Books in Process chemistry and technology

141-150 of 164 results in All results

European Symposium on Computer Aided Process Engineering - 10

• 1st Edition
• Volume 8
• May 10, 2000
• Sauro Pierucci
• English
• eBook 978-0-08-053130-4

  9 7 8 - 0 - 0 8 - 0 5 3 1 3 0 - 4

This book includes papers presented at ESCAPE-10, the 10th European Symposium on Computer Aided Process -Engineering, held in Florence, Italy, 7-10th May, 2000. The scientific program reflected two complementary strategic objectives of the 'Computer Aided Process Engineering' (CAPE) Working Party: one checked the status of historically consolidated topics by means of their industrial application and their emerging issues, while the other was addressed to opening new windows to the CAPE audience by inviting adjacent Working Parties to co-operate in the creation of the technical program.The former CAPE strategic objective was covered by the topics: Numerical Methods, Process Design and Synthesis, Dynamics & Control, Process Modeling, Simulation and Optimization.The latter CAPE strategic objective derived from the European Federation of Chemical Engineering (EFCE) promotion of scientific activities which autonomously and transversely work across the Working Parties' terms of references. These activities enhance the exchange of the know-how and knowledge acquired by different Working Parties in homologous fields. They also aim to discover complementary facets useful to the dissemination of tools and of novel procedures.As a consequence, the Working Parties 'Environmental Protection', 'Loss Prevention and Safety Promotion' and 'Multiphase Fluid Flow' were invited to assist in the organization of sessions in the area of: A Process Integrated Approach for: Environmental Benefit, Loss Prevention and Safety, Computational Fluid Dynamics. A total of 473 abstracts from all over the world were evaluated by the International Scientific Committee. Out of them 197 have been finally selected for the presentation and reported into this book. Their authors come from thirty different countries. The selection of the papers was carried out by twenty-eight international reviewers. These proceedings will be a major reference document to the scientific and industrial community and will contribute to the progress in Computer Aided Process Engineering.

Practical Process Research and Development

• 1st Edition
• March 20, 2000
• Neal G. Anderson
• English
• Hardback 978-0-12-059475-7

  9 7 8 - 0 - 1 2 - 0 5 9 4 7 5 - 7
• eBook 978-0-08-051448-2

  9 7 8 - 0 - 0 8 - 0 5 1 4 4 8 - 2

This book provides a comprehensive, step-by-step approach to organic process research and development in the pharmaceutical, fine chemical, and agricultural chemical industries. Process R&D describes the steps taken, following synthesis and evaluation, to bring key compounds to market in a cost-effective manner. More people are being hired for work in this area as increasing numbers of drug candidates are identified through combinatorial chemistry and high-throughput screening. The book is directed to industrial (primarily organic) chemists, and academicians (particularly those involved in a growing number of start-up companies) and students who need insight into industrial process R&D. Current books do not describe hands-on, step-by-step, approaches to solving process development problems, including route, reagent, and solvent selection; optimising catalytic reactions; chiral syntheses; and "green chemistry." "Practical Process Research and Development" will be a valuable resource for researchers, managers, and graduate students.

Hydrotreatment and Hydrocracking of Oil Fractions

• 1st Edition
• Volume 127
• November 3, 1999
• B. Delmon + 2 more
• English
• eBook 978-0-08-053426-8

  9 7 8 - 0 - 0 8 - 0 5 3 4 2 6 - 8

The 2nd International Symposium on Hydrotreatment and Hydrocracking of Oil Fractions, which is also the 7th in the series of European Workshops on Hydrotreatment, took place in Antwerpen, Belgium from November 14 to 17.The Symposium emphasized how oil refining faces increasingly severe environmental regulations. These and the increasing application of heavier crudes containing more S-, N- and metal components call for more efficient hydrotreatment and hydrocracking processes. It is clear from the keynote lectures, the oral contributions and the posters of this meeting that adapting the operating conditions will not suffice. Adequate catalysts need to be developed, with different composition and structure. Surface science techniques and molecular modeling are now well established tools for such a development. They should be of help in widely different aspects, like the role of precursors in the preparation or the modifications undergone by the catalyst under reaction conditions. The improvement of hydrotreatment and hydrocracking also needs accurate modeling of the chemical reactor. This requires more representative hydrodynamics and kinetic models whose validity extends to the very low S- and N-contents. These areas should be vigorously developed.

