Journals in Particle technology

Journal of Electroanalytical Chemistry

ISSN: 1572-6657
5 Year impact factor: 4
Impact factor: 4.1

JEAC (Journal of Electroanalytical Chemistry) is the foremost international journal devoted to the interdisciplinary subject of electrochemistry in all its aspects, theoretical as well as applied.Papers presenting new and interesting electrochemical science that is accessible to the reader are particularly welcomed. Authors should pay particular attention to the key issues of novelty, topicality and quality. The presentation and discussion should be at a level that is consistent with the international status of JEAC.JEAC does not accept reports describing the application of well-established techniques to problems that are essentially technical. Similarly, papers that report observations but fail to provide adequate interpretation will be rejected. Papers dealing with technical electrochemistry should be submitted to other specialist journals unless the authors can show that their work provides substantially insights into electrochemical processes.

Subscriptions

Particuology

ISSN: 1674-2001
5 Year impact factor: 3.5
Impact factor: 4.1

The word 'particuology was coined to parallel the discipline for the science and technology of particles.Particuolo... is an interdisciplinary journal that publishes frontier research articles and critical reviews on the discovery, formulation and engineering of particulate materials, processes and systems. It especially welcomes contributions utilising advanced theoretical, modelling and measurement methods to enable the discovery and creation of new particulate materials, and the manufacturing of functional particulate-based products, such as sensors.Papers are handled by Thematic Editors who oversee contributions from specific subject fields. These fields are classified into: Particle Synthesis and Modification; Particle Characterization and Measurement; Granular Systems and Bulk Solids Technology; Fluidization and Particle-Fluid Systems; Aerosols; and Applications of Particle Technology.Key topics concerning the creation and processing of particulates include:Modelling and simulation of particle formation, collective behaviour of particles and systems for particle production over a broad spectrum of length scalesMining of experimental data for particle synthesis and surface properties to facilitate the creation of new materials and processesParticle design and preparation including controlled response and sensing functionalities in formation, delivery systems and biological systems, etc.Experimental and computational methods for visualization and analysis of particulate systemThese topics are broadly relevant to the production of materials, pharmaceuticals and food, and to the conversion of energy resources to fuels and protection of the environment.With a focus on new learning related to complex multi-scale systems and phenomena, Particuology especially welcomes and now provides a platform for themes related to meso-science. This emerging field recognises that common phenomena can be observed across length scales ranging from elemental particles through to that of the observable universe. Since particulate systems are ubiquitous in various fields, this initiative extends the scope of the journal, while maintaining a focus on the common scientific challenges for these fields.

Subscriptions

Powder Technology

ISSN: 0032-5910
5 Year impact factor: 4.6
Impact factor: 4.5

An International Journal on the Science and Technology of Wet and Dry Particulate SystemsPowder Technology is an International Journal on the Science and Technology of Wet and Dry Particulate Systems. Powder Technology publishes papers on all aspects of the formation of particles and their characterisation and on the study of systems containing particulate solids. No limitation is imposed on the size of the particles, which may range from nanometre scale, as in pigments or aerosols, to that of mined or quarried materials. The following list of topics is not intended to be comprehensive, but rather to indicate typical subjects which fall within the scope of the journal's interests:Formation and synthesis of particles by precipitation and other methods.Modification of particles by agglomeration, coating, comminution and attrition.Characteri... of the size, shape, surface area, pore structure and strength of particles and agglomerates (including the origins and effects of inter particle forces).Packing, failure, flow and permeability of assemblies of particles.Particle-p... interactions and suspension rheology.Handling and processing operations such as slurry flow, fluidization, pneumatic conveying.Interactio... between particles and their environment, including delivery of particulate products to the body.Applications of particle technology in production of pharmaceuticals, chemicals, foods, pigments, structural, and functional materials and in environmental and energy related matters.For materials-oriented contributions we are looking for articles revealing the effect of particle/powder characteristics (size, morphology and composition, in that order) on material performance or functionality and, ideally, comparison to any industrial standard.Submissions will usually be overseen according to the following breakdown of specialties:L.S. Fan (The Ohio State University, USA) Fluidization, particulates and multiphase flows, particulates reaction engineering, modeling, measurements, and industrial processes and applicationsA. Teleki (Uppsala University, Sweden) Aerosols, nanoparticles, agglomeration, and functional material synthesis and applicationsC.Y. Wu (University of Surrey, UK) Particle characterization, particle mechanics, powder processing and handling, modeling and simulationA.B. Yu (Monash University, Australia) Granular dynamics and particle-fluid flow, particulate/granular systems and bulk solids handling, particle packing and structural analysis, comminution and attrition, material synthesis, process engineering and industrial applicationsJ.S. Curtis (University of California, Davis) Computational fluid dynamics and software development, modeling of particulate flow phenomena, application to granular and multiphase flows, fluid and particle mechanics, fluidization

