Skip to main content
Elsevier

Books in Mechanical engineering design

  • Stan Shiels on centrifugal pumps: Collected articles from 'World Pumps' magazine

    • 1st Edition
    • Stan Shiels
    • English
    This collection of all of Stan Shiels’ articles for World Pumps covers specification, operational issues, troubleshooting and the well-known ‘PumpAcademy’ articles which covered specific topics of importance to pump engineers. The result is a volume which is enjoyable and instructive to read,containing facts and opinions as fresh as the day they were written.

  • Pressure Vessel Design Manual

    • 3rd Edition
    • Dennis R. Moss
    • English
    A pressure vessel is a container that holds a liquid, vapor, or gas at a different pressure other than atmospheric pressure at the same elevation. More specifically in this instance, a pressure vessel is used to 'distill'/'crack' crude material taken from the ground (petroleum, etc.) and output a finer quality product that will eventually become gas, plastics, etc. This book is an accumulation of design procedures, methods, techniques, formulations, and data for use in the design of pressure vessels, their respective parts and equipment. The book has broad applications to chemical, civil and petroleum engineers, who construct, install or operate process facilities, and would also be an invaluable tool for those who inspect the manufacturing of pressure vessels or review designs.

  • Tribological Research and Design for Engineering Systems

    Proceedings of the 29th Leeds-Lyon Symposium
    • 1st Edition
    • D. Dowson + 3 more
    • English
    These papers represent the proceedings from the 29th Leeds-Lyon Symposium on Tribology, 'Tribological Research and Design for Engineering Systems' which was held in September 2002. Over 130 delegates from 18 countries attended the symposium, and the extensive discussions generated over 150 written questions and responses, which are documented at the end of this proceedings volume.There have been many advances in the field of tribology in recent years, with progress being made in the engineering and interaction of surfaces; micro and nano-tribology; elastohydrodynamics; surface films; surface texture; tribochemistry; wear and life prediction; with both experimental and theoretical contributions. These advances were reviewed, and the impact of this understanding on the fundamentals upon total engineering activity in design, manufacture and machine operation were considered.Readershi... and researchers in the field of tribology.

  • Mechanical Engineer's Handbook

    • 1st Edition
    • Dan B. Marghitu
    • English
    The Mechanical Engineer's Handbook was developed and written specifically to fill a need for mechanical engineers and mechanical engineering students. With over 1000 pages, 550 illustrations, and 26 tables the Mechanical Engineer's Handbook is comprehensive, compact and durable. The Handbook covers major areas of mechanical engineering with succinct coverage of the definitions, formulas, examples, theory, proofs, and explanations of all principle subject areas. The Handbook is an essential, practical companion for all mechanical engineering students with core coverage of nearly all relevant courses included. Also, anyone preparing for the engineering licensing examinations will find this handbook to be an invaluable aid. Useful analytical techniques provide the student and practicing engineer with powerful tools for mechanical design. This book is designed to be a portable reference with a depth of coverage not found in "pocketbooks" of formulas and definitions and without the verbosity, high price, and excessive size of the huge encyclopedic handbooks. If an engineer needs a quick reference for a wide array of information, yet does not have a full library of textbooks or does not want to spend the extra time and effort necessary to search and carry a six pound handbook, this book is for them.

  • Mechanical Engineering Systems

    • 1st Edition
    • Richard Gentle + 2 more
    • English
    The authors of Mechanical Engineering Systems have taken a highly practical approach within this book, bringing the subject to life through a lively text supported by numerous activities and case studies. Little prior knowledge of mathematics is assumed and so key numerical and statistical techniques are introduced through unique Maths in Action features. The IIE Textbook Series from Butterworth-Heineman... Student-focused textbooks with numerous examples, activities, problems and knowledge-check questions Designed for a wide range of undergraduate courses Real-world engineering examples at the heart of each book Contextual introduction of key mathematical methods through Maths in Action features Core texts suitable for students with no previous background studying engineering "I am very proud to be able to introduce this series as the fruition of a joint publishing venture between Butterworth-Heineman... and the Institution of Incorporated Engineers. Mechanical Engineering Systems is one of the first three titles in a series of core texts designed to cover the essential modules of a broad cross-section of undergraduate programmes in engineering and technology. These books are designed with today's students firmly in mind, and real-world engineering contexts to the fore - students who are increasingly opting for the growing number of courses that provide the foundation for Incorporated Engineer registration." --Peter F Wason BSc(Eng) CEng FIEE FIIE FIMechE FIMgt. Secretary and Chief Executive,IIE This essential text is part of the IIE accredited textbook series from Newnes - textbooks to form the strong practical, business and academic foundations for the professional development of tomorrow's incorporated engineers. Forthcoming lecturer support materials and the IIE textbook series website will provide additional material for handouts and assessment, plus the latest web links to support, and update case studies in the book.

  • Fatigue Design Procedure for Welded Hollow Section Joints

    Recommendations of IIW Subcommission XV-E
    • 1st Edition
    • X-L Zhao + 1 more
    • English
    This International Institute of Welding (IIW) report was presented at the 52nd Annual Assembly in Lisbon in June 1999. It contains recommendations representing a consensus on international best practice, focusing on a 'hot spot stress' approach.A wide range of joint types is covered, the new fatigue design curve for both RHS and CHS is dealt with and detailed values for stress concentration factors are provided.The purpose of this current IIW document is to serve both as an International Standards Organisation (ISO) draft specification and as a model standard for national and regional specifications worldwide.The Recommendations (Part one) and Commentary (Part two) were edited by Dr X-L Zhao of Monash University, Australia and Professor J A Packer of the University of Toronto, Canada.

