Journals in Food science and technology

11-20 of 41 results in All results

Food Control

ISSN: 0956-7135
5 Year impact factor: 5.4
Impact factor: 5.6

An official scientific journal of the European Federation of Food Science and Technology (EFFoST) and the International Union of Food Science and Technology (IUFoST).Food Control is an international journal that publishes manuscripts resulting from original scientific investigation into significant food safety and food quality concerns and preventative control measures that improve public health. Manuscripts submitted to this journal should document the problem of concern, proper hypothesis, experimental design, data analysis, and interpretation of the observed results, supported by relevant statistical analysis. The research should have an international scope, not limiting to local issues.The journal focuses on postharvest human food safety and quality issues and welcomes submissions related to the areas of interest listed below: Microbial contaminants and food safety - causes and control measures, including isolation, detection, and intervention methodsChemical and biochemical contaminants (mycotoxins included) - causes and control measures, including isolation, detection, and intervention methodsFood safety preventative control measures, including process development, HACCP, food safety objectives, quality assurance, and good manufacturing practicesFood safety risk assessmentCodes of practice, legislation and international harmonizationConsumer training and educationFood Authentication and TraceabilityThe scope of Food Control is comprehensive and includes original research papers, authoritative reviews, short communications, comment articles that report on new developments in food control, and position papers.The work described should be innovative either in the approach or in the methods used. The significance of the results either for the science community or for the food industry must also be specified. Contributions that do not fulfil these requirements will not be considered for review and publication.Benefits to authors We also provide many author benefits, such as free PDFs, a liberal copyright policy, special discounts on Elsevier publications and much more. Please click here for more information on our author services.Please see our Guide for Authors for information on article submission. If you require any further information or help, please visit our Support Center.

Food Hydrocolloids

ISSN: 0268-005X
5 Year impact factor: 11.3
Impact factor: 11

Food Hydrocolloids publishes original and innovative research concerned with the characterisation, functional properties and applications of hydrocolloid materials used in food products. Hydrocolloids are defined as polysaccharides and proteins of commercial importance that are added to food products to control, for example, the texture, stability, rheology and sensory properties. The key focus of the research should be on the hydrocolloids themselves. The source and nature of the hydrocolloid materials should be fully described and details of their physicochemical characteristics provided. Manuscripts should clearly outline the specific aims and objectives of the research and must include a fundamental discussion of the research findings at the molecular level and their significance. Manuscripts that simply report data without providing a detailed interpretation of the results will not be accepted for publication in the journal. Studies on hydrocolloids in complex formulations should focus on their influence on the overall properties and their mechanism of action. Simple formulation development studies that primarily aim to optimize proportions of mixed ingredients and/or processing conditions to enhance formulated product properties will not be considered for publication.The main areas of interest are:Chemical and physicochemical characterisation of hydrocolloid materialsThe rheological properties of hydrocolloid solutions including viscosity, viscoelastic properties and gelation behaviourThe influence of hydrocolloids on food microstructure, texture and organoleptic propertiesThe interfacial properties of hydrocolloids including stabilisation of dispersions, emulsions and foamsInteractions in mixed hydrocolloid systems including phase behaviour, complexation and conjugationThe film forming properties of hydrocolloids with application in edible films, coatings and active packagingThe function and performance of hydrocolloids in 3D printing formulations for food applicationsThe encapsulation and controlled release of active compounds for inclusion in food formulationsThe modification of hydrocolloid functionality through chemical, biochemical and physical processesThe physicochemical characteristics and application of hydrocolloid materials from non-traditional sources with commercial potential in foodsHealth aspects, particularly the role of hydrocolloids as dietary fibreManuscripts that deal with the use of hydrocolloids in medical settings such as encapsulation of drugs, wound dressings and tissue engineering or research involving animal studies will not be considered for publication in Food Hydrocolloids. Such work would be more appropriate for publication in Food Hydrocolloids for Health. This is an open access companion Journal devoted to hydrocolloids applied in human health and nutrition.The Food Hydrocolloids Journal publishes Review articles that provide a focussed overview of the latest developments in emerging topics of specific interest to researchers in this field of activity.

