Books in Manufacturing systems engineering

1-10 of 20 results in All results

Forsthoffer’s Component Condition Monitoring

• 1st Edition
• November 16, 2018
• Michael Forsthoffer
• English
• Paperback 978-0-12-809599-7

  9 7 8 - 0 - 1 2 - 8 0 9 5 9 9 - 7
• eBook 978-0-12-809772-4

  9 7 8 - 0 - 1 2 - 8 0 9 7 7 2 - 4

Forsthoffer's Component Conditioning Monitoring Handbook is dedicated to the condition monitoring of all rotating equipment. It describes the Forsthoffer Associates method of Component Condition Monitoring (CCM) and gives the reader detailed instructions on what to monitor for each component type. The author’s easy and approachable style makes this a very practical reference for any level of technical background. This represents the latest addition to a set that includes volumes on 1. Fundamentals of Rotating Equipment; 2. Pumps; 3. Compressors; 4. Auxiliary Systems; 5. Reliability Optimization through Component Condition Monitoring and Root Cause Analysis'.

Integrated System Health Management

• 1st Edition
• May 18, 2017
• Jiuping Xu + 1 more
• English
• Paperback 978-0-12-812207-5

  9 7 8 - 0 - 1 2 - 8 1 2 2 0 7 - 5
• eBook 978-0-12-813268-5

  9 7 8 - 0 - 1 2 - 8 1 3 2 6 8 - 5

ISHM is an innovative combination of technologies and methods that offers solutions to the reliability problems caused by increased complexities in design, manufacture, use conditions, and maintenance. Its key strength is in the successful integration of reliability (quantitative estimation of successful operation or failure), "diagnosibility" (ability to determine the fault source), and maintainability (how to maintain the performance of a system in operation). It draws on engineering issues such as advanced sensor monitoring, redundancy management, probabilistic reliability theory, artificial intelligence for diagnostics and prognostics, and formal validation methods, but also "quasi-technical" techniques and disciplines such as quality assurance, systems architecture and engineering, knowledge capture, information fusion, testability and maintainability, and human factors. This groundbreaking book defines and explains this new discipline, providing frameworks and methodologies for implementation and further research. Each chapter includes experiments, numerical examples, simulations and case studies. It is the ideal guide to this crucial topic for professionals or researchers in aerospace systems, systems engineering, production engineering, and reliability engineering.

Advances in Silk Science and Technology

• 1st Edition
• April 29, 2015
• Arindam Basu
• English
• Hardback 978-1-78242-311-9

  9 7 8 - 1 - 7 8 2 4 2 - 3 1 1 - 9
• eBook 978-1-78242-324-9

  9 7 8 - 1 - 7 8 2 4 2 - 3 2 4 - 9

The remarkable properties of silk fibres have gained them a prominent place in the field of technical textiles. Advances in Silk Science and Technology explores recent developments in silk processing, properties and applications. Techniques for manufacturing spider silk are also discussed and the current and future applications of this fibre are reviewed. Part One focuses on the properties and processing of silk from both silkworms and spiders. It addresses recent advances in our understanding of the properties of silk and offers systematic coverage of the processing of silk from spinning through to finishing, as well as an analysis of quality testing for silk fibres, yarns and fabrics. Part Two then addresses important applications of silk from silkworms and spiders, and includes chapters on the use of silk in polymer matrix composites and in different kinds of biomaterial. The book concludes with a chapter on developments in the use of silk waste.

Power Electronics Applied to Industrial Systems and Transports, Volume 3

• 1st Edition
• April 24, 2015
• Nicolas Patin
• English
• Hardback 978-1-78548-002-7

  9 7 8 - 1 - 7 8 5 4 8 - 0 0 2 - 7
• eBook 978-0-08-100462-3

  9 7 8 - 0 - 0 8 - 1 0 0 4 6 2 - 3

Some power electronic converters are specifically designed to power equipment under a smoothed DC voltage. Therefore, the filtering part necessarily involves the use of auxiliary passive components (inductors and capacitors). This book deals with technical aspects such as classical separation between isolated and non-isolated power supplies, and soft switching through a special converter. It addresses the problem of regulating the output voltage of the switching power supplies in terms of modeling and obtaining transfer of SMPS functions.Power Electronics for Industry and Transport, Volume 3, offers a case study of an isolated flyback power which the complete design is presented: the active and passive components are sized based on the specifications initially set. Particular attention is given to the converter output capacitors and all the surrounding organs.

Plasma Etching Processes for Interconnect Realization in VLSI

• 1st Edition
• April 8, 2015
• Nicolas Posseme
• English
• eBook 978-0-08-100590-3

  9 7 8 - 0 - 0 8 - 1 0 0 5 9 0 - 3

This is the first of two books presenting the challenges and future prospects of plasma etching processes for microelectronics, reviewing the past, present and future issues of etching processes in order to improve the understanding of these issues through innovative solutions.This book focuses on back end of line (BEOL) for high performance device realization and presents an overview of all etch challenges for interconnect realization as well as the current etch solutions proposed in the semiconductor industry. The choice of copper/low-k interconnect architecture is one of the keys for integrated circuit performance, process manufacturability and scalability. Today, implementation of porous low-k material is mandatory in order to minimize signal propagation delay in interconnections. In this context, the traditional plasma process issues (plasma-induced damage, dimension and profile control, selectivity) and new emerging challenges (residue formation, dielectric wiggling) are critical points of research in order to control the reliability and reduce defects in interconnects. These issues and potential solutions are illustrated by the authors through different process architectures available in the semiconductor industry (metallic or organic hard mask strategies).

