Fracture mechanics print books and ebooks | Elsevier

Fiber Fracture

1st Edition
November 15, 2002
M. Elices + 1 more
English
Hardback
9 7 8 0 0 8 0 4 4 1 0 4 7
eBook
9 7 8 0 0 8 0 5 3 1 6 5 6

The idea for this book came out of the EURESCO Conference on High Performance Fibers: Euroconference on Fiber Fracture in 2000. Many of the books that are currently available look at different aspects of fiber processing, properties, or applications, but none are focussed on the fracture behaviour of fibers. This book presents the mechancisms and models of fiber fracture currently available for both natural and synthetic fibers, and it is expected that increasingly there will be cross fertilization between the fields, opening new frontiers in academic research and more competitive products for industry. It covers the following areas of fiber fracture: ceramic fibers; glass fibers; carbon filters; metallic fibers and thin wires; polymeric fibers; and carbon nanotubes.

Fundamental Issues and Applications of Shock-Wave and High-Strain-Rate Phenomena

1st Edition
February 8, 2001
K.P. Staudhammer + 2 more
English
Hardback
9 7 8 0 0 8 0 4 3 8 9 6 2
eBook
9 7 8 0 0 8 0 5 5 0 7 7 0

This book contains the proceedings of EXPLOMET™ 2000, International Conference on Fundamental Issues and Applications of Shock-Wave and High-Strain-Rate Phenomena, held in Albuquerque, New Mexico, 2000; the fifth in the EXPLOMET™ quinquennial series which began in Albuquerque in 1980.The book is divided into five major sections with a total of 85 chapters. Section I deals with materials issues in shock and high strain rates while Section II covers shock consolidation, reactions, and synthesis. Materials aspects of ballistic and hypervelocity impact are covered in Section III followed by modeling and simulation in Section IV and a range of novel applications of shock and high-strain-rate phenomena in Section V.Like previous conference volumes published in 1980, 1985, and 1995, the current volume includes contributions from fourteen countries outside the United States. As a consequence, it is hoped that this book will serve as a global summary of current issues involving shock and high-strain-rate phenomena as well as a general reference and teaching componant for specializd curricula dealing with these features in a contemporary way.Over the past twenty years, the EXPLOMET™ Conferences have created a family of participants who not only converse every five years but who have developed long-standing interactions and professional relationships which continue to stimulate new concepts and applications particularly rooted in basic materials behavior.

Fracture Mechanics: Applications and Challenges

1st Edition
Volume 26
September 13, 2000
M. Fuentes + 3 more
English
Hardback
9 7 8 0 0 8 0 4 3 6 9 9 9
eBook
9 7 8 0 0 8 0 5 3 1 9 9 1

This book contains 15 fully peer-reviewed Invited Papers which were presented at the 13th Biennial European Conference on Fracture and is a companion to the CD-ROM http://www.elsevier.... organisers of the ECF 13 opted from the very beginning for an application-orientat... conference, and consequently, this book contributes to the understanding of fracture phenomena, and disseminates fracture concepts and their application to the solution of engineering problems to practitioners in a wide range of fields.The fields covered in this book can be broadly classified into: elastic-plastic fracture mechanics, fracture dynamics, fatigue and interactive processes, failure, structural integrity, coatings and materials, with applications to the following industrial sectors: transport, aerospace engineering, civil engineering, pipelines and automotive engineering.

Small Fatigue Cracks

1st Edition
September 30, 1999
K.S. Ravichandran + 2 more
English
Hardback
9 7 8 0 0 8 0 4 3 0 1 1 9
eBook
9 7 8 0 0 8 0 5 6 9 7 0 3

This book contains the fully peer-reviewed papers presented at the Third Engineering Foundation Conference on Small Fatigue Cracks, held under the chairmanship of K.S. Ravichandran and Y. Murakami during December 6-11, 1998, at the Turtle Bay Hilton, Oahu, Hawaii. This book presents a state-of-the-art description of the mechanics, mechanisms and applications of small fatigue cracks by most of the world's leading experts in this field. Topics ranging from the mechanisms of crack initiation, small crack behavior in metallic, intermetallic, ceramic and composite materials, experimental measurement, mechanistic and theoretical models, to the role of small cracks in fretting fatigue and the application of small crack results to the aging aircraft and high-cycle fatigue problems, are covered.

