Books in Tribology

The Tribology Handbook

2nd Edition
December 15, 1995
Michael J Neale
English
Hardback
9 7 8 0 7 5 0 6 1 1 9 8 5
eBook
9 7 8 0 0 8 0 5 1 9 6 6 1

The renowned reference work is a practical guide to the selection and design of the components of machines and to their lubrication. It has been completely revised for this second edition by leading experts in the area.

Friction Surface Phenomena

1st Edition
April 7, 1995
G.P. Shpenkov
English
eBook
9 7 8 0 0 8 0 8 7 5 9 3 4

This monograph summarises results of research in some surface phenomena, observed in mechanical treatment and friction. In particular the book is devoted to urgent problems of the science of friction and wear and provides insight into the mechanism of the phenomena that cause, on the one hand, anomalously low coefficients of friction and wear (the so-called selective transfer) and on the other, dramatic damages of the surface layers during sliding (hydrogen wear of metals). The nature of metal interaction during sliding in selective transfer and hydrogen wear modes is analysed in detail. Furthermore results of studies concerned with certain aspects of phenomena appearing in the process of influencing contacting surfaces and with detecting the relationship between the observed characteristics and behavior of investigated materials in the process of mechanical treatment and friction are presented. The principle followed is to combine varied experimental facts, physical concepts and investigation methods, which at first sight appear to be unrelated, and using this approach to determine general rules.Chapter one provides the reader with a general understanding of fundamental surface phenomena which provide the background to their dynamic interaction in mechanical treatment and under friction. Chapter two deals with the laws governing influence of mechanical effects on the surface. The third chapter presents the fundamentals of the selective transfer theory under friction. Other chapters deal with the possibilities of the Mössbauer electron spectroscopy method, widely used in physics for solving tribology problems, the influence of external electromotive force sources on contact resistance and friction pairs' wear, and hydrogen wear of metals under friction.

Dissipative Processes in Tribology

1st Edition
August 5, 1994
D. Dowson + 4 more
English
eBook
9 7 8 0 0 8 0 8 7 5 9 1 0

This book discusses dissipative phenomena, in particular the origins of friction at all scales, in mechanics, physics and chemistry, encountered in all fields of tribology, from thick film lubrication to dry friction.

Coatings Tribology

1st Edition
Volume 28
July 15, 1994
K. Holmberg + 1 more
English
eBook
9 7 8 0 0 8 0 8 7 5 9 2 7

This book presents a general view on thin surface coatings used for tribological applications and it is based on the current state of understanding. The mechanisms of friction and wear in sliding and rolling contacts of coated surfaces are described. Basic information on coating techniques, tribology and surface mechanisms is given. Based on collected experimental works information is given on the properties of thin soft coatings, such as polymer, lamellar solid and soft metal coatings; thin hard coatings, such as nitride, carbide, oxide, boride and diamond and diamond-like coatings; and multi-component and multi-layer coatings. The influence of interface layers and lubricants is highlighted. The methods available for characterization of coated surfaces and for mechanical and chemical evaluation of their tribological properties are described. Tribological evaluation methods for accelerated and field testing and the need for standardization of quality assurance procedures are discussed. A methodology for the selection of thin coatings for tribological applications is presented and knowledge based expert system approaches for coating selection are reviewed. For different application examples, the basic tribological contact mechanisms are described and the possibilities for improving their tribological properties by using surface coatings are discussed. The application examples include sliding and rolling bearings, gears, tools for cutting and forming, erosion resistant applications, magnetic recording systems and bio-medical implants.

Thin Films in Tribology

1st Edition
September 6, 1993
G. Dalmaz + 4 more
English
eBook
9 7 8 0 0 8 0 8 7 5 8 9 7

The tribological properties of relatively moving surfaces are greatly influenced by thin surface films which are of considerable importance in the design of machine components. From Victorian days when working lubricant films were calculated in tens of micrometres, to today when molecular dynamics simulations and even experiments are beginning to look at nanometre, single molecule thick films, the study of surfaces which is the tribologists' challenge has moved to finer and finer scales.The 66 papers in this volume provide reviews across the tribological field with thin films as their theme, giving a comprehensive and concise description on topics ranging from coatings and surface modification to bio-tribology. The articles provide the reader with an outline of their most effective application and potential uses in new technologies. The volume will be of interest not only to research workers and design engineers in the fields of new machine developments and lubrication, but also to engineers and students specialising in tribology.

