Skip to main content
Elsevier
View Cart
openUserAccount

Books in Corrosion

BooksJournals
21-30 of 54 results in All results

Rare Earth-Based Corrosion Inhibitors

  • 1st Edition
  • August 2, 2014
  • Maria Forsyth + 1 more
  • English
  • eBook
    9 7 8 - 0 - 8 5 7 0 9 - 3 5 8 - 5
Corrosion inhibitors are an important method for minimizing corrosion; however traditional inhibitors such as chromates pose environmental problems. Rare earth metals provide an important, environmentally-friendly alternative. This book provides a comprehensive review of current research and examines how rare earth metals can be used to prevent corrosion and applied to protect metals in such industries as aerospace and construction. Chapter 1 begins by examining the important need to replace chromate, and then goes on to discuss the chemistry of the rare earth metals and their related compounds. Chapter 2 considers the techniques that can be used to identify corrosion inhibition mechanisms and to test the levels of protection offered to different metals by rare earth compounds. Subsequent chapters consider in more detail how rare earth elements can be used as corrosion inhibitors in different forms and for different metals. This includes discussion on the potential of rare earth elements for self-healing, tunable and multifunctional coatings. Finally, chapter 10 considers the cost and availability of the rare earths and the potential health and environmental risks associated with extracting them.

Marine and Offshore Corrosion

  • 1st Edition
  • May 12, 2014
  • Kenneth A Chandler
  • English
  • eBook
    9 7 8 - 1 - 4 8 3 1 - 9 2 2 5 - 3
Marine and Offshore Corrosion describes the principles of effective corrosion control treatments in marine environments, with emphasis on economic solutions to corrosion. The book explains chemical or electrochemical reaction of an alloy with its environment leading to corrosion, and mechanical loss of the metal by erosion, abrasion, or wear resulting also in corrosion. A main consideration of erosion control that the engineer should look into is the economic side. Other considerations that he should investigate are the strength of a structure, time for construction, availability of materials, and costs. The book also discusses the marine environment consisting of sea water, temperature fluctuations, dissolved gases, hydrogen sulphide, ammonia, carbon dioxide, electrical conductivity, fouling. The text describes the selection of materials to be used in marine environments, surface preparation of steel before painting, the type of paint, and metallic coatings. Some of the factors in selecting coating systems are: cost and estimated life before the first scheduled maintenance, adhesion properties, moisture tolerance, elasticity, chemical resistance, impact resistance, bacterial resistance. The factors affecting maintenance include environmental conditions, quality of initial protection applied, type of structure, as well as the design and purpose of the structure. The book has been prepared for engineers and designers who are not corrosion specialists but have to deal with marine corrosion problems as part of their day-to-day professional activities. The text will also turn out to be useful for engineers with general interest in structure, building, or machinery maintenance specially those located near coastal areas.

Corrosion Under Insulation (CUI) Guidelines

  • 1st Edition
  • Volume 55
  • January 23, 2014
  • English
  • eBook
    9 7 8 - 1 - 8 4 5 6 9 - 4 2 7 - 2
Corrosion under insulation (CUI) refers to the external corrosion of piping and vessels that occurs underneath externally clad/jacketed insulation as a result of the penetration of water. By its very nature CUI tends to remain undetected until the insulation and cladding/jacketing is removed to allow inspection or when leaks occur. CUI is a common problem shared by the refining, petrochemical, power, industrial, onshore and offshore industries.The European Federation of Corrosion (EFC) Working Parties WP13 and WP15 have worked to provide guidelines on managing CUI together with a number of major European refining, petrochemical and offshore companies including BP, Chevron-Texaco, Conoco-Phillips, ENI, Exxon-Mobil, IFP, MOL, Scanraff, Statoil, Shell, Total and Borealis. The guidelines within this document are intended for use on all plants and installations that contain insulated vessels, piping and equipment. The guidelines cover a risk-based inspection methodology for CUI, inspection techniques (including non-destructive evaluation methods) and recommended best practice for mitigating CUI, including design of plant and equipment, coatings and the use of thermal spray techniques, types of insulation, cladding/jacketing materials and protection guards. The guidelines also include case studies.

Underground Pipeline Corrosion

  • 1st Edition
  • January 22, 2014
  • Mark Orazem
  • English
  • Hardback
    9 7 8 - 0 - 8 5 7 0 9 - 5 0 9 - 1
  • eBook
    9 7 8 - 0 - 8 5 7 0 9 - 9 2 6 - 6
Underground pipelines transporting liquid petroleum products and natural gas are critical components of civil infrastructure, making corrosion prevention an essential part of asset-protection strategy. Underground Pipeline Corrosion provides a basic understanding of the problems associated with corrosion detection and mitigation, and of the state of the art in corrosion prevention. The topics covered in part one include: basic principles for corrosion in underground pipelines, AC-induced corrosion of underground pipelines, significance of corrosion in onshore oil and gas pipelines, numerical simulations for cathodic protection of pipelines, and use of corrosion inhibitors in managing corrosion in underground pipelines. The methods described in part two for detecting corrosion in underground pipelines include: magnetic flux leakage, close interval potential surveys (CIS/CIPS), Pearson surveys, in-line inspection, and use of both electrochemical and optical probes. While the emphasis is on pipelines transporting fossil fuels, the concepts apply as well to metallic pipes for delivery of water and other liquids. Underground Pipeline Corrosion is a comprehensive resource for corrosion, materials, chemical, petroleum, and civil engineers constructing or managing both onshore and offshore pipeline assets; professionals in steel and coating companies; and academic researchers and professors with an interest in corrosion and pipeline engineering.