Subscriptions

Surface Science Reports

ISSN: 0167-5729
5 Year impact factor: 9.9
Impact factor: 8.2

A Review JournalSurface Science Reports contains invited review papers on experimental and theoretical studies in the physics, chemistry and pioneering applications of surfaces, interfaces and nanostructures. It covers topics which contribute to a better understanding of basic phenomena occurring on surfaces and interfaces, but also the application of this knowledge to the development of materials, processes and devices. "Surfaces" is defined in this journal to include all interfaces between solids, liquids, polymers, biomaterials, nanostructures, soft matter, gases and/or vacuum. The journal also contains reviews of experimental techniques and methods used to characterize surfaces and surface processes, e.g. those based upon the interactions of photons, electrons and ions with surfaces.

Subscriptions

Surface and Coatings Technology

ISSN: 0257-8972
5 Year impact factor: 4.9
Impact factor: 5.3

An international journal devoted to the science and application of advanced surface treatments for improvement of material propertiesSurface and Coatings Technology is an international archival journal publishing scientific papers on significant developments in surface and interface engineering to modify and improve the surface properties of materials for protection in demanding contact conditions or aggressive environments, or for enhanced functional performance. Contributions range from original scientific articles concerned with fundamental and applied aspects of research or direct applications of metallic, inorganic, organic and composite coatings, to invited reviews of current technology in specific areas. Papers submitted to this journal are expected to be in line with the following aspects in processes, and properties/performan... Processes: Physical and chemical vapour deposition techniques, thermal and plasma spraying, surface modification by directed energy techniques such as ion, electron and laser beams, thermo-chemical treatment, wet chemical and electrochemical processes such as plating, sol-gel coating, anodization, plasma electrolytic oxidation, etc., but excluding painting.B. Properties/performan... friction performance, wear resistance (e.g., abrasion, erosion, fretting, etc), corrosion and oxidation resistance, thermal protection, diffusion resistance, hydrophilicity/hydro... and properties relevant to smart materials behaviour and enhanced multifunctional performance for environmental, energy and medical applications, but excluding device aspects.Articles must go beyond the technical recipe format and gain substantial new understanding and insight based on detailed characterization of coatings and processes. Experimental papers should provide complete information on the process parameters and an appropriate microstructural characterization. Also, papers which include test data should provide full details of the test equipment and parameters. Such papers should report on the synthesis-characteri... relationships.Manusc... must be written in good English and contain a balanced and up-to-date reference list formatted according to the guide-for-authors.No... to authors: In order to be considered for publication, the Covering Letter with your paper should clearly explain the novelty and originality of your research and its scientific contribution beyond previously published papers. If not, your submission will not be considered for publication and will not be sent out for peer-review.Benefits to authors We also provide many author benefits, such as free PDFs, a liberal copyright policy, special discounts on Elsevier publications and much more. Please click here for more information on our author services.Please see our Guide for Authors for information on article submission. If you require any further information or help, please visit our Support Center

Subscriptions

Thin Solid Films

ISSN: 0040-6090
5 Year impact factor: 1.9
Impact factor: 2

International Journal on the Science and Technology of Condensed Matter Films Thin Solid Films is an international journal which serves scientists and engineers working in the fields of thin film synthesis, characterization, modelling, and applications. The topical scope of Thin Solid Films reflects a wide range of thin film related themes: Thin film synthesis, with particular emphasis on the control of growth for desired physical propertiesSurfaces and interfacesSolar energy conversionCatalysisB... and other electrochemical devicesMetallurgical... protective, and hard coatingsElectronics, optics, and opto-electronicsMagn... and magneto-opticsSuperc... to authors Contributions to Thin Solid Films should concern thin films and their potential applications. Details of film synthesis are required, together with the reproducibility of achieved results. Simulations should always be compared with corresponding original or published experimental data.Benefits to authors We also provide many author benefits, such as free PDFs, a liberal copyright policy, special discounts on Elsevier publications and much more. Please click here for more information on our author services.Please see our Guide for Authors for information on article submission. If you require any further information or help, please visit our Support Center

Subscriptions

Related subjects

Surfaces interfaces colloids

Life Sciences

Physical Sciences & Engineering

Social Sciences & Humanities

Health

Journals in Particle technology

Journal of Electroanalytical Chemistry

Particuology

Powder Technology

Surface Science Reports

Surface and Coatings Technology

Thin Solid Films

Related subjects