Skip to main content

Journals in Environmental technology policy and management

    • Water Research

      • ISSN: 0043-1354
      In association with the International Water Association.Water Research has an open access companion journal Water Research X, sharing the same aims and scope and rigorous peer review. Water Research publishes refereed, original research papers on all aspects of the science and technology of the anthropogenic water cycle, water quality, and its management worldwide. A broad outline of the journal's scope includes:Treatment processes for water and wastewaters (municipal, agricultural, industrial, and on-site treatment), including resource recovery and residuals management; Urban hydrology including sewer systems, stormwater management, and green infrastructure;Drink... water treatment and distribution;Potable and non-potable water reuse;Sanitation, public health, and risk assessment;Anaerobic digestion, solid and hazardous waste management, including source characterization and the effects and control of leachates and gaseous emissions;Contaminan... (chemical, microbial, anthropogenic particles such as nanoparticles or microplastics) and related water quality sensing, monitoring, fate, and assessment;Anthropog... impacts on inland, tidal, coastal and urban waters, focusing on surface and ground waters, and point and non-point sources of pollution;Environmen... restoration, linked to surface water, groundwater and groundwater remediation;Analysis of the interfaces between sediments and water, and between water and atmosphere, focusing specifically on anthropogenic impacts;Mathematical modelling, systems analysis, machine learning, and beneficial use of big data related to the anthropogenic water cycle; Socio-economic, policy, and regulations studies.Water Research is an interdisciplinary journal with an applied edge. This means that papers that go into too many details of one of the supporting disciplines (such as chemistry, toxicology, microbiology, material sciences, etc.) without making a good link with water research in general may be rejected up-front. More information on types of manuscripts that are not suitable for Water Research are discussed in an editorial available here.Audience: Biologists, chemical engineers, chemists, civil engineers, environmental engineers, limnologists, and microbiologists.Note that Water Research/Water Research X do not do pre-submission evaluations. Please carefully review the journal scope and previous issues of the journals to assess the fit of your manuscript. The handling editor will then evaluate suitability of your full manuscript.Elsevier and IWA also collaborate on another specialist title which authors are welcome to submit to: The open access Water Resources and Industry focuses on the role that industry plays in the exploitation, management and treatment of water resources.Benefits to authors We also provide many author benefits, including a liberal copyright policy, special discounts on Elsevier publications and much more. Please click here for more information on our author services.Please see our Guide for Authors for information on article submission. For author appeals, or if you require any further information or help, please visit our Support Center and chat with one of our Support Agents.
    • Energy Policy

      • ISSN: 0301-4215
      The International Journal of the Political, Economic, Planning, Environmental and Social Aspects of EnergyEnergy Policy is an international peer-reviewed journal addressing the policy implications of energy supply and use from their economic, social, planning and environmental aspects. Papers may cover global, regional, national, or even local topics that are of wider policy significance, and of interest to international agencies, governments, public and private sector entities, local communities and non-governmental organisations. Within this broad spectrum, topics of particular interest include energy and environmental regulation, energy supply security, the quality and efficiency of energy services, the effectiveness of market-based approaches and/or governmental interventions, technological innovation and diffusion, and voluntary initiatives where the broader policy implications can be recognised. Policy prescriptions are required to be supported by rigorous analysis and balanced appraisal.Given the aims and scope of Energy Policy, all submitted papers should explicitly address policy issues involving energy supply or use.This journal welcomes contributions that support and advance the UN's sustainable development goals, in particular SDG 7 (Affordable and clean energy).Special issue proposals Prospective guest editor(s) should submit written proposals that incorporate the rationale for the special issue topic, positions it in the literature, and include some illustrative topics and proposed contributors. Guest Editors should complete and submit this Special Issue Proposal template to be considered for publication in the Journal.
    • Building and Environment