  • Materials Selection in Mechanical Design

    • 2nd Edition
    • Michael F. Ashby
    • English
    New materials enable advances in engineering design. This book describes a procedure for material selection in mechanical design, allowing the most suitable materials for a given application to be identified from the full range of materials and section shapes available. A novel approach is adopted not found anywhere else. Materials are introduced through their properties; materials selection charts (a new development) capture the important features of all materials, allowing rapid retrieval of information and application of selection techniques. Merit indices, combined with charts, allow optimisation of the materials selection process. Sources of material property data are reviewed and approaches to their use are given. Material processing and its influence on the design are discussed. The book closes with chapters on aesthetics and industrial design. Case studies are developed as a method of illustrating the procedure and as a way of developing the ideas further.This second edition is updated fully throughout with respect to materials developments and properties. There are new sections on materials selections aids, and new case studies are introduced where appropriate.

  • Net Positive Suction Head for Rotodynamic Pumps: A Reference Guide

    • 1st Edition
    • EUROPUMP
    • English
    Cavitation, the result of insufficient pressure in a pump inlet, is not only the major cause of loss in pump performance, but also of reduced cost effectiveness. This practical guide provides straight forward, up to the minute advice on all aspects of cavitation and NPSH, enabling the end user to improve all the factors involved. Prepared by Europump - European Association of Pump Manufacturers - this book contains the results of years of research work and practical experience by leading European educational institutions and pump manufacturers to give a valuable unbiased guide which is applicable to all types of rotodynamic pumps and related systems.

  • Practical Machinery Management for Process Plants: Volume 2

    Machinery Failure Analysis and Troubleshooting
    • 3rd Edition
    • Heinz P. Bloch + 1 more
    • English
    This newly expanded edition discusses proven approaches to defining causes of machinery failure as well as methods for analyzing and troubleshooting failures.

  • Rules of Thumb for Mechanical Engineers

    • 1st Edition
    • J. Edward Pope
    • English
    Save time with this collection of straightforward, common-sense techniques that provide quick, accurate solutions to your engineering problems. Rules of Thumb for Mechanical Engineers assembles hundreds of shortcuts, calculations, practical "how-to" methods, and concise background reviews into one convenient volume. Whether you're concerned with design, selection, or performance, you'll find fast, accurate answers here - all without wading through pages of theory. Experts from all engineering disciplines have packed this book's sixteen chapters with design criteria and practical tips. You'll find easy-to-read descriptions on fluids, heat transfer, thermodynamics, seals, pumps, and compressors, drivers, gears, and bearings, as well as piping and pressure vessels. Also covers tribology, vibrations, materials, stress and fatigue, instrumentation, and engineering economics.

  • Lubricants and Lubrication

    • 1st Edition
    • G. Dalmaz + 3 more
    • English
    These proceedings review progress in the development of lubricants and in the understanding of the phenomena of lubrication.The contents include papers on the impact of automotive technology and environmental factors upon lubricant requirements, elasto-hydrodynamic lubrication, boundary lubrication, machine elements, bio-tribology, metal forming, rheology, lubricated wear and very thin film (nano metre) lubrication. Presented by leading scientists from 22 different countries, these proceedings provide an up-to-date review of developments in this field.

  • Centrifugal Pumps and Allied Machinery

    • 4th Edition
    • H.H. Anderson
    • English
    This book will be of vital interest to all engineers and designers concerned with centrifugal pumps and turbines. Including statistical information derived from 20000 pumps and 700 turbines with capacities of 5gpm to 5000000gpm, this book offers the widest range and scope of information currently available. Statistical analyses suggest practical methods of increasing pump performance and provide valuable data for new design aspects.

  • Principles of Engineering Mechanics

    • 2nd Edition
    • H. Harrison + 1 more
    • English
    Students of engineering mechanics require a treatment embracing principles, practice an problem solving. Each are covered in this text in a way which students will find particularly helpful. Every chapter gives a thorough description of the basic theory, and a large selection of worked examples are explained in an understandable, tutorial style. Graded problems for solution, with answers, are also provided.Integrating statistics and dynamics within a single volume, the book will support the study of engineering mechanics throughout an undergraduate course. The theory of two- and three-dimensional dynamics of particles and rigid bodies, leading to Euler's equations, is developed. The vibration of one- and two-degree-of-freedo... systems and an introduction to automatic control, now including frequency response methods, are covered. This edition has also been extended to develop continuum mechanics, drawing together solid and fluid mechanics to illustrate the distinctions between Eulerian and Lagrangian coordinates.

  • Which Process?

    A Guide to the Selection of Welding and Related Processes
    • 1st Edition
    • P T Houldcroft
    • English
    The author presents a unique scheme for selecting processes at the drawing board stage where a need for a connection is usually first perceived. Leading the enquirer through a series of diagrams and tables, he reveals the processes which are feasible for a particular joint. The book includes descriptions of 28 joining processes in which the principal method of use, advantages and limitations, application and factors affecting costs are explained. The book is well illustrated and contains much useful advice invaluable to practising engineers and designers having no previous knowledge of joining.

  • Tribological Design of Machine Elements

    • 1st Edition
    • D. Berthe + 3 more
    • English
    On previous occasions each Symposium has focused attention on a current and significant research topic, usually reflecting the interests of the Leeds or Lyon research groups, however this time the main focus was on the vitally important subject of technology transfer, providing the 154 delegates from 21 countries with the rare opportunity to discuss the impact of their studies on machine design.