprise. Challenges are addressed within and across various scales including nano, micro and macro-scale manufacturing, as well as within and across broad sectors including aerospace, automotive, energy and medical device manufacturing.The scope of the Journal of Manufacturing Systems includes, but is not limited to, the following areas:Factory and production network design, process planning, assembly planning, scheduling;Smart sensor networks, real-time monitoring, distributed system control;Human-machine interaction, human-robot collaborative assembly, operator ergonomics;Multi-physics modelling, simulation and optimisation, virtual and augmented reality in manufacturing;Diagnosis and prognosis, predictive maintenance, lifecycle analysis, product-service systems;Design and operation for sustainability, energy efficiency in production and logistics;Global and regional production networks, material handling, logistics;Mass customisation and personalisation, complexity management;Cyber-physical production systems, big data analytics and machine learning, industrial Internet;Systems issues related to additive and subtractive manufacturing, micro-electromechanical systems.Papers addressing related emerging topics are encouraged, and special-topic issues on emerging topics will be considered. The Journal of Manufacturing Systems is an official journal of Society of Manufacturing Engineers (SME), in cooperation with the North American Manufacturing Research Institution of SME (NAMRI/SME).

Subscribe