Skip to main content
View Cart

Books in Physical sciences and engineering

  • Ultrathin Polymer Films

    Confinement Effects and Structural Properties
    • 1st Edition
    • Sabu Thomas + 1 more
    • English
    Ultrathin Polymer Films: Confinement Effects and Structural Properties brings together cutting-edge research into polymeric ultrathin films below 100nm, covering preparation, characterization, measurement of structural properties, and applications.The book begins by introducing polymer confinement and anomalous behavior, and then describes the latest techniques for the preparation and characterization of ultrathin film. Subsequent chapters provide detailed, methodical coverage of the various steps and key factors in the process, especially relating to properties, including glass transition behavior, density variation, dewetting and stability, effect of supercritical carbon dioxide, relaxation of the swollen polymer, and the structure and swelling of block copolymer thin films. Throughout the book, the authors address the existing discrepancies and challenges relating to the effect of confinement on structural properties and their measurement, and aim to guide the reader towards novel applications.This is a valuable resource for researchers and advanced students in polymer science, polymer chemistry, nanotechnology, materials science, and chemical engineering, as well as for engineers, scientists, and R&D professionals with an interest polymer-based ultrathin films for industrial applications.

  • Renewable Photocatalysts

    Technologies, Applications, Economics, Environmental Analysis, and a Sustainable Future
    • 1st Edition
    • Hui Xu + 2 more
    • English
    Renewable Photocatalysts: Technologies, Applications, Economics, Environmental Analysis, and a Sustainable Future offers an innovative and broad approach to photocatalysts, integrating design, materials, methods, applications, economics, and sustainable development. The book begins by introducing solar energy and catalysis, before delving into cutting-edge photocatalyst technologies and applications. The third section focuses on regulations, economics, and commercialization, before the final chapters provide further in-depth coverage of environmental considerations, life cycle, and applications. The lens of sustainable development is applied throughout the book, with a view to developing renewable photocatalysts that support the reduction of CO2 emissions, net zero goals, and sustainable development. This is a valuable resource for researchers, students, faculty, engineers, R&D, scientists, and policy makers, with an interest in solar energy, photocatalysts, and sustainable development.

  • Carbon Fiber Reinforced Thermoplastic Composites

    Fabrication, Properties and Applications
    • 1st Edition
    • Md Zillur Rahman + 2 more
    • English
    Carbon Fiber Reinforced Thermoplastic Composites: Fabrication, Properties and Applications covers both current and emerging research trends in the development of multifunctional CFRTCs, as well as their fabrication, properties, and performance evaluation. The book also addresses significant issues and emerging challenges related to CFRTC manufacturing, including processing parameters, damage mechanisms, machining, recycling, and sustainability. Additionally, it covers molecular modeling, dynamic simulations, and 3D printing. It will be a valuable reference resource for academic and industrial researchers, materials scientists and engineers, manufacturers, and other professionals working in the development of carbon fiber reinforced thermoplastic composites and their related applications.

  • AI-Driven Urban Planning

    Shaping the Future of Cities
    • 1st Edition
    • Zhong-Ren Peng
    • English
    AI-Driven Urban Planning: Shaping the Future of Cities presents a comprehensive guide to the transformative potential of artificial intelligence in urban planning. This book equips readers with the knowledge to harness data, analytics, and AI for creating sustainable, equitable, and livable urban environments. Exploring diverse applications—from understanding human mobility patterns to enhancing disaster response strategies and optimizing design processes—the book offers practical projects and illustrates how AI is shaping contemporary urban landscapes. By addressing both theoretical and practical dimensions, this resource aims to empower students, professionals, and policymakers with a holistic understanding of Urban Planning AI.It is organized into five parts, each tackling crucial aspects of Urban Planning AI. It first introduces core concepts, types, mechanisms, and ethical considerations surrounding AI. Part II then discusses the history of computer applications in urban and regional planning. Part III focuses on AI Applications in Urban Planning, addressing critical domains such as transportation, environmental, housing, economic, participatory, and health and safety planning. Part IV tackles challenges and ethical considerations, emphasizing equity, transparency, and data-related issues. Lastly, Part V explores future pathways of urban planning AI, discussing current trends, future visions, and interdisciplinary approaches essential for effective governance and policymaking.

  • Bioenergy Production from Municipal Sewage Sludge

    Technological Advancements and Greenhouse Gases Emissions
    • 1st Edition
    • Qilin Wang + 3 more
    • English
    Bioenergy Production from Municipal Sewage Sludge: Technological Advancements and Greenhouse Gases Emissions considers various bioenergy production applications and sewage waste sludge treatments that promote further development of bioenergy, a key player in the industry’s transition to net zero. Specific chapters cover bioenergy production in the sludge anaerobic digestion process, pyrolysis of sludge for bioenergy production, and the potential limitations or challenges of bioenergy production from sludge. The book also carefully considers greenhouse gas emissions and control in sludge treatment processes.Written for undergraduate and graduate students studying environmental science, engineering, or related fields, as well as industrial researchers, practitioners, and wastewater treatment plant operators alike, this is sure to be a welcomed resource.