Power Electronics Applied to Industrial Systems and Transports, Volume 1

• 1st Edition
• March 25, 2015
• Nicolas Patin
• English
• eBook 978-0-08-100459-3

  9 7 8 - 0 - 0 8 - 1 0 0 4 5 9 - 3

Power electronics is based on the switching operating mode of semiconductor components. On this basis, the concepts of type (voltage or current) and reversibility of interconnected sources make it possible to apply a methodology for the synthesis of various types of converters.Here the author presents the major types of components available, always from a user’s point of view, with the gate drive/fire control and other auxiliary circuits that are required for their proper functioning (snubbers, for example). The different passive components (capacitors, coils and transformers) are discussed, as well as printed circuit technology, especially in the aspect of their design.This book also focuses on the importance of packaging by reviewing the electrical representation of components’ thermal models and the currently available electronics’ cooling technologies. Modeling is discussed, as well as different technological aspects used in the engineering design of an electronic power converter, useful for obtaining satisfactory performance and reliability.

Advances in Feature Based Manufacturing

• 1st Edition
• Volume 20
• October 22, 2013
• J.J. Shah + 2 more
• English
• eBook 978-1-4832-9034-8

  9 7 8 - 1 - 4 8 3 2 - 9 0 3 4 - 8

Well known researchers in all areas related to featured based manufacturing have contributed chapters to this book. Some of the chapters are surveys, while others review a specific technique. All contributions, including those from the editors, were thoroughly refereed. The goal of the book is to provide a comprehensive picture of the present stage of development of Features Technology from the point of view of applications in manufacturing. The book is aimed at several audiences. Firstly, it provides the research community with an overview of the present state-of-the-art features in manufacturing, along with references in the literature. Secondly, the book will be useful as supporting material for a graduate-level course on product modeling and realization. Finally, the book will also be valuable to industrial companies who are assessing the significance of features for their business.

System Requirements Analysis

• 2nd Edition
• September 19, 2013
• Jeffrey O. Grady
• English
• Hardback 978-0-12-417107-7

  9 7 8 - 0 - 1 2 - 4 1 7 1 0 7 - 7
• eBook 978-0-12-417130-5

  9 7 8 - 0 - 1 2 - 4 1 7 1 3 0 - 5

System Requirements Analysis gives the professional systems engineer the tools to set up a proper and effective analysis of the resources, schedules and parts needed to successfully undertake and complete any large, complex project. This fully revised text offers readers the methods for rationally breaking down a large project into a series of stepwise questions, enabling you to determine a schedule, establish what needs to be procured, how it should be obtained, and what the likely costs in dollars, manpower, and equipment will be to complete the project at hand. System Requirements Analysis is compatible with the full range of popular engineering management tools, from project management to competitive engineering to Six Sigma, and will ensure that a project gets off to a good start before it's too late to make critical planning changes. The book can be used for either self-instruction or in the classroom, offering a wealth of detail about the advantages of requirements analysis to the individual reader or the student group.

Information Control Problems in Manufacturing 2006

• 1st Edition
• October 10, 2011
• Alexandre Dolgui + 2 more
• English
• eBook 978-0-08-047848-7

  9 7 8 - 0 - 0 8 - 0 4 7 8 4 8 - 7

Information Control Problems in Manufacturing 2006 contains the Proceedings of the 12th IFAC Symposium on Information Control Problems in Manufacturing (INCOM'2006). This symposium took place in Saint Etienne, France, on May 17-19 2006.INCOM is a tri-annual event of symposia series organized by IFAC and it is promoted by the IFAC Technical Committee on Manufacturing Plant Control. The purpose of the symposium INCOM'2006 was to offer a forum to present the state-of-the-art in international research and development work, with special emphasis on the applications of optimisation methods, automation and IT technologies in the control of manufacturing plants and the entire supply chain within the enterprise. The symposium stressed the scientific challenges and issues, covering the whole product and processes life cycle, from the design through the manufacturing and maintenance, to the distribution and service.INCOM'2006 Technical Program also included a special event on Innovative Engineering Techniques in Healthcare Delivery. The application of engineering and IT methods in medicine is a rapidly growing field with many opportunities for innovation.The Proceedings are composed of 3 volumes:Volume 1 - Information Systems, Control & InteroperabilityVolume 2 - Industrial EngineeringVolume 3 - Operational Research

Tailor Welded Blanks for Advanced Manufacturing

• 1st Edition
• July 26, 2011
• B Kinsey + 1 more
• English
• Hardback 978-1-84569-704-4

  9 7 8 - 1 - 8 4 5 6 9 - 7 0 4 - 4
• eBook 978-0-85709-385-1

  9 7 8 - 0 - 8 5 7 0 9 - 3 8 5 - 1

Tailor welded blanks are metallic sheets made from different strengths, materials, and/or thicknesses pre-welded together before forming into the final component geometry. By combining various sheets into a welded blank, engineers are able to ‘tailor’ the blank so that the properties are located precisely where they are needed and cost-effective, low weight components are produced. Tailor welded blanks for advanced manufacturing examines the manufacturing of tailor welded blanks and explores their current and potential future applications.Part one investigates processing and modelling issues in tailor welded blank manufacturing. Chapters discuss weld integrity, deformation during forming and the analytical and numerical simulation modelling of tailor welded blanks for advanced manufacturing. Part two looks at the current and potential future applications of tailor welded blanks. Chapters review tailor welded blanks of lightweight metals and of advanced high-strength steel and finally discuss the uses of tailor-welded blanks in the automotive and aerospace industries.With its distinguished editors and international team of expert contributors, Tailor welded blanks for advanced manufacturing proves an invaluable resource for metal fabricators, product designers, welders, welding companies, suppliers of welding machinery and anyone working in industries that use advanced materials such as in automotive and aerospace engineering. Engineers and academics involved in manufacturing and metallurgy may also find this book a useful reference.