Supercritical Fluid Cleaning

• 1st Edition
• December 31, 1998
• Samuel P. Sawan
• English
• Hardback 978-0-8155-1416-9

  9 7 8 - 0 - 8 1 5 5 - 1 4 1 6 - 9
• eBook 978-0-8155-1916-4

  9 7 8 - 0 - 8 1 5 5 - 1 9 1 6 - 4

Although supercritial fluid (SCF) technology is now widely used in extraction and purification processes (in the petrochemical, food and pharmaceuticals industries), this book is the first to address the new application of cleaning. The objective is to provide a roadmap for readers who want to know whether SCF technology can meet their own processing and cleaning needs. It is particularly helpful to those striving to balance the requirements for a clean product and a clean environment. The interdisciplinary subject matter will appeal to scientists and engineers in all specialties ranging from materials and polymer sciences to chemistry and physics. It is also useful to those developing new processes for other applications, and references given at the end of each chapter provide links to the wider body of SCF literature. The book is organized with topics progressing from the fundamental nature of the supercritical state, through process conditions and materials interactions, to economic considerations. Practical examples are included to show how the technology has been successfully applied. The first four chapters consider principles governing SCF processing, detailing issues such as solubility, design for cleanability, and the dynamics of particle removal. The next three chapters discuss surfactants and microemulsions, SCF interaction with polymers, and the use of supercritical carbon dioxide (CO2) as a cleaning solvent. The closing chapters focus on more practical considerations such as scaleup, equipment costs, and financial analysis.

Practical Process Control

• 1st Edition
• June 26, 1998
• Anthony Seal
• English
• Hardback 978-0-340-70590-2

  9 7 8 - 0 - 3 4 0 - 7 0 5 9 0 - 2
• eBook 978-0-08-053939-3

  9 7 8 - 0 - 0 8 - 0 5 3 9 3 9 - 3

Practical Process Control introduces process control to engineers and technicians unfamiliar with control techniques, providing an understanding of how to actually apply control in a real industrial environment. It avoids analytical treatment of the numerous statistical process control techniques to concentrate on the practical problems involved. A practical approach is taken, making it relevant in virtually all manufacturing and process industries. There is currently no information readily available to practising engineers or students that discusses the real problems and such material is long overdue.

Particle Deposition and Aggregation

• 1st Edition
• June 23, 1998
• M. Elimelech + 3 more
• English
• eBook 978-0-08-051357-7

  9 7 8 - 0 - 0 8 - 0 5 1 3 5 7 - 7

Deposition and aggregation of small solid particles are encountered in many natural and industrial environments. Whether it be deposition of particles onto a surface immersed in a liquid suspension or aggregateion of individual particles, these processes are of enotmous significance. They are vital to the manufacture of magnetic tape, purification of water using packed bed filters, selective capture of solids, cells and macromolecular species, and many other applications. This book presents a unified approach to the measurement, modelling and simulation of these processes, bringing together the disciplines of colliod and surface chemistry, hydrodynamics, and experimental and computational methods. It will be required reading for graduates working in process and environmental engineering, postgraduates involved in industrial R & D and for all scientists wishing to gain a more detailed and realistic understanding of process conditions in these areas.

Adsorption Technology and Design

• 1st Edition
• February 17, 1998
• Barry Crittenden + 1 more
• English
• eBook 978-0-08-048997-1

  9 7 8 - 0 - 0 8 - 0 4 8 9 9 7 - 1

Adsorption is of considerable industrial importance and is a major part of many different processes throughout the chemical and process industries, including many reactions - chemical and bio-chemical, purification and filtration, gas and liquid processing and catalysis. Adsorption is a complex process and this makes the correct design and implementation of its operation all the more critical. The aim of this book is to provide all those involved in designing and running adsorption processes with a straightforward guide to the essentials of adsorption technology and design. It will therefore be an important addition to the bookshelves of both student and professional chemical, plant and process engineers in industries as varied as the petrochemical, pharmaceutical and food processing fields. Adsorption is of considerable industrial importance and is a major part of many different processes throughout the chemical and process industries, including many reactions - chemical and bio-chemical, purification and filtration, gas and liquid processing and catalysis. Adsorption is a complex process and this makes the correct design and implementation of its operation all the more critical. The aim of this book is to provide all those involved in designing and running adsorption processes with a straightforward guide to the essentials of adsorption technology and design. It will therefore be an important addition to the bookshelves of both student and professional chemical, plant and process engineers in industries as varied as the petrochemical, pharmaceutical and food processing fields.