      • ISSN: 0360-1323
      The International Journal of Building Science and its ApplicationsAimsBuil... and Environment is international journal that publishes original research papers, comprehensive review articles, editorials, and short communications related to building science, urban physics, and human interaction with the indoor and outdoor built environment.The Journal is focused on innovative, cutting edge technologies and knowledge, rigorously verified with measurement and analysis. The Journal publishes articles related to the environmental performance of the built environment in a wide range of spatial scales, ranging from cities, communities, buildings, to building systems and assemblies as well as other built environments such as those related to transportation and industrial settings. We encourage submission of collaborative, multi-disciplinary research results with broader significance.ScopeTo... covered in the Journal include, but are not limited to, the following themes:• Technologies, especially smart technologies and integrated systems for high performance buildings and cities:- Advanced building envelopes - Advanced building control technologies and principles - Artificial intelligence as applied to buildings or building systems - Automation in the built environment using brain-computer interfaces - Data management and digital twins for automation in the built environment - Smart space conditioning systems that are responsive to comfort - Sustainable, hybrid, and smart heating and air conditioning technologies• Thermal comfort, ventilation, acoustic and visual performance in buildings and their impacts on human beings:- Building acoustics and lighting - Building ventilation, including occupant-centered ventilation for improving microclimates - Health, productivity, and well-being related to the built environment - Human thermoregulation mechanisms and their interactions with the indoor and outdoor environments - Thermal comfort indoors, outdoors and in transition spaces - Monitoring and assessing the impact of indoor and urban pollution on people• Air quality and airborne infection control in building science and engineering- Airborne pollutants (including physical, chemical, and microbiological) formation, transport, and measurement in buildings - Self-decontaminating materials for occupant protection in health care and other high health risk-built environments - Innovative indoor air cleaning and decontamination technologies - Indoor environments in buildings and transportation vehicles - Indoor pollutant sources and control strategies for contaminant removal - Airborne infectious disease control of the built environment - Personalized technologies for prevention of indoor cross-contamination• Advanced tools for the design and decision-making communities, including tested computational, economic, educational and policy tools:- Building performance and advanced simulation tools - Modeling and simulation of building stocks at different scales - Policy studies related to buildings and the environment - Thermal analysis of buildings - Urban physics measurement and modeling• Solutions for mitigating environmental impacts and achieving low carbon, resilient, and sustainable built environments:- Building resilience (not including structures, seismic performance, flooding, fire, etc.) related to current and/or future climates - Carbon capture and sustainable systems - Circular building systems and technologies - Decarbonization technologies for building systems and communities - Global warming as related to building and urban environments - Green buildings and sustainable systems and their impacts on the urban environment - Life cycle assessment of building environmental impacts - Climate-neutral buildings and communities - Sustainable and innovative solutions and measures for mitigation of the urban heat island
    • Resources, Conservation & Recycling

      • ISSN: 0921-3449
      The journal Resources, Conservation & Recycling welcomes contributions from research, which consider sustainable management and conservation of resources. The journal emphasizes the transformation processes involved in a transition toward more sustainable production and consumption systems. Emphasis is upon technological, economic, institutional and policy aspects of specific resource management practices, such as conservation, recycling and resource substitution, and of "systems-wide" strategies, such as resource productivity improvement, the restructuring of production and consumption profiles and the transformation of industry.Contributio... may have relevance at regional, national or international scales and may focus at any level of research from individual resources or technologies to whole sectors or systems of interest. Contributors may emphasise any of the aforementioned aspects as well as scientific and methodological issues. However, manuscripts that consider only laboratory experiments, without a discussion of the practical, environmental and economic implications of the presented research, are excluded from publication in the journal.The journal publishes papers, reviews, analyses and case studies on topics, which include:Transformati... of the industrial and societal system towards more sustainable production and consumption patterns, including management, instruments, methods and processes of change.Information and management systems involving resource status, use and material flows in society.Innovation processes, tools and methods relating to resource productivity improvement.Technica... societal, economic, business and policy aspects of strategies to improve the sustainability and productivity of resource use, including strategies for managing resource supply and demand, valorizing waste, lowering energy and material intensities and increasing the serviceability of products.Substitutio... of primary resources by renewable or regenerative alternatives, including agricultural and forest resources and wastes.Material flow analysis and the understanding of resource use and flows in society and the impact on the environment, including resource extraction and waste generation.Life cycle assessment and management of resources, materials and products to improve resource efficiency and productivity, conserve resources and reduce pollution.Societal, economic and technological change for improved recovery and reuse of materials and energy from domestic, commercial or industrial waste streams.Efficient management and use of all resources, including air and water, with regard to the qualitative as well as quantitative aspects of resource use.Resources, Conservation & Recycling has a Golden Open Access companion journal Resources, Conservation & Recycling Advances which features an independent editorial board and a separate peer-review process. To submit to Resources, Conservation & Recycling Advances, please visit https://www.editoria... encourage those interested in organizing a special issue or a virtual special issue within the scope of the journal to contact Prof. Zhi Cao for more information. Additionally, we encourage potential organizers to carefully review the relevant requirements in the Guide for Authors before proceeding. Please note that each special issue can only accept up to three guest editors (GEs).
    • Process Safety and Environmental Protection

