Pervaporation, Vapour Permeation and Membrane Distillation
Principles and Applications
- 1st Edition - February 7, 2015
- Authors: Angelo Basile, Alberto Figoli, Mohamed Khayet
- Language: English
- Hardback ISBN:9 7 8 - 1 - 7 8 2 4 2 - 2 4 6 - 4
- eBook ISBN:9 7 8 - 1 - 7 8 2 4 2 - 2 5 6 - 3
Vapour permeation and membrane distillation are two emerging membrane technologies for the production of vapour as permeate, which, in addition to well-established pervaporation te… Read more
Purchase options
Institutional subscription on ScienceDirect
Request a sales quoteVapour permeation and membrane distillation are two emerging membrane technologies for the production of vapour as permeate, which, in addition to well-established pervaporation technology, are of increasing interest to academia and industry. As efficient separation and concentration processes, they have high potential for use in the energy, water, chemical, food and pharmaceutical sectors.
Part One begins by covering the fundamentals, preparation and characterization of pervaporation, before going on to outline the associated systems and applications. State of the art uses, future trends and next generation pervaporation are then discussed. Part Two then explores the preparation, characterization, systems and applications of membranes for vapour permeation, followed by modelling and the new generation of vapour permeation membranes. Finally, Part Three outlines the fundamentals of membrane distillation and its applications in integrated systems, before the book concludes with a view of the next generation.
- Explores three emerging membrane technologies that produce vapour as a permeate.
- Looks at the fundamentals, applications, state of the art uses and next generation of each technology.
- Provides an authoritative guide for chemical engineers and academic researchers interested in membrane technologies for desalination, process water/steam treatment, water purification, VOCs removal and other aspects of pollution control, industrial process chemistry, renewable energy production or separation and concentration in the food/pharmaceutical industries.
- Related titles
- List of contributors
- Woodhead Publishing Series in Energy
- Preface
- Part One. Pervaporation
- 1. Fundamentals of pervaporation
- 1.1. Introduction
- 1.2. Fundamentals of mass and heat transfer in pervaporation
- 1.3. Process and technological matters in pervaporation
- 1.4. Concluding remarks and future trends
- 2. Pervaporation membranes: preparation, characterization, and application
- 2.1. Introduction
- 2.2. Pervaporation (PV) membrane materials
- 2.3. Characterization of pervaporation membranes
- 2.4. Membrane module configurations for pervaporation
- 2.5. Membranes for pervaporation applications
- 2.6. Future trends and conclusions
- 3. Integrated systems involving pervaporation and applications
- 3.1. Introduction to integrated systems involving pervaporation
- 3.2. Applications of integrated systems involving pervaporation
- 3.3. Conclusions and future trends
- 3.4. Sources of further information and advice
- 4. Pervaporation modeling: state of the art and future trends
- 4.1. Introduction
- 4.2. Fundamentals of pervaporation modeling
- 4.3. Applications to improve the efficiency of pervaporation
- 4.4. Conclusions
- 4.5. Future trends
- 4.6. Sources of further information and advice
- 5. Next-generation pervaporation membranes: recent trends, challenges and perspectives
- 5.1. Introduction
- 5.2. Modified ceramic membranes
- 5.3. Mixed matrix membranes
- 5.4. Bio-inspired membranes and membrane synthesis approaches
- 5.5. Supported liquid (SL) membranes
- 5.6. Final remarks and future trends
- 5.7. Sources of further information
- 1. Fundamentals of pervaporation
- Part Two. Vapour permeation
- 6. Membranes for vapour permeation: preparation and characterization
- 6.1. Introduction
- 6.2. Polymer membranes
- 6.3. Zeolite membranes
- 6.4. Mixed matrix membranes
- 6.5. Future directions
- 7. Integrated systems involving membrane vapor permeation and applications
- 7.1. Introduction
- 7.2. Integrated systems involving membrane vapor separation
- 7.3. Applications of membrane vapor separation
- 7.4. Conclusion and sources of further information and advice
- 7.5. Future trends in development of membrane vapor separation
- 8. Vapour permeation modelling
- 8.1. Introduction
- 8.2. Fundamentals of vapour permeation modelling into dense polymeric membranes
- 8.3. Diffusion modelling
- 8.4. Solubility modelling
- 8.5. Vapour permeation in mixed matrix membranes and heterogeneous systems
- 8.6. Future trends
- 8.7. Conclusions
- 9. New generation vapour permeation membranes
- 9.1. Introduction
- 9.2. Current limitations of vapour permeation (VP)
- 9.3. Emerging VP membrane materials
- 9.4. Emerging membrane module configurations
- 9.5. Emerging applications for VP
- 9.6. Conclusions and future trends
- 9.7. Sources of further information
- 6. Membranes for vapour permeation: preparation and characterization
- Part Three. Membrane distillation
- 10. Fundamentals of membrane distillation
- 10.1. Introduction: nonisothermal membrane processes
- 10.2. Key characteristics of membrane distillation
- 10.3. Types of membranes and membrane module configurations for membrane distillation
- 10.4. Membrane distillation theory
- 10.5. Typical application of membrane distillation technology
- 10.6. Conclusions
- 10.7. Future trends and sources of further information and advice
- 11. Membranes used in membrane distillation: preparation and characterization
- 11.1. Introduction
- 11.2. Materials for membrane distillation (MD) membranes
- 11.3. Design and fabrication of MD membranes