Multiaxial Fatigue and Fracture

1st Edition
Volume 25
September 6, 1999
E. Macha + 2 more
English
eBook
9 7 8 0 0 8 0 5 3 7 1 2 2

This volume contains 18 papers selected from 90 presented at the Fifth International Conference on Biaxial/Multiaxial Fatigue and Fracture held in Cracow, Poland 8-12 September 1997. The papers in this book deal with theoretical, computational and experimental aspects of the multiaxial fatigue and fracture of engineering materials and structures. The papers are divided into the following four categories:1. Proportional cyclic loading2. Non-proportional cyclic loading3. Variable amplitude and random loading4. Crack growthMost papers in this publication talk about the behaviour of constructional materials and elements of machines under non-proportional loading and under variable amplitude and random loading, which are more realistic load histories met in industrial practice. Variable amplitude loading under cyclic load with basic frequency and random loading under load with a continuous band of frequency is classified here. This book gives a review of the latest world success and directions of investigations on multiaxial fatigue and fracture. More and more often publications are results of the co-operation of researchers from different laboratories and countries. Seven out of eighteen papers included here were worked out by international authors teams. This is a symptom of the times, when science and investigations know no borders.

Cracks and Fracture

1st Edition
February 24, 1999
K. Bertram Broberg
English
Hardback
9 7 8 0 1 2 1 3 4 1 3 0 5
eBook
9 7 8 0 0 8 0 5 0 3 2 7 1

Cracks and Fracture consists of nine chapters in logical sequence. In two introductory chapters, physical processes in the vicinity of the crack edge are discussed and the fracture process is described. Chapter 3 develops general basic concepts and relations in crack mechanics, such as path independent integrals, stress intensity factors and energy flux into the crack edge region. Chapters 4-7 deal with elastostatic cracks, stationary or slowly moving elastic-plastic cracks, elastodynamic crack mechanics and elastoplastic aspects of fracture, including dynamic fracture mechanics. Appendices include general formulae, the basic theory of analytic functions, introduction to Laplace and Hankel transforms and description of certain basic relations, for instance for stress waves in solids. There is an extensive bibliography, containing references to both classical and recent work, and a comprehensive index.

Fatigue Design and Reliability

1st Edition
Volume 23
February 19, 1999
G. Marquis + 1 more
English
eBook
9 7 8 0 0 8 0 5 3 1 6 1 8

This volume represents a selection of papers presented at the Third International Symposium on Fatigue Design, Fatigue Design 1998, held in Espoo, Finland, 26-29 May, 1998.One objective of this symposium series was to help bridge the gap that sometimes exists between researchers and engineers responsible for designing components against fatigue failure. The 21 selected papers provide an up-to-date survey of engineering practice and a preview of design methods that are advancing toward application.Reliabil... was selected as a key theme for FD'98. During the design of components and structures, it is not sufficient to combine mean material properties, average usage parameters, and pre-selected safety factors. The engineer must also consider potential scatter in material properties, different end users, manufacturing tolerances and uncertainties in fatigue damage models. Judgement must also be made about the consequences of potential failure and the required degree of reliability for the structure or component during its service life.Approaches to ensuring reliability may vary greatly depending on the structure being designed. Papers in this volume intentionally provide a multidisciplinary perspective on the issue. Authors represent the ground vehicle, heavy equipment, power generation, ship building and other industries. Identical solutions cannot be used in all cases because design methods must always provide a balance between accuracy and simplicity. The point of balance will shift depending on the type of input data available and the component being considered.

Engineered Interfaces in Fiber Reinforced Composites

1st Edition
October 21, 1998
Jang-Kyo Kim + 1 more
English
Hardback
9 7 8 0 0 8 0 4 2 6 9 5 2
eBook
9 7 8 0 0 8 0 5 3 0 9 7 0

