Books in Geotechnical engineering engineering geology

Reclamation, Treatment and Utilization of Coal Mining Wastes

1st Edition
December 2, 2012
A.K.M. Rainbow
English
eBook
9 7 8 0 4 4 4 5 9 7 1 4 4

Destined to become a major reference work, this book presents a wide range of specialist papers on the exploitation of coal mining wastes (minestone). Up-to-date developments and research results are reported from all over the world, providing a wealth of information for civil and mining engineers, environmentalists, and land reclamation specialists.

Mine Winding and Transport

1st Edition
December 2, 2012
S.C. Walker
English
eBook
9 7 8 0 4 4 4 5 9 7 1 7 5

Changes in size and power of available mining transport equipment, combined with improved means of control involving leaky feeder radio and computers, demands a new look at the problem of mine winding and transport. Such changes require the traditional mining engineer to have a much greater engineering application. This book is intended to satisfy that requirement.All the important means of transporting operatives and minerals are addressed, both below ground and on the surface. Safe, speedy and economic transport from the point of mineral extraction to leaving the mine is paramount. This work covers all aspects of the problem including: (1) the design and application of steel wire ropes to a variety of industrial applications, and the various drums and pulleys necessary; (2) a ready means of calculating output/throughput of various transport modes, and relating such to their power requirement; and (3) information on transport modes that enables the most suitable system for given conditions to be determined.A ``first principle'' approach has been adopted throughout, and extensive use of practical examples allows the solution of virtually all associated problems. Although formulae are used where necessary for an understanding of the content, the numerous tables included enable the practicing engineer to make short cuts to more quickly solve particular problems. In addition, the provision of a considerable number of operational constants, many not previously published, enable a more speedy and accurate solution to be effected. By comparing the calculated solutions to a particular problem, the most economic transport mode may be determined.Mining, mechanical and electrical engineers concerned with the safe movement of men or material will find this book of particular use, as will the student preparing for examinations on the subject.

Limit Analysis in Soil Mechanics

1st Edition
Volume 52
December 2, 2012
W.F. Chen + 1 more
English
eBook
9 7 8 0 4 4 4 5 9 8 3 5 6

During the last ten years, our understanding of the perfect plasticity and the associated flow rule assumption on which limit analysis is based has increased considerably. Many extensions and advances have been made in applications of limit analysis to the area of soil dynamics, in particular, to earthquake-induced slope failure and landslide problems and to earthquake-induced lateral earth pressures on rigid retaining structures. The purpose of the book therefore is in part to discuss the validity of the upper bound work (or energy) method of limit analysis in a form that can be appreciated by a practicing soil engineer, and in part to provide a compact and up-to-date summary of recent advances in the applications of limit analysis to earthquake-induced stability problems in soil mechanics.

Soil Water Repellency

1st Edition
December 2, 2012
C.J. Ritsema + 1 more
English
eBook
9 7 8 0 0 8 0 5 2 3 2 1 7

It has become clear that soil water repellency is much more wide-spread than formerly thought. Water repellency has been reported in most continents of the world for varying land uses and climatic conditions. Soil water repellency often leads to severe runoff and erosion, rapid leaching of surface-applied agrichemicals, and losses of water and nutrient availability for crops. At present, no optimum management strategies exist for water repellent soils, focusing on minimizing environmental risks while maintaining crop production. The book starts with a historical overview of water repellency research, followed by seven thematic sections covering 26 research chapters. The first section discusses the origin, the second the assessment, and the third the occurrence and hydrological implications of soil water repellency. The fourth section is devoted to the effect of fire on water repellency, section five deals with the physics and modeling of flow and transport in water repellent soils, section six presents amelioration techniques and farming strategies to combat soil water repellency, and section seven concludes the book with an extensive bibliography on soil water repellency.

Subsidence

1st Edition
Volume 56
December 2, 2012
D.J. Reddish + 1 more
English
eBook
9 7 8 0 4 4 4 5 9 8 3 4 9

Surface subsidence is recognised as a problem in most countries, particularly those with significant mining and other underground resource extraction industries. This book addresses the problems relating to subsidence whether caused naturally, or arising from mining or other forms of underground extractive activity.The main purpose of this book is to bring together subsidence knowledge, experiences and research findings in many countries and rationalise such information especially in respect of its particular field of application. Emphasis has been given to collating field data on subsidence from different countries in order to make direct comparisons. Prediction of subsidence, particularly its occurrence and general characteristics has been seen as an important area where the book can contribute significantly in terms of reviewing available knowledge, methods, scope of application and orders of accuracy achieved. The book also examines methods of controlling subsidence and discusses the response of surface structures to and protection against subsidence.

Underground Structures

1st Edition
Volume 59A
December 2, 2012
R.S. Sinha
English
eBook
9 7 8 0 4 4 4 5 9 9 0 2 5

This book presents the most up to date information relevant to the design and instrumentation of underground structures. The structure might be a tunnel, shaft, cavern, or pressure unit, or a combination thereof.Empirical, rational, numerical, convergence and confinement, and discontinuity analysis methods are treated comprehensively. Special chapters are devoted to underground structures in rock burst, swelling, squeezing, and seismic zones. Water control, instrumentation, and tunneling through soft ground are also treated extensively. Sections on the design of pressure tunnels, shafts, caverns, shotcreting, water control, and soft ground tunnels are informative and authoritative. Worked examples are included on the design of rock tunnels, soft ground tunnels, and the treatment of underground structures through difficult ground.Extensive references are provided, and figures, sketches and photographs aid presentation. Important tables on planning, and case histories, allow the reader to build confidence in his design of underground structures.The book will be beneficial to civil, structural, geotechnical and mining engineers, geologists, and planners and managers associated with the design and construction of underground structures.

