LIMITED OFFER
Save 50% on book bundles
Immediately download your ebook while waiting for your print delivery. No promo code needed.
Ship and Mobile Offshore Unit Automation
A Practical Guide
- 1st Edition - August 10, 2019
- Author: Henryk Pepliński
- Language: English
- Paperback ISBN:9 7 8 - 0 - 1 2 - 8 1 8 7 2 3 - 4
- eBook ISBN:9 7 8 - 0 - 1 2 - 8 1 8 7 2 4 - 1
Ship and Mobile Offshore Unit Automation: A Practical Guide: A Practical Guide gives engineers a much-needed reference on relevant standards and codes, along with practical case s… Read more
Purchase options
Institutional subscription on ScienceDirect
Request a sales quoteShip and Mobile Offshore Unit Automation: A Practical Guide: A Practical Guide gives engineers a much-needed reference on relevant standards and codes, along with practical case studies on how to use these standards on actual projects and plans. Packed with the critical procedures necessary for each phase of the project, the book also gives an outlook on trends of development for control and monitoring systems, including usage of artificial intelligence in software development and prospects for the use of autonomous vessels.Rounding out with a glossary and introductory chapter specific to the new marine engineer just starting, this book delivers a source of valuable information to help offshore engineers be better prepared to safely and efficiently design today’s offshore unit control systems.
- Helps readers understand the worldwide offshore unit regulations necessary for monitoring systems and automation installation, including ISO, IEC, IEEE, IMO, SOLAS AND MODU, ABS, DNVGL, API, NMA and NORSOK
- Presents real-world examples that apply standards
- Provides tactics on how to procure control and monitoring systems specific to the offshore industry
Offshore engineers; marine engineers; electrical engineers; graduate-level marine engineering students; engineering superintendents
1. PREAMBLE
2. TYPE OF OPERATION, ENGINE ROOM AND BRIDGE 2.1 Manned Engine Room 2.2 Unmanned Engine Rooms
3. IMO REGULATIONS 3.1 General 3.2 SOLAS regulations for Ship’s Process Control and Monitoring 3.2.1 SOLAS Regulations for ‘MANNED’ Machinery Spaces on Ships 3.2.2 SOLAS Regulations for Periodically ‘UNATTENDED’ Machinery Spaces on Ships 3.2.3 MODU Code Regulations for ‘MANNED’ Machinery Spaces on Mobile Offshore Units 3.2.4 MODU Code Regulations for ‘UNMANNED’ Machinery Spaces on Mobile Offshore Units
4. CLASSIFICATION SOCIETIES RULE REQUIREMENTS 4.1 American Bureau of Shipping (ABS) Rules for Building and Classing Steel Vessels 4.1.1 Automatic Centralised Control - ACC Notation 4.1.2 Automatic Centralised Control Unmanned - ACCU Notation 4.1.3 Automatic Bridge Centralised Control Unmanned – ABCU Notation 4.2 American Bureau of Shipping (ABS) Rules for Building and Classing Mobile Offshore Drilling Units 4.3 DNV GL Rules for Classification of Ships 4.3.1 Additional class notation ECO 4.3.2 Additional class notation E0 4.3.3 Supplementary Requirements for Drilling Units 4.3.4 Supplementary Requirements for Production and Storage Units 4.4 International Codes and Standards 4.4.1 International Electrotechnical Commission (IEC) Standards 4.4.2 Institute of Electrical and Electronics Engineers (IEEE) 4.4.3 European Union Directives 4.4.4 American Petroleum Institute (API) Recommended Practices and Standards 4.5 Coastal State Rules for Offshore Units 4.5.1 Norwegian Maritime Authority (NMD) 4.5.2 NORSOK Standards
5. DESIGNING CONTROL AND MONITORING SYSTEMS 5.1 Conceptual Design 5.2 Basic Design 5.3 Detail engineering phase 5.3.1 Drawing Numbering 5.4 Technological Documentation – Installation and Commissioning Instructions 5.5 As-built Documentation