Food Microbiology

ISSN: 0740-0020
5 Year impact factor: 5.1
Impact factor: 4.5

Food Microbiology publishes original research articles, short research communications, opinions, and review papers on all aspects of the microbiology of foods and food environments, including safety, shelf-life, diagnostics, ecology, and sensory attributes. The Journal aims to advance the microbiology of foods by discoveries, increasing knowledge, research tools, and concepts. The global audience includes academia, government, industry, and competent authorities. The journal considers articles dealing with the application, association, or prevention of viruses, bacteria, yeast, and molds related to foods or food environments through physical, biological, chemical, diagnostics, application of omics, or training/education. The application of advanced tools such as artificial intelligence, bioinformatics, and omics is encouraged. The following categories and examples that are within the scope of Food Microbiology:Food processing: Papers that report on intervention methods (physical, biological or chemical) related to inactivation and control of microbes will be considered. The articles should demonstrate optimization (validation) and verification with relevant microbes for the food matrix being reported. The use of protective cultures, microbial metabolites, and bacteriophages, amongst others, will be considered provided efficacy is demonstrated within food systems. Studies relating to natural antimicrobials (for example, bacteriocins, phenolic compounds, or essential oils) can be included, although these should be chemically characterized and novel without simply confirming previous findings. Food fermentations: The ecology, performance, and functionality of fermented foods would be within the journal's scope provided the reported study can be replicated and results applied to define, improve, or contribute to the body of knowledge. Using omics to characterize, correlate, and/or identify populations or to study community assembly in fermented foods is encouraged. Findings of omics are preferably verified and not solely based on sequencing, metabolic profiles, and correlation software. Probiotic studies will be within scope but only if these relate to the interaction of stability within a food system rather than the gastrointestinal tract or effects on the immune system. Food processing environments: The prevalence of pathogens or spoilage microbes within the processing environment can be considered if linked to a production practice or process. The control of biofilms by bacterial strains or communities is within scope if evidence of biofilm formation within a simulated commercial environment exists. Biofilms formed on surfaces not encountered within food processing environments, such as microtiter plates, will not be considered. Pre-harvest microbiology of foods: Aspects of microbiology, ecology, and control of microbes encountered in animal or plant production that impact food safety and/or shelf-life are considered. Survey and prevalence studies: The prevalence of pathogens, including antimicrobial resistance, would be considered within the journal if sampled over a reasonable time period and geographical region and linked to a practice or procedure (for example, administration of antibiotics, cage-free production, amongst others). Risk assessment and predictive microbiology: Studies reporting on risk assessment or predictive microbiology, including the application of artificial intelligence, are within the journal's scope provided they relate to the activity of microbes within a food or processing environment. Microbiology diagnostics: Diagnostics, including biosensors, for detecting microbes are within scope provided they are tested using a sufficient spectrum of strains to assess selectivity and sensitivity. Detection of targets with relevant food systems should also be demonstrated. Food safety education and training tools: Training or teaching approaches and training tools can be considered, provided the learning approaches, methodological framework, delivery methods, and success metrics are provided. Fundamental research on the physiology, genetics, and/or transcriptome of food-derived isolates: Research that reports on the mechanisms of virulence, physiology, or regulation of microbes isolated from foods but not necessarily within a food system. Out of scope The following areas are out of scope for Food Microbiology:Microbiology that resides outside the food or food processing environments. Exceptions are fundamental genetics/physiology of food isolates in relation to virulence, stress resistance or food fermentation. Observations, non-hypothesis, driven research or studies that confirm previous published works. Preliminary studies that only report observations. Research supporting health claims of pre- or probiotics. Prevalence studies or surveys that don’t report on practices, process or cause of the observations. Control of phytopathogens. Drugs or treatments administered to animals, unless there is an impact on the carriage of human pathogens through to the final product.Fermentation studies that do not verify through culturing, sequence and sensory metabolite attribution. Biosensors and microbiology methods that do not demonstrate the performance of detecting relevant microbiological targets in real food systems. Confirmation of diagnostics or those detecting chemical or physical adulterants.

