Books in Corrosion

The Fundamentals of Corrosion and Scaling for Petroleum and Environmental Engineers

1st Edition
September 1, 2008
George V Chilingar + 2 more
English
eBook
9 7 8 0 1 2 7 9 9 9 9 1 3

Scale, or deposits, can build up in the wellbore tubulars and other downhole components, causing considerable damage to the life of the well. Infrastructure provides the support for the wells system and with oil and gas consumption on the rise and transportation required to feed that demand, all petroleum and pipeline engineers must have accurate corrosion and scaling information. The Fundamentals of Corrosion and Scaling for Petroleum and Environmental Engineers will provide the quick knowledge that engineers need to not only enhance the reliability of corrosion and scale control technologies but also manage scale deposits, prevent fatigue and ensure equipment integrity.

Developments in High Temperature Corrosion and Protection of Materials

1st Edition
April 9, 2008
W Gao
English
eBook
9 7 8 1 8 4 5 6 9 4 2 5 8

High temperature corrosion is a phenomenon that occurs in components that operate at very high temperatures, such as gas turbines, jet engines and industrial plants. Engineers are constantly striving to understand and prevent this type of corrosion. This book examines the latest developments in the understanding of high temperature corrosion processes and protective oxide scales and coatings.Part one looks at high temperature corrosion. Chapters cover diffusion and solid state reactions, external and internal oxidation of alloys, metal dusting corrosion, tribological degradation, hot corrosion, and oxide scales on hot-rolled steel strips. Modern techniques for analysing high temperature oxidation and corrosion are also discussed. Part two discusses methods of protection using ceramics, composites, protective oxide scales and coatings. Chapters focus on layered ternary ceramics, alumina scales, Ti-Al intermetallic compounds, metal matrix composites, chemical vapour deposited silicon carbide, nanocrystalline coatings and thermal barrier coatings. Part three provides case studies illustrating some of the challenges of high temperature corrosion to industry and how they can be overcome. Case studies include the petrochemical industry, modern incinerators and oxidation processing of electronic materials.This book is a valuable reference tool for engineers who develop heat resistant materials, mechanical engineers who design and maintain high temperature equipment and plant, and research scientists and students who study high temperature corrosion and protection of materials.

Corrosion Under Insulation (CUI) Guidelines

1st Edition
Volume 55
March 20, 2008
English
eBook
9 7 8 1 8 4 5 6 9 4 2 7 2

Corrosion under insulation (CUI) refers to the external corrosion of piping and vessels that occurs underneath externally clad/jacketed insulation as a result of the penetration of water. By its very nature CUI tends to remain undetected until the insulation and cladding/jacketing is removed to allow inspection or when leaks occur. CUI is a common problem shared by the refining, petrochemical, power, industrial, onshore and offshore industries.The European Federation of Corrosion (EFC) Working Parties WP13 and WP15 have worked to provide guidelines on managing CUI together with a number of major European refining, petrochemical and offshore companies including BP, Chevron-Texaco, Conoco-Phillips, ENI, Exxon-Mobil, IFP, MOL, Scanraff, Statoil, Shell, Total and Borealis. The guidelines within this document are intended for use on all plants and installations that contain insulated vessels, piping and equipment. The guidelines cover a risk-based inspection methodology for CUI, inspection techniques (including non-destructive evaluation methods) and recommended best practice for mitigating CUI, including design of plant and equipment, coatings and the use of thermal spray techniques, types of insulation, cladding/jacketing materials and protection guards. The guidelines also include case studies.

Techniques for Corrosion Monitoring

1st Edition
February 1, 2008
English
eBook
9 7 8 1 8 4 5 6 9 4 0 5 0

Corrosion monitoring techniques play a key role in efforts to combat corrosion, which can have major economic and safety implications. This important book starts with a review of corrosion fundamentals and provides a four-part comprehensive analysis of a wide range of methods for corrosion monitoring, including practical applications and case studies.The first part of the book reviews electrochemical techniques for corrosion monitoring, such as polarization techniques, potentiometric methods, electrochemical noise and harmonic analyses, galvanic sensors, differential flow through cells and multielectrode systems. A second group of chapters analyses the physical or chemical methods of corrosion monitoring. These include gravimetric, radioactive tracer, hydrogen permeation, electrical resistance and rotating cage techniques. Part II also includes a chapter on the innovative nondestructive evaluation technologies that can be used to monitor corrosion. Part III examines corrosion monitoring in special environments such as microbial systems, concrete and soil, and remote monitoring and model predictions. A final group of chapters includes various case studies covering ways in which corrosion monitoring can be applied to engine exhaust systems, cooling water systems, pipelines, equipment in chemical plants, and other real world systems.With its distinguished editor and international team of contributors, Techniques for corrosion monitoring is a valuable reference guide for engineers and scientific and technical personnel who deal with corrosion in such areas as automotive engineering, power generation, water suppliers and the petrochemical industry.

Innovative Pre-Treatment Techniques to Prevent Corrosion of Metallic Surfaces

1st Edition
Volume 54
August 16, 2007
L Fedrizzi + 2 more
English
eBook
9 7 8 1 8 4 5 6 9 3 6 8 8

There has long been a need for effective pre-treatment techniques to prevent corrosion of metallic surfaces. This important volume discusses key research on the development of pre-treatment techniques for a range of metals. Chapters review various coatings and preparation methods for aluminium and aluminium alloys such as silane films, sol-gel coatings and magnesium-rich primers. Further chapters discuss the pre-treatment methods for steel, copper and magnesium alloys. The book also assesses methods for monitoring the effectiveness of pre-treatments, covering dissolution-precipit... mechanisms and their electrochemical behaviour.Innovative pre-treatment techniques to prevent corrosion of metallic surfaces is a valuable reference for all those concerned with corrosion problems and the use of pre-treatment techniques in the coatings industry.