Engineering Tribology

1st Edition
June 30, 1993
G.W. Stachowiak + 1 more
English
eBook
9 7 8 0 0 8 0 8 7 5 8 8 0

The interdisciplinary nature of tribology encompasses knowledge drawn from disciplines such as mechanical engineering, materials science, chemistry and physics. The interaction between these different fields of knowledge to achieve the final result, the control of friction and wear, is reviewed in this volume. This interdisciplinary approach has proven to be a very successful way of analysing friction and wear problems. In many cases tribology is viewed as an inaccessible subject which does not produce useful answers. In this volume the authors redress this problem by providing a comprehensive treatment of the subject. A basic feature of the book is the emphasis on describing various concepts in an accessible manner for the benefit of non-specialists. This principle is applied from the beginning of the book, where the reader is introduced to the fundamental concept of tribology. This concept is then often used to show how the various topics in tribology are interrelated to form one coherent subject. A direct graphical illustration of the mechanisms controlling tribological phenomena is presented. Carefully prepared diagrams allow rapid appreciation of the basic ideas and facts in tribology. The numerical analysis of hydrodynamic lubrication is supported by a number of computer programs which are included in the book. The control of wear is given extensive treatment with a thorough discussion of lubricant additives, solid lubricants and surface coatings. The effectiveness of coatings in suppressing specific forms of wear is analyzed together with the methods of coatings deposition. The book contains 474 figures and 44 tables. More than 1000 references are provided to give the reader access to more specialized information if required. The volume is intended to provide graduates in engineering or materials science with an understanding of the fundamental concepts of friction, wear and lubrication.

Lubricants and Special Fluids

1st Edition
December 4, 1992
V. Stepina + 1 more
English
eBook
9 7 8 0 0 8 0 8 7 5 8 7 3

The constitution, properties, production and applications of lubricants and related fluids of all states of aggregation are reviewed in this volume. Special attention is devoted to synthetic lubricants and to additives for lubricants. Standards of quality are listed, together with systems of classification and the most important specifications and methods of testing the properties of lubricants and their performance in service. Future trends in lubricants are also discussed. Non-conventional lubricants and additives are examined in detail. The relationship between constitution and properties of lubricants, e.g., the viscosity -temperature -pressure relationship, the behaviour in ageing, the biodegradability, synergisms and antagonisms in the blends of lubricants, of additives and lubricant-additive are analyzed. Guidelines for the selection of lubricants and fluids in the design, service and maintenance of machines and machine parts are also given. The work will be of interest to all those involved in the research and development of petrochemical and machinery industries, as well as lecturers and students specializing in this field.

Hydrostatic Lubrication

1st Edition
August 20, 1992
R. Bassani + 1 more
English
eBook
9 7 8 0 0 8 0 8 7 5 8 6 6

Hydrostatic lubrication is characterized by the complete separation of the conjugated surfaces of a kinematic pair, by means of a film of fluid, which is pressurized by an external piece of equipment. Its distinguishing features are lack of wear, low friction, high load capacity, a high degree of stiffness and the ability to damp vibrations.This book reviews the study of externally pressurized lubrication, both from the theoretical and the technical point of view, thereby serving the needs of both researchers as well as students and technical designers. In this connection, design suggestions for the most common types of hydrostatic bearings have been included, as well as a number of examples. A comprehensive bibliography is included with each chapter providing up to date references for more in depth coverage.

Materials for Tribology

1st Edition
May 7, 1992
William Glaeser
English
eBook
9 7 8 0 0 8 0 8 7 5 8 4 2

This handbook provides an extensive reference source on the materials used in tribological applications. Materials used in tribological applications are, for the most part, common materials used for general engineering applications. Many conventional engineering materials have been adapted to tribological uses and examples of these are given throughout the text. Literature that so far has been scattered and difficult to retrieve is now presented for the first time in this comprehensive treatise. The author has used his expertise in selecting materials for a wide variety of friction and wear applications to develop this data base on materials for tribology. In addition information has been selected from the literature on the behaviour of these materials in bearings, seals, gears, brakes, clutches, wire rope, valves, cams and wear surfaces and is included in the descriptive text. The materials have been grouped in families, relating to their composition. A short table is provided at the beginning of each chapter, listing the ranges of selected properties for the materials under discussion. In addition there are short summaries of the tribological applications this class of materials is used for. On the first page of each chapter one can find a guide for the selection of materials. Sufficient references to the literature are given to enable the reader to follow up in more detail the various topics discussed.

Rheology and Elastohydrodynamic Lubrication

1st Edition
July 24, 1991
B.O. Jacobson
English
eBook
9 7 8 0 0 8 0 8 7 5 8 3 5

This book gives a thorough overview on recent developments in lubricant rheology, elastohydrodynamic lubrication and the effects of surface roughness and particulate contamination in the lubricant on the overall behaviour of a heavily loaded lubricated contact. One of the aims of the book is to make clear to the reader that a Newtonian model for the lubricant behaviour does not have enough degrees of freedom to be able to describe the friction - traction behaviour of heavily loaded lubricated contacts or the oil film build-up and collapse under surface asperities for rough surfaces. The book contains quite a lot of experimental data of lubricants at high pressures, both solidification pressures, compressibilities and shear strength increase coefficients, which make it possible to estimate the friction and power loss in heavily loaded lubricated contacts for different pressures, temperatures, sliding speeds, and lubricant types. This is the first time that data of this type has been included in a textbook and it is hoped that the questions highlighted will serve to initiate and guide future research in this field.

Life Sciences

Physical Sciences & Engineering

Social Sciences & Humanities

Health