Food Policy

ISSN: 0306-9192
5 Year impact factor: 6.6
Impact factor: 6.8

Food Policy is a multidisciplinary journal publishing original research and novel evidence on issues in the formulation, implementation, and evaluation of policies for the food sector in developing, transition, and advanced economies.Our main focus is on the economic and social aspect of food policy, and we prioritize empirical studies informing international food policy debates. Provided that articles make a clear and explicit contribution to food policy debates of international interest, we consider papers from any of the social sciences. Papers from other disciplines (e.g., law) will be considered only if they provide a key policy contribution, and are written in a style which is accessible to a social science readership.Policy issues that are relevant to the journal include: • Food production, trade, marketing, and consumption • Nutrition and health aspects of food systems • Food needs, entitlements, security, and aid • Food safety and quality assurance • Technological and institutional innovation affecting food systems and access • Food systems and environmental sustainabilityConceptual and methodological articles should be written so that they are accessible to the journal's diverse international readership. We normally do not publish review papers, although we might make rare exceptions for rigorous and critical reviews on topical issues.See also Elsevier's Economics Journals

Food Quality and Preference

ISSN: 0950-3293
5 Year impact factor: 5.3
Impact factor: 4.9

A journal devoted to sensory, consumer and behavioural research in food and non-food products.An official journal of the Sensometric Society and the official journal of the European Sensory Science Society Food Quality and Preference is a journal devoted to sensory, consumer and behavioural research in food and non-food products. It publishes original research, critical reviews, and short communications in sensory and consumer science, and sensometrics. In addition, the journal publishes special invited issues on important timely topics and from relevant conferences. These are aimed at bridging the gap between research and application, bringing together authors and readers in consumer and market research, sensory science, sensometrics and sensory evaluation, nutrition and food choice, as well as food research, product development and sensory quality assurance. Submissions to Food Quality and Preference are limited to papers that include some form of human measurement; papers that are limited to physical/chemical measures or the routine application of sensory, consumer or econometric analysis will not be considered unless they specifically make a novel scientific contribution in line with the journal's coverage as outlined below.The journal's coverage includes:Sensory and motivational studiesFood choice studies of cultural, sensory and environmental factorsInnovative consumer and market researchGeographical, cultural and individual differences in perception and preferencesHealth and wellbeing studiesMathematical modelling in relation to acceptability and food qualitySensometric analyses and models of sensory and acceptance parametersConsumer psychology and behavior, including the study of emotionsConsumer-driven product developmentProduct experience and contextual influencesMethodological papers on personal care and other consumer productsBenefits to authors We also provide many author benefits, such as free PDFs, a liberal copyright policy, special discounts on Elsevier publications and much more. Please click here for more information on our author services.Please see our Guide for Authors for information on article submission. If you require any further information or help, please visit our Support Center