6. PROCURING CONTROL AND MONITORING SYSTEMS 6.1 Vendor Quotations 6.2 Technical Agreement (TA) 6.3 Vessel/Offshore Unit Contract and Technical Specification 6.3.1 Scope and form of typical Technical Specification – Ship’s Processes Monitoring, Control, Regulation and Automation 6.4 Systems Functional Descriptions 6.4.1 Scope and Form of Typical System Functional Description - Sea Water Cooling System 6.4.2 Scope and Form of Typical System Functional Description - Fresh Water Generating System 6.5 Piping and Instrumentation Diagrams (P&ID) 6.5.1 Form of typical Piping and Instrumentation Diagram (P&ID) - Fuel Oil System 6.5.2 Form of typical Piping and Instrumentation (P&ID) Diagram - Fresh Water Generator 6.5.3 Mimic Diagrams 7. INTEGRATED AUTOMATION SYSTEM (IAS) 7.1 Auxiliary Control System7.2 Alarm and Monitoring System 7.3 Power Management Systems (PMS)
8. SAFETY MANAGEMENT SYSTEMS 8.1 Fire & Gas Detection (F&G) 8.1.1 F&G System Philosophy 8.1.2 Cause & Effect Diagrams 8.2 Emergency Shut Down System (ESD) 8.2.1 Emergency Shut Down Philosophy8.3 Public Address/General Alarm Systems (PA/GA)8.4 Interface with HVAC System Control
9. POSITION KEEPING SYSTEMS9.1 Dynamic Positioning System 9.2 Position Mooring Systems
10. CONTROL AND MONITORING SYSTEMS CERTIFICATION 10.1 Classification Society Certification 10.2 Statutory Certification
11. CONTROL AND MONITORING SYSTEMS INSTALLATION 11.1 Introduction 11.2 Standard Practices 11.3 Installation and Commissioning Instructions 11.4 Control and Monitoring Systems in Hazardous Areas 11.5 Electromagnetic Compatibility (EMC) considerations
12. MECHANICAL COMPLETION AND COMMISSIONING OF CONTROL AND MONITORING SYSTEMS
13. CONTROL AND MONITORING SYSTEMS MAINTENANCE
14. VESSEL/OFFSHORE UNIT CERTIFICATION 14.1 Classification Society Certification 14.2 Statutory Certification 14.3 Offshore Unit Coastal State Approval 14.3.1 Health and Safety Executive (United Kingdom) 14.3.2 Petroleum Safety Authority and the Norwegian Maritime Authority 14.4 Client and IMCA audits of control and monitoring systems
15. CONTROL AND MONITORING SYSTEMS EVOLUTION
- No. of pages: 248
- Language: English
- Edition: 1
- Published: August 10, 2019
- Imprint: Gulf Professional Publishing
- Paperback ISBN: 9780128187234
- eBook ISBN: 9780128187241
HP
Henryk Pepliński
Henryk Pepliński has more than 40 years of experience in marine and offshore electrical and control systems engineering, covering conceptual design, basic and detailed design, and systems commissioning. His experience began in European shipyards designing and constructing various types of vessels, followed by working in classification societies for plan approval and surveys of electrical and control systems. For nearly ten years, he worked as a superintendent engineer at Prosafe Offshore Ltd. (UK), gaining experience in the offshore industry on the design and modification of diesel electric semi-submersible units. Then, he worked for Seatec UK Ltd. as a superintendent engineer and planning manager for seismic vessel conversion, and finally for C&M Marine Services Ltd. as a project superintendent engineer. Henryk has also served on working groups of the International Electro-technical Commission, developing new IEC standards. He is currently an independent consultant for electrical and control engineering systems for ships, offshore units, and hybrid electrical vessels. He earned a BSc in Electrical and Control Engineering, Automation, and Measurements from Gdańsk University of Technology and a Technician Certificate in Electrical Power Engineering. Additionally, he is qualified as a lead auditor for ISO 9001 quality systems from the British Standard Institution, for IMO ISPS code from Northeast Maritime Institution, and for IMO ISM code from the Polish Register of Shipping.
Affiliations and expertise
Independent Consultant for Electrical and Control Engineering Systems for Ships and Offshore Units, Gdynia, PolandRead Ship and Mobile Offshore Unit Automation on ScienceDirect