Agricultural Engineering Soil Mechanics

1st Edition
Volume 10
December 2, 2012
E. McKyes
English
eBook
9 7 8 0 4 4 4 6 0 1 0 1 8

This book provides an introduction to classical soil mechanics and foundation engineering, and applies these principles to agricultural engineering situations. Theoretical design formulae are given, plus tables and graphs dealing with bearing capacity factors, wall pressure factors, soil cutting numbers and soil mechanical properties. Many example problems of design and analysis are solved in the text, and there are unsolved problems given for each chapter.The text begins with descriptions of soil origins and classification systems, including agricultural classification schemes, and then introduces classical concepts of soil strength and strength measurement techniques in the laboratory and in the field. Soil mechanics is applied to the design of shallow foundations, and the design formulae as well as tables of bearing capacity factors for design use are provided. New research and design findings in the specialized area of tall and heavy farm silos are also given, in addition to deep pile foundation design for heavy structures on very soft soils. Water flow in soils is treated, together with stability of ditch bank slopes and small earth dams, design of retaining walls and pressure pressures in bins and silos, soil erosion and protection methods, soil cutting and tillage design methods, soil compaction analysis, the use of geotextiles and problems of soil freezing.The book is directed primarily at professional university students in Agricultural Engineering, but will also be of interest to scientists working in other engineering branches, landscape architecture, soil physics and the like.

Electrotechnology in Mining

1st Edition
December 2, 2012
N. Marinovic
English
eBook
9 7 8 0 4 4 4 5 9 7 2 5 0

Both mining and electrical engineers need to bear in mind the following specific requirements of electrical applications in mining. 1) Economy of electrical plant and equipment in relation to the cost price of the extracted mineral ores, governed by the specific exploitation conditions, 2) Reliability of electrical plant and equipment for extractive operations, operational efficiency, and plant and personnel safety. 3) Special safeguards to counteract the additional hazards posed by the use of electric power, and by electrical phenomena in general. The book has been written along these lines, dealing with those topics which highlight the aspects of electrical engineering of relevance for mining engineers and aspects of mining operations that electrical engineers need, to meet the above-mentioned basic requirements governing the introduction and use of electrical plants and systems in mines.This book is intended as a text book and will be of use to students, and colleges as well as to mining and electrical engineers.

Electromagnetic Compatibility in Underground Mining

1st Edition
December 2, 2012
K. Miskiewicz + 3 more
F. Krasucki
English
eBook
9 7 8 0 4 4 4 5 9 7 8 6 1

Theoretical and technical problems of electromagnetic compatibility (EMC) in mining are covered in this volume. EMC is discussed in three main groups of problems: sources (generation) of interference, propagation of interference in mining conditions, the influence of interferences on mining devices, particularly electronic devices used in deep coal mines. Propagation of interference and its influence on mining communication and signalling systems as well as on control systems of mining machines are discussed. Attention is paid to the influences of interference on dispatching sytems which give to the dispatcher some information about mining hazards. The book will be of interest to mining and electrical engineers.

Modelling of Soil-Structure Interaction

1st Edition
Volume 58
December 2, 2012
V. Kolár + 1 more
English
eBook
9 7 8 0 4 4 4 5 9 8 9 8 1

Distributed in the East European countries, China, Northern Korea, Cuba, Vietnam and Mongolia by Academia, Prague, CzechoslovakiaThis book is based on the efficient subsoil model introduced by the authors in 1977 and applied in the last ten years in the design of foundations. From the designer's point of view, the model considerably reduces the extent of the calculations connected with the numerical analysis of soil-structure interaction. The algorithms presented are geared for use on mini- and personal computers and can be used in any numerical method. A special chapter is devoted to the implementation of the model in the NE-XX finite element program package, illustrated with diagrams, tables and practical examples.Besides presenting the energy definition and general theory of both 2D and 3D model forms, the book also deals with practical problems such as Kirchhoff's and Mindlin's foundation plates, interaction between neighbouring structures, actual values of physical constants of subsoils and natural frequencies and shapes of foundation plates.Today, researchers and engineers can choose from a wide range of soil models, some fairly simple and others very elaborate. However, the gap which has long existed between geomechanical theory and everyday design practice still persists. The present book is intended to suit the practical needs of the designer by introducing an efficient subsoil model in which the surrounding soil is substituted by certain properties of the structure-soil interface. When a more precise solution is required, a more sophisticated model form can be used. Its additional degrees of deformation freedom can better express the behaviour of layered or generally unhomogeneous subsoil. As a result, designers will find that this book goes some way towards bridging the above-mentioned gap between structural design theory and day-to-day practice.

Related subjects

Coastal hydraulic engineering

Mining geology and engineering

Rock mechanics

Soil mechanics

Life Sciences

Physical Sciences & Engineering

Social Sciences & Humanities

Health