      • ISSN: 0957-5820
      Publication of the Institution of Chemical Engineers Official Journal of the European Federation of Chemical Engineering: Part BPSEP aims to be the principal international journal for publication of high quality, original papers in the branches of engineering concerned with the safety of industrial processes and the protection of the environment.Papers that deal with new developments in safety or environmental aspects, demonstrating how research results can be used in process engineering design and practice, are particularly encouraged. Experimental or theoretical research work bringing new perspectives to established principles, highlighting unsolved problems or indicating directions for future research will also be considered. The journal is especially interested in contributions that extend the boundaries of traditional engineering as well as in multidisciplinary papers.Papers related to environmental protection must take an integrated pollution control approach, demonstrating clearly that any proposed treatment method does not simply transfer pollution from one environmental medium to another, for example, from air to water or from water to solid waste. All such papers must discuss how any treatment effluents, spent adsorbents, etc., can be treated or disposed of safely, avoiding transfer of pollution to another environmental medium.For environmental protection, papers that are outside the scope are those that lack engineering aspects, including those that:use experimental techniques primarily to prepare and/or characterise various materials without considerations of process engineering design and practice;present primarily laboratory experiments of the effects of different parameters on behaviour of materials and pollutants (e.g. pH, temperature, mass of adsorbent, etc.) without further insights into the implications for engineering design and practice;focus primarily on adsorption models and curve fitting (e.g. Freundlich, Langmuir etc.); andcontain only chemical, physical and/or thermodynamic analyses.Core topic areas:Risk Assessment and Reliability Engineering • Risk assessment, risk management, consequence analysis, and uncertainty quantification. • Supply chain risk management. • Cyber and physical security vulnerability assessment. • Risk assessment of hydrogen-based technologies. • Human reliability analysis (HRA) and human-machine interface (HMI). • Reliability predictions of integrated systems and high-temperature power electronics. • Integrity management and reliability, availability and maintainability (RAM).Technical Safety and Loss Prevention • Fire and gas detection. • Firewater systems. • Functional safety and safety integrity levels (SIL) • Layer of protection analysis (LOPA) • Bowtie analysis. • Emergency response • HAZOP and other hazard/risk identification techniques.Modelling • Modelling liquid, gaseous, and two-phase releases and dispersion. • Consequence modelling, including: fire, explosion, toxic, eco-toxic effects and projectile impacts. • Methods, including computational fluid dynamics (CFD). • Accident investigation and modelling.Chemical Toxicity and Exposure Assessment • Toxic releases and exposure assessment. • Process plant health issues.Process Pipelines, Storage and Security • Process pipelines security and terrorism. • Pipeline leak detection and measurement and corrosion assessment. • Carbon capture and storage (CCS) and CO2 transport.Fire and Explosion • Fire, combustion, and explosion phenomena. • Dust explosions. • Fire and blast protection and survivability.Human Factors in Design and Management • HSE performance measurement including leading and lagging indicators. • Human and organizational factors in safety cases. • Human performance optimization by design. • SIMOPS (simultaneous operations). • Situational awareness. • Communications and risk control systems. • Resilience engineering. • Technical assurance and workforce training.Inherent Safety and Inherently Safer Design • Hazard identification • Design and development of new processes and equipment. • Methodologies for ranking inherent safety. • Retrofitting inherently safer solutions and upgrading existing plant for improved safety.Nuclear Safety • Waste disposal. • Design for decommissioning. • Passively safe reactor designs. • Nuclear reactor protective and monitoring systems.Reaction Hazards • Chemical thermal stability and thermal reaction hazards. • Influence of impurities on reaction hazards. • Development of reactivity hazard index ranking tools. • Runaway reactions, including detection and mitigation. • Compatibility/reacti... of chemicals involved in a chemical process.Industrial Hazards and Safety Cases • Major accident hazards • ALARP and cost-benefit analysis. • Industrial safety cases.Incident investigations and case histories • Case histories of incidents and lessons learned integration into design and operations. • Technical analysis of incidents. • Computational modelling to simulate actual incidents • Use of incidents in training and improvement of safety performance • Incident investigation methodologies • Incident databases and their applications.Air pollution prevention and treatment • Methods and technologies for prevention and treatment of air pollution • Air dispersion modelling • Prediction and mitigation of air pollution incidents • Health impacts from air pollutionResource and waste management • Recovery and recycling of materials and products • Energy from waste and alternative resources • Waste minimisation • Waste treatment technologies • Waste management: systems and processes for energy and material recovery and waste treatment; disposal • Landfill and waste repository design, operation and management • Land remediation and recoveryWater pollution prevention and treatment • Industrial, pure and ultrapure water production • Municipal and industrial effluent treatment • Potable water treatment • Sludge processing, energy recovery and disposal • Mitigation of water pollution incidents • Water pollution dispersion modelling • Health impacts from water pollutionFor more information on the IChemE journals published in partnership with Elsevier and to find out about some of the top research published in the journals, please see this page: https://www.elsevier...
    • Ecological Economics

