Limited Offer
The Mechanical Behaviour of Engineering Materials
The Commonwealth and International Library: Structures and Solid Body Mechanics Division
- 1st Edition - October 22, 2013
- Author: W. D. Biggs
- Editor: B. G. Neal
- Language: English
- Paperback ISBN:9 7 8 - 1 - 4 8 3 1 - 1 8 6 4 - 2
- eBook ISBN:9 7 8 - 1 - 4 8 3 1 - 5 1 0 6 - 9
The Mechanical Behaviour of Engineering Materials aims to relate properties and structure, and to provide a theoretical basis upon which to extrapolate when conditions or materials… Read more
Purchase options
Institutional subscription on ScienceDirect
Request a sales quoteThe Mechanical Behaviour of Engineering Materials aims to relate properties and structure, and to provide a theoretical basis upon which to extrapolate when conditions or materials outside previous experience arise. The present text refers primarily to metals and alloys, other (non-crystalline) solids are treated rather less fully. This is largely dictated by the state of knowledge at the present time, for although there is a large mass of data concerning the properties of non-metallic materials, much of this is empirical and a full explanation is made difficult by the complexities of an irregular initial structure. The book can be divided into the three sections covering constitution, properties, and significance of test data. Separate chapters discuss properties such as heterogeneity, elasticity, plasticity, and fracture. Subsequent chapters deal with tensile and hardness tests; creep, fatigue and impact tests; and the selection of engineering materials. Throughout the text the author has endeavored to confine the discussion to those aspects of materials science which appear to be reasonably well understood at the present time.
Author's Preface
1. Introduction
2. Constitution
2.1. Introduction
2.2. The Atom
2.3. Interatomic Forces
2.4. Interatomic Distances
2.5. Arrangement of Atoms
2.6. Crystalline Materials
2.7. Amorphous Materials
2.8. Thermal Changes
Further Reading
3. Heterogeneity
3.1. Introduction
3.2. Metals
3.3. Non-metallic Materials
3.4. Defect Lattice
3.5. Vacant Sites and Interstitial Atoms
3.6. Foreign Atoms
3.7. Dislocations
Further Reading
4. Elastic Solids
4.1. Introduction
4.2. Elastic Body
4.3. Viscous Body
4.4. Yield Limit
4.5. Forces Involved in Elasticity
4.6. Elastic Constants
4.7. Anisotropy
4.8. High Elasticity
Further Reading
5. Departures from Ideal Elasticity
5.1. Introduction
5.2. Combinations of Behavior
5.3. Relaxation
5.4. Consequences of Non-ideal Deformation
Further Reading
6. Plasticity
6.1. Introduction
6.2. Slip in Crystals
6.3. Theoretical Shear Stress and Dislocations
6.4. Some Properties of Dislocations
6.5. Strengthening of Metals
6.6. Stability of Strain Hardened State
6.7. Viscosity
6.8. Creep
Further Reading
7. Fracture
7.1. Introduction
7.2. Ductile Fracture
7.3. Brittle Fracture
7.4. Griffith Theory
7.5. Formation of Cracks by Plastic Flow
7.6. Notch Brittleness
7.7. Transition Temperature
7.8. Fatigue
7.9. Factors Affecting Fatigue Life
7.10. Plastic Fatigue
Further Reading
8. Tensile and Hardness Tests
8.1. Introduction
8.2. Effect of Structure on Properties
8.3. The Tensile Testing Machine
8.4. The Tensile Test
8.5. Strength in the Tensile Test
8.6. Hardness Tests
Further Reading
9. Creep, Fatigue and Impact Tests
9.1. Creep Tests
9.2. Fatigue Tests
9.3. Notch Impact Tests
Further Reading
10. The Selection of Materials of Construction
10.1. Introduction
10.2. Properties Associated with Function
10.3. Properties Associated with Fabrication
10.4. Selection Methods
Further Reading
Problems
Appendix 1. Typical Physical and Mechanical Properties of Some Metals and Alloys
Appendix 2. Typical Properties of Some Non-metallic Materials
Index
- No. of pages: 156
- Language: English
- Edition: 1
- Published: October 22, 2013
- Imprint: Pergamon
- Paperback ISBN: 9781483118642
- eBook ISBN: 9781483151069