  • Environmental Turbulence

    From Fundamental Physics to Critical Applications
    • 1st Edition
    • Elie Bou-Zeid + 1 more
    • English
    Environmental Turbulence: From Fundamental Physics to Critical Applications explains how to understand environmental and geophysical turbulence, both at a theoretical level and in engineering applications. Sections cover the effects of these new features on the fundamental flow dynamics in relatively simple domains. That is, how the turbulence statistics and structure are modified by the stabilizing or destabilizing effects of buoyancy and rotation is surveyed. Scalar transport is also described in detail. Flow in more complex domains is then described, focusing on vegetated and urban canopies, wind farms, air-sea interfaces, the upper ocean and clouds.Turbulence in environmental media is strongly modulated by buoyancy forces at all scales and by rotation at the largest scales, in contrast to canonical turbulent flows. It is rarely steady, which can give rise to non-equilibrium effects, and the domains such as wind farms or cities are often quite complex, leading to more intricate dynamics than in classic wall-bounded or free shear flows.

  • Elementary Kinetic Modelling in Catalytic Reaction Engineering

    • 1st Edition
    • Joris W. Thybaut + 5 more
    • English
    Elementary Kinetic Modelling in Catalytic Reaction Engineering is a practical focused text that brings together the relevant basics for reaction engineering and shows their applications to a wide variety of examples, whilst looking at the intrinsic kinetics data acquisition, reaction mechanism elucidation, elementary step-based modelling and model-based design and optimization involved.The book aims at spanning the entire process from acquisition of the relevant data in dedicated experimental set-ups, over the proper treatment of the data and the corresponding interpretation up to the quantification of the gained understanding in a model. The latter aspect allows the reader to challenge the interpretation made of the data and design subsequent experiments or improve the interpretation/model formulation. The coverage is not just limited to the generic (theoretical) principles but will also carefully consider and explain their application to a variety of real-life applications including gas- and liquid-phase reactions, heterogeneously catalyzed reactions involving adsorption either in the Henry regime or at full saturation of the catalyst or combined homogeneous-heteroge... reactions.Elementary Kinetic Modelling in Catalytic Reaction Engineering is written primarily for graduate students and postdoc researchers in chemical engineering or applied industrial chemistry studying chemical reaction engineering and catalysis, as well as physical chemists studying kinetics.

  • Natural Polymer-Based Films and Coatings in Food Technology

    • 1st Edition
    • Ewelina Jamróz + 1 more
    • English
    Natural Polymer-Based Films and Coatings in Food Technology provides a thorough overview of several bio-based polymers used in the preparation of single- or multi-layer films and coatings, as well as their current and potential applications in the field of food science. The book starts with an introduction to biopolymer films and coatings, followed by a discussion of their properties, production, and utilization as smart packaging materials. It then discusses the applications and future trends of biopolymer films and coatings in food technology, as well as the interaction between food and packaging, including chemical migration.In the last chapters, the book addresses materials’ biodegradation, lifecycle assessment, and packaging legal regulations, ending with a presentation of real-world examples of industrial and commercial applications. This book is a valuable resource for academic and industrial researchers, materials scientists, and R&D professionals seeking to explore the advancements and applications of natural polymer-based films and coatings in the food industry.

  • Seismic Retrofit of Buildings

    Portal Frames, Performance-Based Plastic Design, and Detailing Techniques
    • 1st Edition
    • Moosa Mazloom
    • English
    Moderate to severe earthquakes can cause vast damage to buildings and their foundations, endangering the lives of residents and leading to complex and costly search, rescue, and clean-up efforts. Seismic Retrofit of Buildings provides in-demand information on state-of-the-art technology and materials that are reshaping the field, with a particular focus on prefabricated, moment-resisting steel portal frames.The book’s gradual introduction of performance-based plastic design concepts primes readers for the acquisition of in-depth technical competence in the implementation of solutions that not only improve the overall safety of a structure in the event of life-threatening ground motions but also offer advantages of both cost-effective and practical resilience significance. Rehabilitation issues, specialized techniques, considerations related to aesthetic appeal, construction drawings, functional detailing, photos from real-life projects, and other practice-informed insights are all included to make up a carefully composed and balanced reference resource that is of value for audiences in both academia and industry.

  • Nanocellulose for Biomedical Applications

    • 1st Edition
    • Jayanta Kumar Patra + 5 more
    • English
    Nanocellulose for Biomedical Applications thoroughly reviews the core principles and practical aspects for the synthesis and application of nanocellulose in biomedicine. The book begins with coverage of the production and properties of nanocellulose, detailing the unique physico-chemical properties, surface modification and characterization techniques, and synthesis and sterilization methods of various nanocellulose types. A key selection of biomedical applications is reviewed - including tissue engineering, drug delivery, and sensing - detailing the benefits and challenges of nanocellulose in each and enabling readers to make informed materials selections. Finally, the commercial aspects of nanocellulose-based products are explored, from lifecycle assessment and industrial-scale production to degradation pathways and environmental impacts. This book provides an interdisciplinary resource that will be of interest to researchers and academics in materials science, biomaterials, nanotechnology, tissue engineering, pharmaceutical science, and microbiology.

Related subjects