Books in Engineering general

Micropower Electronics

1st Edition
October 22, 2013
Edward Keonjian
English
eBook
9 7 8 1 4 8 3 1 5 5 0 3 6

Micropower Electronics deals with the operation of modern electronic equipment at micropower levels and the problems associated with micropower electronics. Topics covered include the relations between minimum required power density and frequency response for semiconductor triode amplifiers; physical realization of digital logic circuits; micropower microelectronic subsystems; and metal-oxide-semicond... field-effect devices for micropower logic circuitry. This book is comprised of 10 chapters and begins with an analysis of fundamental relationships and basic requirements pertinent to the physical realization of minimum power in electronic devices and circuits. The following chapters focus on the implementation of the criteria of micropower electronics in one way or another for the design of specific devices and circuits. A microminiature digital integrator using micropower circuits is described, along with a multiple emitter transistor in low-power logic circuits. The static and dynamic performance of micropower transistor linear amplifiers is also discussed. This monograph will be a valuable resource for scientists and designers concerned with solid-state physics or solid circuits.

Analogue Computing Methods

1st Edition
October 22, 2013
D. Welbourne
P. Hammond
English
eBook
9 7 8 1 4 8 3 1 4 7 5 6 7

Analogue Computing Methods presents the field of analogue computation and simulation in a compact and convenient form, providing an outline of models and analogues that have been produced to solve physical problems for the engineer and how to use and program the electronic analogue computer. This book consists of six chapters. The first chapter provides an introduction to analogue computation and discusses certain mathematical techniques. The electronic equipment of an analogue computer is covered in Chapter 2, while its use to solve simple problems, including the method of scaling is elaborated in Chapter 3. Chapter 4 describes the general layout of a computer with specifications of selected commercial computers. In Chapter 5, the use of a large computer is elaborated through a reactor simulation. The last chapter outlines particular general analogue devices. Conductive analogues and other methods and special techniques, which have been used in connection with electronic analogue computing, are also deliberated in this text. This publication is valuable to students and individuals conducting work on analogue computing.

Turbine Main Engines

1st Edition
October 22, 2013
John B. Main + 2 more
A. J. S. Bennett
English
eBook
9 7 8 1 4 8 3 1 3 8 9 9 2

Turbine Main Engines deals with the principle of operation of turbine main engines. Topics covered include practical considerations that affect turbine design and efficiency; steam turbine rotors, blades, nozzles, and diaphragms; lubricating oil systems; and gas turbines for use with nuclear reactors. Gas turbines for naval boost propulsion, merchant ship propulsion, and naval main propulsion are also considered. This book is divided into three parts and begins with an overview of the basic mode of operation of the steam turbine engine and how it converts the pressure energy of the ingoing steam into equivalent kinetic energy. The second part deals with the principle of operation of marine gas turbines and discusses the effect of pressure and temperature on turbine performance; creep of turbine components; fouling of compressors and turbines; and control systems and protective devices. The final part describes free piston-gas turbine machinery and looks at different types of free piston engine, together with turbine fouling and washing procedure. This monograph will be of interest to mechanical engineers and those involved in turbine operation and design.

Electrons, Neutrons and Protons in Engineering

1st Edition
October 22, 2013
J. R. Eaton
English
eBook
9 7 8 1 4 8 3 1 4 9 4 0 0

Electrons, Neutrons and Protons in Engineering focuses on the engineering significance of electrons, neutrons, and protons. The emphasis is on engineering materials and processes whose characteristics may be explained by considering the behavior of small particles when grouped into systems such as nuclei, atoms, gases, and crystals. This volume is comprised of 25 chapters and begins with an overview of the relation between science and engineering, followed by a discussion on the microscopic and macroscopic domains of matter. The next chapter presents the basic relations involving mechanics, electricity and magnetism, light, heat, and related subjects which are most significant in the study of modern physical science. Subsequent chapters explore the nucleus and structure of an atom; the concept of binding forces and binding energy; the configuration of the system of the electrons surrounding the atomic nucleus; physical and chemical properties of atoms; and the structure of gases and solids. The energy levels of groups of particles are also considered, along with the Schrödinger equation and electrical conduction through gases and solids. The remaining chapters are devoted to nuclear fission, nuclear reactors, and radiation. This book will appeal to physicists, engineers, and mathematicians as well as students and researchers in those fields.

Mass Transfer and Absorbers

1st Edition
October 22, 2013
T. Hobler
P. V. Danckwerts
English
eBook
9 7 8 1 4 8 3 1 5 5 6 7 8

Mass Transfer and Absorbers deals with absorption and mass transfer processes and the factors to consider in designing absorbers. Calculations are supported by a uniform, generalized process driving force, complying with Maxwell's equation, and the coefficients are made as independent as possible in terms of the kind of diffusion and of the values of the concentrations. This volume is comprised of seven chapters and begins with an overview of the general principles of diffusional mass transfer, absorption and stripping, and equilibrium between gas and liquid phases. Steady-state mass transfer by diffusion is then discussed, along with mass transfer in a single phase (forced flow and unforced flow). Subsequent chapters explore design considerations for mass transfer equipment and related problems; adsorption accompanied by a chemical reaction; and problems relating to hydrodynamics. The final chapter is devoted to some practical issues, including economic flow velocity and mechanical features of packed, plate, and spray tower designs. This book is intended for practicing designers and engineers.