Food Research International

ISSN: 0963-9969
5 Year impact factor: 7.4
Impact factor: 7

Food Research International provides a forum for the rapid dissemination of significant novel and high impact research in food science, technology, engineering and nutrition. The journal only publishes novel, high quality and high impact review papers, original research papers and letters to the editors, in the various disciplines encompassing the science and technology of food. It is journal policy to publish special issues on topical and emergent subjects of food research or food research-related areas. Special issues of selected, peer-reviewed papers from scientific meetings, workshops, conferences on the science, technology and engineering of foods will be also published.Food Research International is the successor to the Canadian Institute of Food Science and Technology Journal. Building on the quality and strengths of its predecessor, Food Research International has been developed to create a truly international forum for the communication of research in food science.Topics covered by the journal include: food chemistryfood microbiology and safetymicrobiomefood toxicologymaterials science of foodsfood engineeringphysical properties of foodssensory sciencefood qualityhealth and nutritionfood biophysics analysis of foodsfood nanotechnologyemerging technologiesSubjects that will not be considered for publication in Food Research International, and will be rejected as being outside of scope, include : Studies testing different formulations and ingredients leading to the choice of the best formulation or ingredient to be used in the manufacture of a specified food;Optimization studies aiming to determine processing conditions and/or raw materials that increase the yield of a production process or improve nutritional and sensorial qualities;Studies describing the production of ingredients and only their characterization without a strong mechanistic emphasis;Studies describing the biological activity of foods lacking identification of the compounds responsible for the reported activity will not be published. This is also valid for any other chemical compounds such as phytochemicals and minor components of foods. Compounds of interest need to be characterized at least by mass spectrometry-based methods.Studies that do not clearly prove the relationship between the structure of the compounds and their activity;Fingerprinting studies lacking molecular insights and validation sets;Studies on antimicrobial compounds that do not consider a validation step in foods, lacking full data on chemical composition indicating the compounds responsible for the inhibitory activity and, when appropriate, the use of molecular biology approaches to support the findings;Development of analytical methods not comprising a validation step in situ that represent the range of conditions faced during their application will not be considered;Surveys of chemical, nutritional, physical and microbiological hazards will not be considered. Only papers presenting a significant data set, wide coverage, novel and supported by adequate chemical or microbiological techniques will be considered;Pharmacology and nutritional studies papers focusing in hosts rather than in foods.Pharmacology and nutritional studies that do not contain bioavailability or biofunctionality.Engineering studies lacking of mathematical verification or validation in situ, when appropriate;Fragmented studies, of low scientific quality, or poorly written.Studies with no food component.

Food and Bioproducts Processing

ISSN: 0960-3085
5 Year impact factor: 4.2
Impact factor: 3.5

FBP aims to be the principal international journal for publication of high quality, original papers in the branches of engineering and sciencededicated to the safe processing of biological products. It is the only journal to exploit the synergy between biotechnology, bioprocessing and food engineering. Papers showing how research results can be used in engineering design, and accounts of experimental or theoretical research work bringing new perspectives to established principles, highlighting unsolved problems or indicating directions for future research, are particularly welcome. Contributions that deal with new developments in equipment or processes and that can be given quantitative expression are encouraged, including modelling and digitalisation studies. The Editorial Board is especially interested in papers that extend the boundaries of food and bioproducts processing using engineering principles.The journal publishes regular special issues focusing on specific topics. The core topic areas covered are:Biotechnology and Bioprocessing • Biocatalysis and biotransformations • Biocompatible materials and scaffolds • Bioprocess modelling and optimization • Bioreactor design and control • Bioseparation • Fermentation and bioreactor design • Microbial physiology and metabolic engineering • Product formulation • Scale-up and preservation technologyBiorefining and Integrated Bioresource Engineering • Process integration of biorefineries • Feedstock fractionation and separation in relation to biorefinery integration • Biorefineries and the Food-Energy-Water nexus • Biorefinery value chain optimisation • Integration of biorefinery concepts with food processing • New functional food ingredients and non-food materials made feasible through the biorefinery context • Biorefinery sustainability metrics • Dynamic modelling and analysis of biorefinery systemsFood and Drink Process Engineering • Engineering for food safety • Environmental issues in food manufacture • Minimal processing techniques • Packaging • Plant, process and product design • Processing and microstructure interactions • Unit operations, process modelling and optimization in food engineeringHygienic Manufacture and Product Safety • Fouling and cleaning • Good manufacturing practice • Hazard analysis • Heating and cooling methods, including freezing, pasteurization and thermal sterilization • Hygienic design • Non-thermal processes • Process Analytical Technology (PAT) • Regulation and validationPapers should be written in precise and concise English. Guidance on writing is available in the following open access articles:https://www.sciencedirect.com/science/article/pii/S0008622307003545 https://www.sciencedirect.com/science/article/pii/S0008622308000122 https://www.sciencedirect.com/science/article/pii/S0008622308001723 https://www.sciencedirect.com/science/article/pii/S0008622310002927 https://www.sciencedirect.com/science/article/pii/S0008622311005525The Introduction should identify, clearly, the new science or novel contribution to knowledge in the work, and how it differs from previous studies in the field. FBP has a strong engineering focus and the Discussion should indicate how the findings can be applied to other, related but different systems. Papers that are not likely to be published are those:• That use experimental design techniques to obtain response surfaces but gain little insight from them, and do not compare results to established mechanistic models; • Demonstrating the application of existing methods to particular materials without providing new insights or quantitative models that would allow the findings to be applied to other materials without extensive experimentation; • That are empirical and ignore established mechanistic models, e.g., empirical drying curves; • Concerning the extraction, encapsulation and/or antioxidant activity of a specific food or biological material without providing insight that could be applied to a similar but different material; • Containing only chemical analyses of biological materials or foodstuffs; • Primarily concerned with food formulation; • That are primarily concerned about sensory evaluation and colour