- 11.4. Characterization of MD membranes
- 11.5. MD membrane modules and testing of MD membranes
- 11.6. Conclusions and future trends
- 11.7. Sources of further information and advice
- 12. Integrated systems involving membrane distillation and applications
- 12.1. Introduction
- 12.2. Applications of membrane distillation in desalination
- 12.3. Other applications of membrane distillation
- 12.4. Integrated systems involving membrane distillation
- 12.5. Conclusions and future trends
- 12.6. Sources of further information
- 13. Modelling of pore wetting in membrane distillation compared with pervaporation
- 13.1. Introduction
- 13.2. Fundamentals of membrane distillation (MD) modelling and improvement
- 13.3. Review of experimental works on MD membrane pore wetting
- 13.4. Development of a theoretical model for pore wetting in vacuum MD
- 13.5. Conclusions and future directions
- 14. Next generation membranes for membrane distillation and future prospects
- 14.1. Introduction
- 14.2. Materials for membrane distillation
- 14.3. Emerging module configurations for membrane distillation
- 14.4. Conclusions and future trends
- 10. Fundamentals of membrane distillation
- Index
- No. of pages: 480
- Language: English
- Edition: 1
- Published: February 7, 2015
- Imprint: Woodhead Publishing
- Hardback ISBN: 9781782422464
- eBook ISBN: 9781782422563
AB
Angelo Basile
Angelo Basile, a Chemical Engineer with a Ph.D. in Technical Physics, was a senior Researcher at the ITM-CNR as a responsible for the research related to both ultra-pure hydrogen production and CO2 capture using Pd-based Membrane Reactors. He is a reviewer for 165 int. journals, an editor/author of more than 50 scientific books and 140 chapters on international books on membrane science and technology; with various patens (7 Italian, 2 European, and 1 worldwide). He is a referee of 1more than 150 international scientific journals and a Member of the Editorial Board of more than 20 of them. Basile is also an associate editor of the: Int. J. Hydrogen Energy; Asia-Pacific Journal of Chemical Eng.; journal Frontiers in Membrane Science and Technology; and co-Editor-in-chief of the Int. J. Membrane Science & Technol.
AF
Alberto Figoli
He also had international experience in industrial research labs: about 1 year (1996) at Quest International Nederland B.V. (ICI), Process Research Group, Naarden (The Netherlands) on “Setting of a pilot plant for aromatic compounds extraction using the pervaporation (PV) membrane technology”; Secondment in 2010 and 2011 at GVS, SpA, Bologna, within the EU project “Implementation of Membrane Technology to Industry” (IMETI) on “Preparation and Characterisation of hybrid membranes for VOCs removal”.
He was granted for the “Short Term Mobility Programme” by CNR, in 2004 and 2005, at the “Environmental Protection Agency of United States (USEPA)”, Sustainable Technology Division, Cincinnati (USA) on “Volatile Organic Compounds (VOCs) and aroma removal using a novel asymmetric membrane by pervaporation” nell’ambito dello “Short Term Mobility Programme” funded CNR.
He is responsible and involved in various National and International projects. He is also responsible, within the CNR organisation, for two research lines on membrane preparation and characterisation and on pervaporation (PV) applications.
He is author of more than 60 research papers in peer reviewed journals, several book chapters, a book, two patents and many oral presentations (also as invited lecture) in National and International Conferences and Workshops.
MK
Mohamed Khayet
Dr. Mohamed Khayet is director of the University Complutense of Madrid (UCM) Research Group “Membranes and Renewable Energies (MER)” and Professor (Applied Physics Area) at the Faculty of Physical Sciences (UCM) (Department of Structure of Matter, Thermal Physics and Electronics). He got his Ph.D. (1997) in Physical Sciences and he realized various research stays in various international institutions (Industrial Membrane Research Institute in Ottawa, Canada; Institute of Nuclear Chemistry and Technology in Warsaw, Poland; Centre for Clean Water Technologies at the University of Nottingham in UK; Singapore Membrane Technology Centre and Nanyang Technological University in Singapore, Yale University in New Haven, USA; University of California Berkeley in USA, etc.). Among other grants, he got the Fulbright Grant (2019). He is an expert in the field of membrane science, nanotechnology and renewable energies. He has coordinated various national and international projects (over 20) funded by different institutions (European Union, Middle East Desalination Research Centre, Spanish Ministries; Companies such as Abengoa, etc.) on membranes and modules engineering for different separation processes. He published over 200 papers in international journals, filed 6 International Patents, published 5 books and various book chapters in the field of membrane science and related technology. Among other recognitions, he received the Prince Sultan Bin Abdulaziz International Prize for Water (PSIPW) in 2012. He edited various special issues in international journals such as Desalination, Polymers and Membranes. He acted as Editor of the international Journal “Desalination” (2018-2022) and served as associated editor of different journals. Currently, he is member of the Editorial Board of various journals related with water treatment, renewable energy, nanotechnology, membrane science and separation processes.
- Google Scholar: https://scholar.google.com/citations?user=H_lnjFkAAAAJ&hl=en
- Scopus: https://www.scopus.com/authid/detail.uri?authorId=56517090400
- ORCID ID: https://orcid.org/0000-0002-5117-2975