Fluid Dynamics Transactions

1st Edition
October 22, 2013
W. Fiszdon
English
eBook
9 7 8 1 4 8 3 1 4 9 3 0 1

Fluid Dynamics Transactions, Volume 1 is a compilation of papers presented at the Fifth Symposium on Fluid Dynamics held in Poland from August 26 to September 2, 1961. The symposium provided a forum for discussing developments in fluid dynamics based on the following topics: mathematical methods, hypersonic flow, rarefied gas dynamics, and magnetohydrodynamics... This volume is comprised of 26 chapters and begins by presenting equations for gas dynamics and highlighting some of applications of the general results. The discussion then turns to Cauchy's problem for the compressible flow of the simple wave type; the use of exact numerical methods for the solution of boundary layer problems; and the effect of surface catalytic efficiency on stagnation point heat transfer. A geometric method of classifying solutions of gas dynamics using certain space and the time-space Lie transformation groups is described. Subsequent chapters explore supersonic flow past blunt bodies; application of the Monte Carlo method to the analysis of rarefied gas flows; and fluid-fluid displacement in a porous medium. This book will be a useful resource for engineers and other scientists interested in fluid dynamics.

Digital Calculations of Engine Cycles

1st Edition
October 22, 2013
E. S. Starkman + 2 more
English
eBook
9 7 8 1 4 8 3 1 5 3 4 7 6

Digital Calculations of Engine Cycles is a collection of seven papers which were presented before technical meetings of the Society of Automotive Engineers during 1962 and 1963. The papers cover the spectrum of the subject of engine cycle events, ranging from an examination of composition and properties of the working fluid to simulation of the pressure-time events in the combustion chamber. The volume has been organized to present the material in a logical sequence. The first two chapters are concerned with the equilibrium states of the working fluid. These include the concentrations of various species of any significance that may appear at equilibrium in the combustion products, as well as the pressures and temperatures to be expected. This is followed by separate chapters on Mollier diagrams of the combustion products and the Otto cycle. The last two chapters focus on the synthesis of the spark ignition engine cycle from basic information on thermodynamics, heat transfer, and combustion. The results of the synthesis of these cycles are then compared to the actual cycle produced by an engine.

Pneumatic and Hydraulic Control Systems

1st Edition
October 22, 2013
M. A. Aizerman
English
eBook
9 7 8 1 4 8 3 1 5 5 8 9 0

Pneumatic and Hydraulic Control Systems, Volume 2, documents the proceedings of a symposium on pneumohydraulic automation. The symposium is a continuation of the first symposium of papers on pneumohydraulic automatics which was published in 1959 by the Academy of Sciences, USSR. The present collection forms part of the lectures and reports presented at the second and third All-Union Conference on pneumohydraulic automatics and embraces a wide range of problems associated with the design and application of pneumohydraulic equipment in the automation of industrial units and other objects. This volume contains 23 chapters organized into four parts. Part I contains papers on the general problems of pneumo- and hydro-automatics. Part II presents studies on pneumatic and hydraulic methods and systems of automatic regulation. Part III is devoted to pneumatic computing devices and methods of computation. The papers in Part IV cover pneumo- and hydro-automatics in the German Democratic Republic and Czechoslovakia.

Russian Social Science Reader

1st Edition
October 22, 2013
E. L. Johnson + 1 more
C. V. James
English
eBook
9 7 8 1 4 8 3 1 3 6 6 1 5

Russian Social Science Reader is one of a series designed for non-linguists who need knowledge of the Russian language in order to pursue their interests in fields other than language or literature. The purpose of this book is to provide real assistance to the trained social scientist who, having already mastered his own discipline, is willing to devote a little time to mastering the Russian language for the purpose of reading specialist material in his own field. The book begins with discussions of Russian syntax and word formation, and Russian political, economic, and legal terminologies. Separate chapters then provide extracts from the Constitution of the Russian Socialist Federative Soviet Republic and Constitution of the USSR in Russian with English translations; and extracts dealing with wide range of topics that illustrate a range of linguistic usage. Topics covered include housing and education, employment of the disabled, industrialization, collectivization of agriculture, and the Soviet economic and legal systems.

Elements of Physical Oceanography

1st Edition
October 22, 2013
Hugh J. McLellan
English
eBook
9 7 8 1 4 8 3 1 5 1 9 3 9

Elements of Physical Oceanography provides a broad look at most of the topics of concern to Physical Oceanography without treating any part of the subject matter completely or exhaustively. This book originated in a set of lecture notes for an introductory course in Physical Oceanography given by the author in the Department of Oceanography and Meteorology at Texas A&M University. The book is organized into three parts. Part I on descriptive oceanography covers topics such as nature of oceanographic data, the chemical nature of the ocean, the temperature of the ocean, and temperature-salinity relationships. Part II on oceanic movements discusses accelerations arising from mass distribution and the Earth’s rotation, geostrophic and wind driven currents, waves, and tides. Part III covers various topics such as sound propagation, the heat budget of the ocean, and estuaries. This book aims to provide the non-physical oceanographer with insight into the physical nature of the environment influencing his chosen studies. The physical oceanographer will be somewhat less than satisfied with the treatment and will wish to read the publications referred to and to follow the suggestions for additional reading.

Life Sciences

Physical Sciences & Engineering

Social Sciences & Humanities

Health