Books in Solid mechanics

Methods of Functional Analysis for Application in Solid Mechanics

1st Edition
Volume 9
October 22, 2013
J. Mason
English
eBook
9 7 8 1 4 8 3 2 8 9 9 1 5

Publications oriented to the interests of engineering scientists and graduate students on topics of functional analysis and its applications are rare - this book has been written to fill the gap in the literature. It provides a readable account of basic mathematic topics, with illustrative examples and chapters devoted to finite elements, variational principles of elasticity and plasticity, variational inequalities and elastic stability. The text is entirely self-contained and covers a wide range of topics and ideas, from elementary concepts to modern theories and applications, and includes numerous references. It is written for engineers, graduate students and researchers who need a general knowledge of modern mathematical methods in solid mechanics.

Mechanics of Material Interfaces

1st Edition
Volume 11
October 22, 2013
A.P.S. Selvadurai + 1 more
English
eBook
9 7 8 1 4 8 3 2 8 9 9 4 6

The category of problems which examines the mechanical behaviour of contact regions constitutes an important branch of applied mechanics with extensive engineering applications. The results of such research can be applied to the study of mechanics of composite materials, tribology, soil-foundation interaction, mechanics of rock interfaces, modelling of damage phenomena and micro-mechanics. In classical studies, the modelling of interface responses has focussed on purely idealized forms of interface phenomena which range from frictionless contact to bonded contact, with Coulomb friction or finite friction occupying an intermediate position. Current research has attempted to improve such modelling by endowing the interface with its own characteristic constitutive responses. This research indicates the significant manner in which non linear, frictional, dilatant, hardening and softening interface constitutive responses can influence the global and local interface responses of engineering interest.The technical sessions held in New Mexico (sponsored by the Elasticity Committee of the Engineering Mechanics Division of the American Society of Civil Engineers) brought together new advances in the theoretical formulation, analysis and the application of material interface modelling to problems of engineering interest. This book contains the papers presented plus invited contributions from leading researchers.

Micromechanics of Granular Materials

1st Edition
Volume 20
October 22, 2013
Massao Satake + 1 more
English
eBook
9 7 8 1 4 8 3 2 9 0 1 5 7

This proceedings volume contains papers from researchers in Japan, the United States and England who have made fundamental contributions to the micromechanics of granular materials. The purpose of the seminar was to facilitate an exchange of ideas between scientists working with statistical and continuum theories, computer simulations and experiments on both static and dynamic behaviour. In describing the solid like behaviour of granular materials, many new ideas on the constitutive relations are introduced in this volume. As an application of the analysis, the mechanism of liquefaction is discussed. Computer simulations have become a vital tool in establishing the micromechanical approaches which otherwise would not be experimentally tested. In numerical simulations and theoretical analyses of rapid granular flow, various modifications on the nature of materials and boundaries are given. Possible applications of the techniques of the stereology and analysis based on geometrical statistics are also included. The papers collected in this volume signify that the promotion of a good understanding of the mechanics of granular materials has been and will continue to be valued in a variety of technical disciplines.

Advances in the Theory of Plates and Shells

1st Edition
Volume 24
October 22, 2013
George Z. Voyiadjis + 1 more
English
eBook
9 7 8 1 4 8 3 2 9 0 9 6 6

Plates and shells play an important role in structural, mechanical, aerospace and manufacturing applications. The theory of plates and shells have advanced in the past two decades to handle more complicated problems that were previously beyond reach. In this book, the most recent advances in this area of research are documented. These include topics such as thick plate and shell analyses, finite rotations of shell structures, anisotropic thick plates, dynamic analysis, and laminated composite panels. The book is divided into two parts. In Part I, emphasis is placed on the theoretical aspects of the analysis of plates and shells, while Part II deals with modern applications. Numerous eminent researchers in the various areas of plate and shell analyses have contributed to this work which pays special attention to aspects of research such as theory, dynamic analysis, and composite plates and shells.

Advances in Micromechanics of Granular Materials

1st Edition
Volume 31
October 22, 2013
H.H. Shen + 4 more
English
eBook
9 7 8 1 4 8 3 2 9 1 2 8 4

The 45 papers presented in this volume all share the common goal of constructing continuum models based on the micro behaviours of granular materials. Computer simulations continue to provide observations to aid modelling, while new experimental works begin to show promise for increased understanding in this area. Theoretical studies have extended into transitions between the rapid and quasi-static regimes and the fluid and solid mixture flows. Exciting new topics discussed in this volume include: concepts of a measure for randomness in quasi-static granular materials, which is analogous to the granular temperature in a rapid flow; scaling effects in granular media and their implications in both physical and computer simulations; instability; and boundary effects on heterogeneous behavior in simple flow configurations, which are posing new challenges for mathematical modelling. The volume will prove indispensable reading for researchers interested in the current developments in the fundamental aspects of mechanics of granular materials.

Mechanics of Materials and Structures

1st Edition
Volume 35
October 22, 2013
George Z. Voyiadjis + 2 more
English
eBook
9 7 8 1 4 8 3 2 9 1 5 4 3

A wide range of topics in the area of mechanics of materials and structures are covered in this volume, ranging from analysis to design. There is no special emphasis on a specific area of research. The first section of the book deals with topics on the mechanics and damage of concrete. It also includes two papers on granular packing structure changes and cumulative damage in polymers. In the second part more theoretical topics in mechanics are discussed, such as shell theory and nonlinear elasticity. The following section dicusses areas dealing primarily with plasticity, viscoelasticity, and viscoplasticity. These include such topics as dynamic and cyclic plasticity. In the final section the subject is structural dynamics, including seismic analysis, composite frames and nonlinear analysis of bridges. The volume is compiled in honor of Professor Maciej P. Bieniek who has served as a teacher and researcher at several universities, and who has made many significant contributions in the evaluation, rehabilitation, and design of infrastructures.