      • ISSN: 0921-8009
      The Transdisciplinary Journal of the International Society for Ecological Economics (ISEE)The journal is concerned with extending and integrating the understanding of the interfaces and interplay between "nature's household" (ecosystems) and "humanity's household" (the economy). Ecological economics is an interdisciplinary field defined by a set of concrete problems or challenges related to governing economic activity in a way that promotes human well-being, sustainability, and justice. The journal thus emphasizes critical work that draws on and integrates elements of ecological science, economics, and the analysis of values, behaviors, cultural practices, institutional structures, and societal dynamics. The journal is transdisciplinary in spirit and methodologically open, drawing on the insights offered by a variety of intellectual traditions, and appealing to a diverse readership.Specific research areas covered include: valuation of natural resources, sustainable agriculture and development, ecologically integrated technology, integrated ecologic-economic modelling at scales from local to regional to global, implications of thermodynamics for economics and ecology, renewable resource management and conservation, critical assessments of the basic assumptions underlying current economic and ecological paradigms and the implications of alternative assumptions, economic and ecological consequences of genetically engineered organisms, and gene pool inventory and management, alternative principles for valuing natural wealth, integrating natural resources and environmental services into national income and wealth accounts, methods of implementing efficient environmental policies, case studies of economic-ecologic conflict or harmony, etc. New issues in this area are rapidly emerging and will find a ready forum in Ecological Economics.Ecological Economics Sections All submissions to Ecological Economics are reviewed using the general criteria of quality, creativity, originality, accuracy, and contribution to the field. There are several categories of articles to allow for a full range of constructive dialogue.News and Views Topical and timely short pieces reviewed by the editor and/or one outside reviewer at the editor's discretion. May include editorials, letters to the editor, news items, and policy discussions. Maximum 1500 words (600 words for letters).Commentary Essays discussing critical issues. Reviewed by two outside reviewers with the criteria weighted toward quality of the exposition and importance of the issue. Maximum 5000 words.Surveys Examination and review of important general subject areas. Reviewed by two outside reviewers with the criteria weighted toward importance of the subject and clarity of exposition. Maximum 8000 words.Methodological and Ideological Options Research articles devoted to developing new methodologies or investigating the implications of various ideological assumptions. Reviewed by two outside reviewers with criteria weighted toward originality and potential usefulness of the methodology or ideological option. Maximum 8000 words.Analysis Research articles devoted to analysis of important questions in the field. Reviewed by two outside reviewers with the criteria weighted toward originality, quality, and accuracy of the analysis, andimportance of the question. Maximum 8000 words.Book Reviews Reviews of recent books in the field. Reviewed by one outside reviewer with criteria weighted toward clarity and accuracy of the review, and importance of the book to the field. Maximum 1200 words.
    • Environmental Pollution