Bio-Tribocorrosion in Biomaterials and Medical Implants

  • 1st Edition
  • September 30, 2013
  • Yu Yan
  • English
  • eBook
    9 7 8 - 0 - 8 5 7 0 9 - 8 6 0 - 3
During their service life, most biomaterials and medical implants are vulnerable to tribological damage. In addition, the environments in which they are placed are often corrosive. The combination of triobology, corrosion and the biological environment has been named ‘bio-tribocorrosion’. Understanding this complex phenomenon is critical to improving the design and service life of medical implants. This important book reviews recent key research in this area.After an introduction to the topography of bio-tribocorrosion, Part one discusses different types of tribocorrosion including fatigue-corrosion, fretting-corrosion, wear-corrosion and abrasion-corrosion. The book also discusses the prediction of wear in medical devices. Part two looks at biological effects on tribocorrosion processes, including how proteins interact with material surfaces and the evolution of surface changes due to bio-tribocorrosion resulting from biofilms and passive films. Part three reviews the issue of bio-tribocorrosion in clinical practice, including dental applications and joint replacement as well the use of coatings and test methods for bio-tribocorrosion.With its international team of contributors, Bio-tribocorrosion in biomaterials and medical implants is a standard reference for those researching and developing medical devices as well as clinicians in such areas as dentistry and orthopaedic surgery.

Duplex Systems

  • 1st Edition
  • December 2, 2012
  • J.F.H. van Eijnsbergen
  • English
  • eBook
    9 7 8 - 0 - 4 4 4 - 6 0 0 1 1 - 0
This book is unique in several aspects.• It is the first comprehensive text ever written on the subject of duplex systems, which is the generic term for painted hot-dip galvanized steel.• Both the traditional batch hot-dip galvanizing process and the modern sheet galvanizing processes are covered.• The author offers a combination of practical information, which will enable the engineer to select the proper materials, and scientific background information.• The practical guidelines are backed up and supported by an impressive amount of technical and scientific discussions and justifications.• Modern surface analysis tools and recent applications are described.• The world literature on the subject matter is covered and is up to date.Duplex systems, which are based on the synergistic effect of galvanizing and painting, offer maximum protection against corrosion of steel surfaces in environments where galvanized steel alone cannot offer a sufficiently long resistance against rust formation. Since adhesion problems can be eliminated by the correct application of special paint products, and by sophisticated surface pretreatment and modern surface analyzing methods, duplex systems are nowadays used in a large number of industrial and domestic applications. Major savings can thus be achieved on materials and maintenance cost. Duplex systems serve also where colour is required, e.g. for aesthetic reasons, for enhancing visibility or for camouflaging.The author of this book has an unsurpassed experience in this field and the many case histories of successful (and unsuccessful) use of duplex systems for corrosion prevention provide a wealth of practical information. Including 108 colour illustrations, the book will be useful to a large group of industries, such as the paint, metallurgical, galvanizing, building, automotive, electrical and chemical industries.

Corrosion Protection and Control Using Nanomaterials

  • 1st Edition
  • February 21, 2012
  • V S Saji + 1 more
  • English
  • Paperback
    9 7 8 - 0 - 0 8 - 1 0 1 6 6 1 - 9
  • eBook
    9 7 8 - 0 - 8 5 7 0 9 - 5 8 0 - 0
Corrosion is an expensive and potentially dangerous problem in many industries. The potential application of different nanostructured materials in corrosion protection, prevention and control is a subject of increasing interest. Corrosion protection and control using nanomaterials explores the potential use of nanotechnology in corrosion control.The book is divided into two parts. Part one looks at the fundamentals of corrosion behaviour and the manufacture of nanocrystalline materials. Chapters discuss the impact of nanotechnology in reducing corrosion cost, and investigate the influence of various factors including thermodynamics, kinetics and grain size on the corrosion behaviour of nanocrystalline materials. There are also chapters on electrodeposition and the corrosion behaviour of electrodeposited nanocrystalline materials. Part two provides a series of case studies of applications of nanomaterials in corrosion control. Chapters review oxidation protection using nanocrystalline structures at various temperatures, sol- gel and self-healing nanocoatings and the use of nanoreservoirs and polymer nanocomposites in corrosion control.With its distinguished editors and international team of expert contributors, Corrosion protection and control using nanomaterials is an invaluable reference tool for researchers and engineers working with nanomaterials in a variety of industries including, aerospace, automotive and chemical engineering as well as academics studying the unique protection and control offered by nanomaterials against corrosion.