Strength of Structural Elements

1st Edition
Volume 26
October 22, 2013
Zbigniew Brzoska
M. Zyczkowski
English
eBook
9 7 8 1 4 8 3 2 9 1 6 9 7

This volume describes engineering applications of the mechanics of deformable bodies and the elasticity theory relevant to them. It is concerned mainly with one-dimensional problems, which arise because either one of the dimensions of a body is much greater than the remaining two or the functions of two or three variables may be reduced to one variable.Problems of this type are of twofold importance. Firstly, many engineering problems can be described with sufficient accuracy just in this way. Secondly, unidimensional problems with known analytical solutions may serve either for testing numerical methods or for the analysis of fundamental concepts and phenomena, whose physical nature in three-dimensional approach might be obscured by the analytical-numerical aspect. The authors have confined themselves for the most part to the analysis of elastic behaviour of structures; however some attention is also given to elastic problems. A deterministic approach has been applied throughout the book. It will serve as a springboard for further work with stochastic approaches which are being increasingly used in engineering practice today.

Stress Analysis by Boundary Element Methods

1st Edition
Volume 23
October 22, 2013
J. Balaš + 2 more
English
eBook
9 7 8 1 4 8 3 2 9 1 7 4 1

The boundary element method is an extremely versatile and powerful tool of computational mechanics which has already become a popular alternative to the well established finite element method. This book presents a comprehensive and up-to-date treatise on the boundary element method (BEM) in its applications to various fields of continuum mechanics such as: elastostatics, elastodynamics, thermoelasticity, micropolar elasticity, elastoplasticity, viscoelasticity, theory of plates and stress analysis by hybrid methods. The fundamental solution of governing differential equations, integral representations of the displacement and temperature fields, regularized integral representations of the stress field and heat flux, boundary integral equations and boundary integro-differential equations are derived. Besides the mathematical foundations of the boundary integral method, the book deals with practical applications of this method. Most of the applications concentrate mainly on the computational problems of fracture mechanics. The method has been found to be very efficient in stress-intensity factor computations. Also included are developments made by the authors in the boundary integral formulation of thermoelasticity, micropolar elasticity, viscoelasticity, plate theory, hybrid method in elasticity and solution of crack problems. The solution of boundary-value problems of thermoelasticity and micropolar thermoelasticity is formulated for the first time as the solution of pure boundary problems. A new unified formulation of general crack problems is presented by integro-differential equations.

Theory of Plasticity and Limit Design of Plates

1st Edition
Volume 18
October 22, 2013
Z. Sobotka
English
eBook
9 7 8 1 4 8 3 2 9 1 7 9 6

An extensive review of the theory of plasticity, limit design and limit analysis of plates is contained in this volume. Detailed descriptions are given on the plastic behaviour of homogeneous, reinforced and sandwich plates, and on the rise of various yield-line patterns. The volume differs from other books on the plastic analysis of plates by its comprehensive treatment of: the theory of yield fans connected with yield-line planning; the plastic behaviour of plates under combined loadings characterized by the load factors; statical solutions; and continuous, rectangular and skew plates.Before discussing the upper-bound solutions for various types of ultimate loads acting on isotropic, orthotropic and anisotropic plates, the kinematic conditions of the plastic behaviour of plates and the principles and methods of the yield-line theory are examined in detail. Generalized yield conditions of the second degree for orthotropic and anisotropic plates are introduced. Special attention is paid to the rise of yield fans. The concept of yield line planning is also discussed, which may be of practical interest since it indicates the possibilities for preventing the rise of yield fans. Upper-bound and lower-bound solutions for the ultimate uniform load, concentrated loads, triangular and trapexoidal loads, are presented. Similar solutions are provided for continuous loads bounded by various plane and curved surfaces and for various combinations of loads acting on rectangular, polygonal, circular, elliptic and skew plates. Solutions are given for plates on hinged supports, on free supports with elevating corners, on point supports and also for plates with built-in edges. Numerical tables are provided for determining the ultimate loads, bearing moments needed for the given load systems and the parameters of yield-line patterns. The procedures detailed in the volume will prove an indispensable reference source in the practical design of roof, ceiling and bridge slabs.

Introduction to Continuum Mechanics

3rd Edition
December 2, 2012
David Rubin + 2 more
English
eBook
9 7 8 0 0 8 0 9 8 3 8 7 5

Continuum mechanics studies the response of materials to different loading conditions. The concept of tensors is introduced through the idea of linear transformation in a self-contained chapter, and the interrelation of direct notation, indicial notation and matrix operations is clearly presented. A wide range of idealized materials are considered through simple static and dynamic problems, and the book contains an abundance of illustrative examples and problems, many with solutions.Through the addition of more advanced material (solution of classical elasticity problems, constitutive equations for viscoelastic fluids, and finite deformation theory), this popular introduction to modern continuum mechanics has been fully revised to serve a dual purpose: for introductory courses in undergraduate engineering curricula, and for beginning graduate courses.

Life Sciences

Physical Sciences & Engineering

Social Sciences & Humanities

Health