Harmful Algae

ISSN: 1568-9883
5 Year impact factor: 5.6
Impact factor: 5.5

This journal provides a forum to promote knowledge of harmful microalgae and macroalgae, including cyanobacteria, as well as monitoring, management and control of these organisms. Both original research and review papers will be considered.Papers dealing with the following aspects of harmful microalgae and cyanobacteria in marine and fresh waters will be considered: • The distribution, life histories and taxonomy of harmful microalgae; • The physiology and toxicology of harmful microalgae; • Harmful microalgal bloom ecology; • Trophic, socio-economic, public health and aquacultural impacts of harmful microalgal bloom events; • Occurrence, methods of detection and chemical structure of toxins in harmful microalgae, cyanobacteria, foodwebs and seafood; • Factors controlling toxin production, biosynthesis and chemical ecology.Note: Papers dealing with pharmacology fall outside of the scope of the journal.All papers will be subject to peer review. Authors will receive proofs. The editors, referees, and publisher will make every effort to expedite publication, the co-operation of authors in this task is welcomed.Cover picture by Joe Hlebica, Scripps Institution of Oceanography, Multi-Media Group

Industrial Crops and Products

ISSN: 0926-6690
5 Year impact factor: 5.7
Impact factor: 5.6

Industrial Crops and Products is an international journal publishing research on cultivated plants (crops) of industrial interest (non-food, non-feed). Papers concern both crop-oriented and bio-based materials research. It should be of interest to an international audience, hypothesis driven, and repeatable. Crops and products of interest include: fiber, forest, and energy crops, industrial oilseeds, rubber and resins, and cultivated medicinal and aromatic plants. The plant(s) in the manuscript must fit our definition of industrial crops, before it is classified further in research topics as indicated below. Research on food, phytochemistry, ethnobotany, and medicine are not in the scope of the journal. Authors should make clear in the cover letter how the research fits our scope following the detailed scope description below.The following are examples of research that fits within the scope of the journal:Industrial crop management practices to increase productivity and specific chemical components. Including cultural practices (sowing, plant density, fertilization, pruning, shading, management of wild stands for sustainable harvest, pests and weed management, harvest, post-harvest, etc.).Breeding and genetics of cultivated industrial crops. The research must be of international interest and hypothesis driven. The research must be of value to other breeders and the germplasm developed must be available to other researchers for further genetic improvement.Response of cultivated industrial crops to abiotic (temperature, water, salinity, pH, heavy metals, etc.) and biotic stresses (insects, diseases, weeds).Sustainable cropping systems including an industrial crop to reduce negative environmental impacts of conventional cropping systems. For example, cultivation in marginal lands, intercropping, double or relay cropping, cover cropping or other systems intended to minimize soil erosion, eutrophication, greenhouse gases emissions, loss of biodiversity, etc.New techniques for the propagation of industrial crops or production of metabolites in vitro (root and tissue culture, micropropagation).Discovery or development of new industrial crops is in the scope, but must include an evaluation of the real potential to make a plant an industrial crop, not just information on plants gathered in natural habitats (many plants make products, but they will not become a crop). An economic analysis may be included as appropriate.Extraction methods of metabolites from industrial crops and waste streams of industrial crops processing (non-food related).Biochemical and thermochemical conversion of lignocellulosic biomass.Bio-based materials:Fiber and fiber compounds: cellulose-, hemicelluloses-and lignin-based products, textiles, nanofibers, composites, films, etc.Other crop-polysaccharides based materials such as carbohydrates and proteins-based products not intended for the food industry (adhesives, varnishes, paints, etc.)Rubber, waxes, resins, gums from cropsPolymers from cropsCrop and forestry biorefinery:Energy crops: fuel (bioethanol, biogas, syngas), biochar, chemicals, etc.Oils, fatty acids, biofuels (biodiesel, jet fuel, drop-in fuels), and chemicals derived from oilseed cropsBiologically active compounds:Insecticides, herbicides, fungicides, and pharmaceuticals (the species has to fit our definition of industrial crop; cultivated plants or plants with demonstrated potential to be cultivated with non-food purposes)Essential oils: inks, dyes, lubricants, perfumes, cosmetics, plastics, and other industrial applicationsBio-based products must be tied to specific crops/plants, and their modification to meet new industrial uses. For instance, for nanoparticles, a direct link is required with an industrial crop or with the respective value-chain.In the manuscript, all species must include the Latin name and Authority, the first time the species is mentioned in the abstract or text.Research not in the scope of the journal:Field or horticultural crops and products which main use is food, functional food, or nutraceutical. Some crops might have both an industrial and food use. For example rapeseed (Brassica napus L.), if the work is directed to industrial rapeseed (biodiesel, jet fuel) fits the scope; but if it is a canola type with main use as food; then is not in the scope, same for other oilseeds (sunflower, safflower), sugar crops( sugarcane, sugarbeet), and others.Non-plant research or non-plant derived products, for instance animal, algae, fungi, microorganisms, and minerals. For example: honey, propolis, chitosan, graphene, etc. are not in the scope.Genetic, phytochemical, molecular characterization or screening of plant species collected in their natural habitat or a local set of genotypes of a species with or without potential to become a cultivated industrial crop.In vitro antioxidant activity characterization with indirect methods (DPPH, ABTS, FRAP or ORAC) of plants or plant parts without proof of biological activity. Antioxidant activity is present in all plants and thus is meaningless without additional data.Edible films and food/feed related antioxidant activity.Ethnobotany, ethnopharmacology, pharmacology, and phytochemistry.Development of analytical methods of metabolites.Valorization and metabolite extraction of waste streams from food industry (peels, seeds, pomace, coffee grounds, vegetables processing, etc.).

Innovative Food Science and Emerging Technologies

ISSN: 1466-8564
5 Year impact factor: 6.5
Impact factor: 6.3

An official scientific journal of the European Federation of Food Science and Technology (EFFoST)Innovative Food Science and Emerging Technologies (IFSET) aims to provide the highest quality original contributions on new developments in food science innovations and emerging technologies. The work described should be innovative in the approach and/or in the methods used. The significance of the information for the food science and food R & D community must be specified. Only papers which advance current scientific knowledge and understanding or with high technical relevance will be considered.IFSET does not publish preliminary or confirmatory results. The journal publishes research and invited review papers dealing with key advances in food science, food engineering and technology, safety, security and sustainability, fundamental, kinetics and mechanistic aspects of promising emerging food processing technologies as well as key food science innovations.Each article should make clear contribution to further understanding of a given food science and technology area. Articles may address combinations of more than one technology as well as interdisciplinary research including mechanical, chemical or material engineering, food-biotechnology, nutrition, material science or issues of global challenges.Topics of interest include: Innovations for foods and food constituents Process-structure-function relationships at macro, micro or nanoscale Tailor-made foods Food process structure properties as well as process-packaging-food interactions Resource-efficient, gentle and scalable processes Food science - nutrition interaction Consumer preference/acceptance/needs guided processesExamples of emerging technologies include: High hydrostatic pressure Pulsed electric fields or pulsed lights Radiofrequency or ohmic heating Cold atmospheric plasma Electron beams, UV and IR lights Dense gases as well as other emerging thermal Non-thermal or sub-zero processes Food constituents carrier and delivery systems Biopolymers and membrane processes

Life sciences

Physical sciences & Engineering

Social sciences & Humanities

Health