Tribocorrosion of Passive Metals and Coatings

  • 1st Edition
  • October 12, 2011
  • D Landolt + 1 more
  • English
  • Hardback
    9 7 8 - 1 - 8 4 5 6 9 - 9 6 6 - 6
  • eBook
    9 7 8 - 0 - 8 5 7 0 9 - 3 7 3 - 8
Tribocorrosion causes the degradation or alteration of materials through the combined action of corrosion and wear. It limits the performance and life-time of installations, machines and devices with moving parts, and controls certain manufacturing processes such as chemical–mechanical polishing. The effects of tribocorrosion are most pronounced on passive metals which owe their corrosion resistance to a thin protecting oxide film. Most corrosion-resistant engineering alloys belong to this category.This book provides an introduction to the developing field of tribocorrosion and an overview of the latest research. Part one reviews basic notions of corrosion and tribology, before presenting the most recent results on the growth and structure of passive oxide films. Tribocorrosion mechanisms under fretting, sliding and erosion conditions, respectively, are then discussed. Part two focuses on methods for measuring and preventing tribocorrosion. It includes chapters on electrochemical techniques, the design of tribocorrosion test equipment, data evaluation and the optimisation of materials’ properties for tribocorrosion systems. Part three presents a selection of tribocorrosion problems in engineering and medicine. Three chapters address the tribocorrosion of medical implants including test methods and clinical implications. Other chapters examine tribocorrosion issues in nuclear power plants, marine environments, automotive cooling circuits, elevated-temperature metal working and chemical–mechanical polishing.With its distinguished editors and international team of expert contributors Tribocorrosion of passive metals and coatings is an invaluable reference tool for engineers and researchers in industry and academia confronted with tribocorrosion problems.

Stress Corrosion Cracking

  • 1st Edition
  • September 22, 2011
  • V S Raja + 1 more
  • English
  • Paperback
    9 7 8 - 0 - 0 8 - 1 0 1 6 4 6 - 6
  • eBook
    9 7 8 - 0 - 8 5 7 0 9 - 3 7 6 - 9
The problem of stress corrosion cracking (SCC), which causes sudden failure of metals and other materials subjected to stress in corrosive environment(s), has a significant impact on a number of sectors including the oil and gas industries and nuclear power production. Stress corrosion cracking reviews the fundamentals of the phenomenon as well as examining stress corrosion behaviour in specific materials and particular industries.The book is divided into four parts. Part one covers the mechanisms of SCC and hydrogen embrittlement, while the focus of part two is on methods of testing for SCC in metals. Chapters in part three each review the phenomenon with reference to a specific material, with a variety of metals, alloys and composites discussed, including steels, titanium alloys and polymer composites. In part four, the effect of SCC in various industries is examined, with chapters covering subjects such as aerospace engineering, nuclear reactors, utilities and pipelines.With its distinguished editors and international team of contributors, Stress corrosion cracking is an essential reference for engineers and designers working with metals, alloys and polymers, and will be an invaluable tool for any industries in which metallic components are exposed to tension, corrosive environments at ambient and high temperatures.

Corrosion of Magnesium Alloys

  • 1st Edition
  • March 25, 2011
  • G L Song
  • English
  • Hardback
    9 7 8 - 1 - 8 4 5 6 9 - 7 0 8 - 2
  • eBook
    9 7 8 - 0 - 8 5 7 0 9 - 1 4 1 - 3
The use of magnesium alloys is increasing in a range of applications, and their popularity is growing wherever lightweight materials are needed. This book provides a comprehensive account of the corrosion of magnesium alloys. It covers not only the corrosion performances and mechanisms of Mg alloys in conventional environments, such as sodium chloride solutions, but also looks at their corrosion behaviours in special media, like engine coolants and simulated body fluids.Part one covers fundamentals such as the corrosion electrochemistry, activity and passivity of magnesium and its alloys. Part two then considers the metallurgical effect in relation to the corrosion of magnesium alloys, including the role of micro-structure and earth-rare elements, the corrosion behaviour of magnesium-based bulk metallic glasses, and the corrosion of innovative magnesium alloys. Part three goes on to describe environmental influences on the corrosion of magnesium alloys, such as atmospheric corrosion, stress corrosion cracking, creep and fatigue behaviour, and galvanic corrosion. Finally, part four is concerned with various means of protecting magnesium alloys against corrosion through the use of aluminium electrodeposition, conversion and electrophoretic coatings, and anodisation.With its distinguished editor and team of contributors, this book is an invaluable resource for metallurgists, engineers and designers working with magnesium and its alloys, as well as professionals in the aerospace and automotive industries.