      • ISSN: 0269-7491
      Environmental Pollution is an international peer-reviewed journal that publishes high quality research papers and review articles about all aspects of pollution in the environment and its effects on ecosystems and human health. The journal welcomes high-quality process-oriented and hypothesis-driven submissions that report results from original and novel research and contribute new knowledge to help address problems related to environmental pollution at a regional or global scale.Subject areas include, but are not limited to:Sources and occurrences of pollutants that are clearly defined and measured in environmental compartments, food and food-related items, and human bodies;Interlinks between contaminant exposure and biological, ecological, and human health effects, including those of climate change;Contaminants of emerging and re-emerging concerns (including but not limited to antibiotic resistant genes, PFAS, mercury, microplastics/nanopl... light, and noise) and/or their biological, ecological, or human health effects;Modelling of pollution processes, patterns, or trends that is of clear environmental and/or human health interest;New techniques that measure and examine environmental occurrences, transport, behaviour, and effects of pollutants within the environment or the laboratory, provided that they can be clearly used to address problems within regional or global environmental compartments.Papers focusing on the following areas are likely to be returned to the authors without review: wastewater treatment technologies, materials for remediation, plant physiology, biochar, observational and similar analyses of human health;Routine surveys or monitoring programs primarily of local or regional interest; Descriptions of well-known contaminants, such as legacy pollutants, in yet another location;Studies relating to waste treatment that do not have specific relevance to pollution within the environment; Laboratory studies that do use environmentally relevant concentrations and that do not have empirical data or a thorough discussion in relation to environmental state-of-the-art knowledge;Studies of air pollution and health combining datasets susceptible to confounders i.e. case-control, cross-sectional and ecological studies;Synthesis/fa... of new materials solely for remediation and/or mitigation of pollution without direct environmental relevance;Nitrogen or phosphorus deposition or biogeochemical processes with little or no relation to environmental consequences and/or climate change;Studies on eutrophication and secondary pollution by eutrophication without illuminating their governing mechanisms and factors; Studies within which the concentrations of toxicants used are higher than those that are typically found in an environmental pollution context. Authors of toxicology studies must justify the concentrations that they are using by reference to environmentally relevant concentrations that have been reported in the literature.Bibliomet... reviews are no longer published in Environmental PollutionPlease DO NOT ask the Editors-in-Chief for permission before submitting a manuscript. Kindly check the guidelines to determine whether your manuscript is within the scope of the journal; if yes, please go ahead and submit it.
    • Waste Management

      • ISSN: 0956-053X
      International Journal of Integrated Waste Management, Science and TechnologyWaste Management is devoted to the presentation and discussion of information on solid waste generation, characterization, minimization, collection, separation, treatment, and disposal, as well as manuscripts that address waste management policy, education, and economic and environmental assessments. The journal addresses various types of solid wastes including municipal (e.g., residential, institutional, and commercial), agricultural, and special (e.g., hazardous household, hazardous and non-hazardous industrial, construction and demolition, sewage sludge, healthcare and medical) wastes. Mining, metallurgical and radioactive wastes are not in the scope of the journal.The journal welcomes both fundamental and applied research that can be related to problems of interest to solid waste researchers, practitioners and/or policy makers. Well documented case studies will be considered but they must describe results that can be applied beyond the specific location of the case study. Manuscripts that focus on the use of a waste material in a new product are often more suitable for a journal that focuses on the material properties of the product. In considering whether a manuscript is suitable for publication in Waste Management, consider whether the information is of potential use to solid waste researchers, practitioners and/or policymakers.The following are some of the major areas in which papers are solicited:Generation and characterizationMini... and reuseStorage, collection, transport, and transferTreatment (mechanical, biological, chemical, thermal, other)Landfill disposalEnvironmenta... assessments (including LCA and S-LCA)Economic analysis (including LCC)Policy and regulationsPlanningN... and emerging issues and technologiesWaste Management will not be accepting proposals for new Special Issues (SI) anymore. The new Special Issue topics and contents will be arranged and announced by the editorial team of WM. Interested authors are welcome to contribute articles.
    • Journal of Great Lakes Research

      • ISSN: 0380-1330
      Devoted to Research on Large Lakes of the World and their Watersheds The official Journal of the International Association for Great Lakes ResearchPublished six times per year, the Journal of Great Lakes Research is multidisciplinary in its coverage, publishing manuscripts on a wide range of theoretical and applied topics in the natural science fields of biology, chemistry, physics, geology, as well as social sciences of the large lakes of the world and their watersheds. Large lakes generally are considered as those lakes which have a mean surface area of >500 km2 (see Herdendorf, C.E. 1982. Large lakes of the world. J. Great Lakes Res. 8:379-412, for examples), although smaller lakes may be considered, especially if they are very deep. We also welcome contributions on saline lakes and research on estuarine waters where the results have application to large lakes.
    • ISPRS Journal of Photogrammetry and Remote Sensing