The study and application of composite materials are a truly interdisciplinary endeavour that has been enriched by contributions from chemistry, physics, materials science, mechanics and manufacturing engineering. The understanding of the interface (or interphase) in composites is the central point of this interdisciplinary effort. From the early development of composite materials of various nature, the optimization of the interface has been of major importance. While there are many reference books available on composite materials, few of them deal specifically with the science and mechanics of the interface of fiber reinforced composites. Further, many recent advances devoted solely to research in composite interfaces have been scattered in a variety of published literature and have yet to be assembled in a readily accessible form. To this end this book is an attempt to bring together recent developments in the field, both from the materials science and mechanics perspective, in a single convenient volume.The central theme of the book is tailoring the interface properties to optimise the mechanical peformance and structural integrity of composites with enhanced strength/stiffness and fracture toughness (or specific fracture resistance). It deals mainly with interfaces in advanced composites made from high performance fibers, such as glass, carbon, aramid, ultra high modulus polyethylene and some inorganic (e.g. B/W, A12O3, SiC) fibers, and matrix materials encompassing polymers, metals/alloys and ceramics. The book is intended to provide a comprehensive treatment of composite interfaces in such a way that it should be of interest to materials scientists, technologists and practising engineers, as well as graduate students and their supervisors in advanced composites. We hope that this book will also serve as a valuable source of reference to all those involved in the design and research of composite interfaces.The book contains eight chapters of discussions on microstructure-prope... relationships with underlying fundamental mechanics principles. In Chapter 1, an introduction is given to the nature and definition of interfaces in fiber reinforced composites. Chapter 2 is devoted to the mechanisms of adhesion which are specific to each fiber-matrix system, and the physio-chemical characterization of the interface with regard to the origin of adhesion. The experimental techniques that have been developed to assess the fiber-matrix interface bond quality on a microscopic scale are presented in Chapter 3, along with the techniques of measuring interlaminar/intrala... strengths and fracture toughness using bulk composite laminates. The applicability and limitations associated with loading geometry and interpretation of test data are compared. Chapter 4 presents comprehensive theoretical analyses based on shear-lag models of the single fiber composite tests, with particular interest being placed on the interface debond process and the nature of the fiber-matrix interfacial bonding. Chapter 5 is devoted to reviewing current techniques of fiber surface treatments which have been devised to improve the bond strength and the fiber-matrix compatibility/stabil... during the manufacturing processes of composites. The micro-failure mechanisms and their associated theories of fracture toughness of composites are discussed in Chapter 6. The roles of the interface and its effects on the mechanical performance of fiber composites are addressed from several viewpoints. Recent research efforts to augment the transverse and interlaminar fracture toughness by means of controlled interfaces are presented in Chapters 7 and 8.

Damage Mechanics in Engineering Materials

1st Edition
Volume 46
March 4, 1998
Jiann-Wen Woody Ju + 2 more
English
eBook
9 7 8 0 0 8 0 5 3 0 2 3 9

This book contains thirty peer-reviewed papers that are based on the presentations made at the symposium on "Damage Mechanics in Engineering Materials" on the occasion of the Joint ASME/ASCE/SES Mechanics Conference (McNU97), held in Evanston, Illinois, June 28-July 2, 1997. The key area of discussion was on the constitutive modeling of damage mechanics in engineering materials encompassing the following topics: macromechanics/micro... constitutive modeling, experimental procedures, numerical modeling, inelastic behavior, interfaces, damage, fracture, failure, computational methods. The book is divided into six parts: Study of damage mechanics. Localization and damage. Damage in brittle materials. Damage in metals and metal matrix composites. Computational aspects of damage models. Damage in polymers and elastomers.

Fatigue '96

1st Edition
May 20, 1996
G. Lütjering + 1 more
English
eBook
9 7 8 0 0 8 0 5 5 2 8 2 8

The aim of the 6th International Fatigue Congress, besides covering the entire field of fatigue, was to promote the intimate connection between basic science and engineering application by the selection of appropriate session topics.Fatigue is the main cause of failure of engineering structures and components. Making reliable fatigue predictions is highly difficult because knowledge about fatigue mechanisms in all stages of the fatigue process must be developed much further. In addition, the decreasing availability of raw materials and energy resources forces engineers to continually reduce the weight of constructions. This congress presents research results also particularly for new materials, including composites. Researchers, on the other hand, are confronted with the engineering demands. Futhermore, the overwhelming development which is presently taking place in the field of computer software and hardware dealing with fatigue problems is outlined along with the directions of future developments in all areas of fatigue.Close to 300 fully peer-reviewed papers are published in the proceedings, including nearly 30 overview and keynote papers covering the various session topics. The proceedings should therefore serve as a comprehensive review of the fatigue field at the present state-of-the-art, suitable for scientists, engineers and students.

Life Sciences

Physical Sciences & Engineering

Social Sciences & Humanities

Health

Books in Fracture mechanics