Mixing in the Process Industries

• 1st Edition
• September 9, 1997
• A W NIENOW + 2 more
• English
• eBook 978-0-08-053658-3

  9 7 8 - 0 - 0 8 - 0 5 3 6 5 8 - 3

This volume is a valuable reference work for the student and the practising engineer in the chemical, pharmaceutical, minerals, food, plastics, paper and metallurgical industries. The second edition of this successful text has been thoroughly rewritten and updated. Based on the long running post-experience course produced by the University of Bradford, in association with the Institution of Chemical Engineers, it covers all aspects of mixing, from fundamentals through to design procedures in single and multi-phase systems. Experts from both industry and academia have contributed to this work giving both a theoretical practical approach. It covers dry and wet powders, single and two-phase liquids, solid/liquid and gas/liquid systems. The range of mixers available for such diverse duties is dealt with, including tumbler mixers for powders, mechanically agitated vessels, in-line continuous mixers and jet mixers. Coverage is given of the range of mixing objectives, varying from achieving product uniformity to obtaining optimum conditions for mass transfer and chemical reactions. This volume is a valuable reference work for the student and the practising engineer in the chemical, pharmaceutical, minerals, food, plastics, paper and metallurgical industries. The second edition of this successful text has been thoroughly rewritten and updated. Based on the long running post-experience course produced by the University of Bradford, in association with the Institution of Chemical Engineers, it covers all aspects of mixing, from fundamentals through to design procedures in single and multi-phase systems. Experts from both industry and academia have contributed to this work giving both a theoretical practical approach. It covers dry and wet powders, single and two-phase liquids, solid/liquid and gas/liquid systems. The range of mixers available for such diverse duties is dealt with, including tumbler mixers for powders, mechanically agitated vessels, in-line continuous mixers and jet mixers. Coverage is given of the range of mixing objectives, varying from achieving product uniformity to obtaining optimum conditions for mass transfer and chemical reactions.

Neural Systems for Control

• 1st Edition
• February 12, 1997
• Omid Omidvar + 1 more
• English
• eBook 978-0-08-053739-9

  9 7 8 - 0 - 0 8 - 0 5 3 7 3 9 - 9

Control problems offer an industrially important application and a guide to understanding control systems for those working in Neural Networks. Neural Systems for Control represents the most up-to-date developments in the rapidly growing aplication area of neural networks and focuses on research in natural and artifical neural systems directly applicable to control or making use of modern control theory. The book covers such important new developments in control systems such as intelligent sensors in semiconductor wafer manufacturing; the relation between muscles and cerebral neurons in speech recognition; online compensation of reconfigurable control for spacecraft aircraft and other systems; applications to rolling mills, robotics and process control; the usage of past output data to identify nonlinear systems by neural networks; neural approximate optimal control; model-free nonlinear control; and neural control based on a regulation of physiological investigation/blood pressure control. All researchers and students dealing with control systems will find the fascinating Neural Systems for Control of immense interest and assistance.

Hydrotreatment and Hydrocracking of Oil Fractions

• 1st Edition
• Volume 106
• January 20, 1997
• B. Delmon + 2 more
• English
• eBook 978-0-08-053435-0

  9 7 8 - 0 - 0 8 - 0 5 3 4 3 5 - 0

The symposium on Hydrotreatment and Hydrocracking of Oil Fractions aims to provide a global perspective and an inspection of the state-of-the-art of these processes. New American, European and Japanese environmental regulations call for advanced hydrotreatment processes for HDS and HDN for the removal of S- and Ni-components from oil fractions. These will alter the product slate of the oil refineries and the hydrocarbon composition of these products. Hydrocracking will play an important part in this shift.Adapting the operating conditions will not suffice to reach the desired product specifications and yields. Adequate catalysts will have to be developed. Powerful tools are now available for this, e.g. surface science techniques, molecular modeling and new types of reactors operated in a nonsteady mode.Another instrument in the improvement of hydrotreatment and hydrocracking units is the availability of more realistic kinetic models. These are based on a judicious insight into the reaction mechanism, also provided by the above-mentioned tools. Progress in the analytical techniques has allowed the reduction of the lumping of components in these kinetic models and first order kinetic equations are gradually replaced by equations accounting for the adsorption of the various components.More detailed and more realistic reactor models are now based on rigorous hydrodynamic models and their application has become possible through the rapidly increasing possibilities of computers.