Corrosion in Refineries

1st Edition
Volume 42
July 12, 2007
J Harston
English
eBook
9 7 8 1 8 4 5 6 9 3 2 4 4

Corrosion in ageing refinery plant presents a serious safety hazard. This important book summarises key research into corrosion processes in refinery equipment, how it can be measured and controlled. The book reviews factors affecting corrosion such as carburisation and metal dusting as well as corrosion in steel and other materials used in refinery technology. It considers corrosion in a range of refinery equipment such as storage tanks, HF alkylation units, sour water strippers and insulated units. Other chapters discuss ways of testing for corrosion and cracking in refineries together with integrity and life cycle assessment techniques. There is also coverage of ways of trouble-shooting corrosion problems and preventative measures such as coating systems.With its distinguished editor and team of contributors, Corrosion in refineries is a valuable reference for all those concerned with building and maintaining refineries in the petrochemical industry.

Standardisation of Thermal Cycling Exposure Testing

1st Edition
Volume 53
July 10, 2007
M Schütze + 1 more
English
eBook
9 7 8 1 8 4 5 6 9 3 4 7 3

The thermal cyclic oxidation test has become one of the most widely accepted ways of measuring high temperature corrosion. There has long been a need for an agreed code of practice with standardised methods and procedures to ensure both the comparability and reliability of the results obtained. Based on an EU project, ‘Cyclic oxidation testing – development of a code of practice for the characterisation of high temperature materials performance’ (COTEST), this volume provides the essential background to an appropriate code of practice.The first part of the book reviews the range of existing test procedures. Part two summarises research on the influence of various test parameters on thermal cycling oxidation behaviour, including both long dwell and short dwell thermal cycling oxidation. The third and final part of the book describes the resulting code of practice which is being considered by the ISO/TC 156 Working Group 13 responsible for an appropriate international standard.With its distinguished editor and team of contributors, this important book is a standard reference for all those conducting thermal cycling oxidation testing or assessing its implications in such sectors as the power industry.

Corrosion Issues in Light Water Reactors

1st Edition
Volume 51
June 22, 2007
D Féron + 1 more
English
eBook
9 7 8 1 8 4 5 6 9 3 4 6 6

Stress corrosion cracking is a major problem in light water nuclear reactors, whether pressurised water reactors (PWRs) or boiling water reactors (BWRs). The nuclear industry needs to be able to predict the service life of these power plants and develop appropriate maintenance and repair practices to ensure safe long term operation. This important book sums up key recent research on corrosion in light water reactors and its practical applications.The book is divided into four parts. It begins with an overview of materials degradation due to stress corrosion, corrosion potential monitoring and passivation. Part two summarises research on susceptibility of materials to stress corrosion cracking and the ways it can be initiated. The third part of the book considers stress corrosion crack propagation processes whilst the final part includes practical case studies of corrosion in particular plants. The book reviews corrosion in a range of materials such as low alloy steels, stainless steels and nickel-based alloys.With its distinguished editor and team of contributors, Corrosion issues in light water reactors is a standard work for the nuclear industry.

Corrosion by Carbon and Nitrogen

1st Edition
Volume 41
June 8, 2007
H Grabke + 1 more
English
eBook
9 7 8 1 8 4 5 6 9 3 3 5 0

Metal dusting is a form of corrosion involving the disintegration of metals and alloys into a dust of graphite and metal particles when exposed to a carburizing atmosphere. This important book reviews the factors affecting metal dusting and how it can be prevented in sectors such as the chemical and petrochemical industries and in the direct reduction of iron ores. It also considers the related corrosion phenomena of carburization and nitridation.After an introductory chapter setting out the key processes involved in metal dusting, the book reviews how this corrosion process affects a range of metals such as iron and steel, as well as nickel-based and chromium-based high-temperature alloys. There are chapters on the effects of particular gas mixtures on the corrosion process and on the use of coatings to prevent metal dusting. Processes involved in carburization and nitridation are also described and discussed.With its distinguished editors and team of contributors, Corrosion by carbon and nitrogen is a valuable reference for all those concerned with understanding and preventing these corrosion processes in various industries.

Corrosion Behaviour and Protection of Copper and Aluminium Alloys in Seawater

1st Edition
Volume 50
May 17, 2007
D Féron
English
eBook
9 7 8 1 8 4 5 6 9 3 0 8 4

Copper and aluminium alloys are widely used in marine engineering in areas such as pipelines, storage tanks, ships’ hulls and cladding for offshore structures. This important book reviews key factors affecting the corrosion and service life of these materials in the marine environment. The book is divided into five parts, with part one reviewing key aspects of the corrosion behaviour of both these alloys. Part two discusses the use of copper and copper-nickel alloys in seawater, whilst Parts 3 and 4 cover aluminium bronzes and alloys. The final section of the book covers the use of aluminium-based materials as anodes for the cathodic protection of marine structures.Corrosion behaviour and protection of copper and aluminium alloys in seawater is an important reference for marine engineers concerned with the corrosion and service life of these materials.

Life Sciences

Physical Sciences & Engineering

Social Sciences & Humanities

Health