      • ISSN: 0924-2716
      Official Publication of the International Society for Photogrammetry and Remote Sensing (ISPRS)The ISPRS Journal of Photogrammetry and Remote Sensing (P&RS) is the official journal of the International Society for Photogrammetry and Remote Sensing (ISPRS). The Journal provides a channel of communication for scientists and professionals in all countries working in the many disciplines that employ photogrammetry, remote sensing, spatial information systems, computer vision, and related fields. The Journal is designed to serve as a source reference and archive of advancements in these disciplines.The P&RS objective is to publish high quality, peer-reviewed, preferably previously unpublished papers of a scientific/research, technological development or application/practica... nature. P&RS will publish papers, including those based on ISPRS meeting presentations*, which are regarded as significant contributions in the above-mentioned fields. We especially encourage papers: of broad scientific interest; on innovative applications, particularly in new fields; of an interdisciplinary nature; on topics that have not been dealt with (or to a small degree) by P&RS or related journals; and on topics related to new possible scientific/professio... directions. Preferably, theoretical papers should include applications, and papers dealing with systems and applications should include theoretical background.The scope of the journal is extensive and covers sensors, theory and algorithms, systems, experiments, developments and applications. Topics of interest include but are not limited to:SensorsAirborne, spaceborne and terrestrial imaging systems Airborne and terrestrial cameras Airborne, terrestrial and mobile laser scanning Range imaging Active and passive imaging sensor characterisation Sensor calibration and standardisation Geosensor and environmental networks Internet of ThingsMethods and proceduresSpatial data handling technologies Integrated sensor calibration and orientation Surface and object reconstruction, modelling and interpretation Geospatial data modelling, representation and structures Database systems Mapping from imagery Visualisation, virtual reality, and digital twinsPhysical measurements and spectral signatures Point cloud processing Extraction of geometric and semantic information from SAR SAR Interferometry Image classification algorithms Image segmentation and GEOBIA Image time series analysis Hyperspectral data analysis Big image data analysis Crowd sourcing Feature extractionMachine and deep learning for Earth observations data analysis and interpretationApplic... and productsUrban modeling and analysisClose-range imaging and metrology Forest and agricultural remote sensing Determination of forest metrics Medical image analysis and biometry Resource and environmental modelling Global monitoring and assessment Thematic applications DTM and orthoimage generation Location based servicesClimate resilience and sustainable development Submitted articles may be:Papers (detailed discussions involving new research, technological developments or applications); Review Papers (extensive state-of-the-art surveys of established or emerging topics or application areas) Perspective Paper (new useful ideas and brief pertinent comments of a technical nature. We are especially interested in those articles that can provide a vision for the ISPRS fields or sub-fields, suggest a new research direction, detect an emerging trend in the literature, or synthesize advances across multiple sub-fields of the Journal and beyond. Perspective articles cannot be longer than 4,000 words, with up to 5 figures/tables and 50 references); orComments and Editorials (letters to the Editor about the journal or commenting on previously published papers; editorials, mainly after an invitation by the Editorial Advisory Board). NOTE: All articles, except correspondence, will be peer-reviewed and should be of high scientific level.* Journal paper submissions based on past conference publications are only allowed if the submitted manuscript is significantly extended or otherwise enhanced. That is, the journal article will only be considered if more extensive experiments and discussion are presented (even if the same methods are used) and/or the methods have been significantly improved and/or advanced (even if the same datasets have been used). The burden of explicitly describing the differences between these publications rests with the author(s). In case of a strong overlap with another publication, the manuscript should be rejected.P&RS issues may be devoted to specific scientific topics of high or increasing importance (Theme Issues), especially in relation to one or more ISPRS Working Groups, as well as to special events, geographic regions, professional activities etc. The number and topics of Theme Issues will be such that the P&RS still remains of interest to the majority of its subscribers.For more details on the International Society for Photogrammetry and Remote Sensing, visit http://www.isprs.org...