Metal Oxide-Based Nanostructured Electrocatalysts for Fuel Cells, Electrolyzers, and Metal-Air Batteries
- 1st Edition - February 22, 2021
- Latest edition
- Editors: Teko Napporn, Yaovi Holade
- Language: English
- Paperback ISBN:9 7 8 - 0 - 1 2 - 8 1 8 4 9 6 - 7
- eBook ISBN:9 7 8 - 0 - 1 2 - 8 1 8 4 9 7 - 4
Metal Oxide-Based Nanostructured Electrocatalysts for Fuel Cells, Electrolyzers, and Metal-Air Batteries is a comprehensive book summarizing the recent overview of these new mater… Read more
Metal Oxide-Based Nanostructured Electrocatalysts for Fuel Cells, Electrolyzers, and Metal-Air Batteries is a comprehensive book summarizing the recent overview of these new materials developed to date. The book is motivated by research that focuses on the reduction of noble metal content in catalysts to reduce the cost associated to the entire system. Metal oxides gained significant interest in heterogeneous catalysis for basic research and industrial deployment.
Metal Oxide-Based Nanostructured Electrocatalysts for Fuel Cells, Electrolyzers, and Metal-Air Batteries puts these opportunities and challenges into a broad context, discusses the recent researches and technological advances, and finally provides several pathways and guidelines that could inspire the development of ground-breaking electrochemical devices for energy production or storage. Its primary focus is how materials development is an important approach to produce electricity for key applications such as automotive and industrial.
The book is appropriate for those working in academia and R&D in the disciplines of materials science, chemistry, electrochemistry, and engineering.
- Includes key aspects of materials design to improve the performance of electrode materials for energy conversion and storage device applications
- Reviews emerging metal oxide materials for hydrogen production, hydrogen oxidation, oxygen reduction and oxygen evolution
- Discusses metal oxide electrocatalysts for water-splitting, metal-air batteries, electrolyzer, and fuel cell applications
Materials Scientists and Engineers, Materials Chemists, Chemical Engineers, and those working in Energy in academia and R&D
1 Bridging the two ends: Designing materials to bridge electronic conductivity and catalytic activity in an electrochemical energy converter
Yaovi Holade, Teko W. Napporn, and Boniface K. Kokoh
2 Metal oxide-based electrocatalysts for low-temperature electrochemical production and oxidation of hydrogen (HER and HOR)
Sarra Knani, Nolwenn Mayet, Boniface K. Kokoh, Yaovi Holade, and Teko W. Napporn
3 Oxygen reduction reaction (ORR) in acidic media with nanostructured metal oxide-based electrocatalysts
Akimitsu Ishihara, Yoshiyuki Yamamoto, Osamu Sugino, and Ken-ichiro Ota
4 Oxygen evolution reaction (OER) at nanostructured metal oxide electrocatalysts in water electrolyzers
Yoshiyuki Kuroda and Shigenori Mitsushima
5 Electro-catalysts for oxygen electrodes in seawater electrolyzers (OER) and reversible electrolyzers (OER/ORR)
Sören Dresp and Peter Strasser
6 Metal oxide catalysts for photoelectrochemical water splitting
Srabanti Ghosh and Paramita Hajra
7 Bifunctional OER-ORR electrodes for metal-air batteries
Chunzhen Yang and Zhongfei Liu
8 Challenge in metal-air batteries: From the design to the performance of metal oxide-based electrocatalysts
Toshinari Koketsu, Peter Strasser, Yunhui Huang, and Jiwei Ma
9 Metal oxides for high-temperature electrolyzers
Vanja Subotic' and Teko W. Napporn
10 Nanostructured metal oxides for high-performance solid oxide fuel cells (SOFCs)
Vanja Subotic' and Teko W. Napporn
Yaovi Holade, Teko W. Napporn, and Boniface K. Kokoh
2 Metal oxide-based electrocatalysts for low-temperature electrochemical production and oxidation of hydrogen (HER and HOR)
Sarra Knani, Nolwenn Mayet, Boniface K. Kokoh, Yaovi Holade, and Teko W. Napporn
3 Oxygen reduction reaction (ORR) in acidic media with nanostructured metal oxide-based electrocatalysts
Akimitsu Ishihara, Yoshiyuki Yamamoto, Osamu Sugino, and Ken-ichiro Ota
4 Oxygen evolution reaction (OER) at nanostructured metal oxide electrocatalysts in water electrolyzers
Yoshiyuki Kuroda and Shigenori Mitsushima
5 Electro-catalysts for oxygen electrodes in seawater electrolyzers (OER) and reversible electrolyzers (OER/ORR)
Sören Dresp and Peter Strasser
6 Metal oxide catalysts for photoelectrochemical water splitting
Srabanti Ghosh and Paramita Hajra
7 Bifunctional OER-ORR electrodes for metal-air batteries
Chunzhen Yang and Zhongfei Liu
8 Challenge in metal-air batteries: From the design to the performance of metal oxide-based electrocatalysts
Toshinari Koketsu, Peter Strasser, Yunhui Huang, and Jiwei Ma
9 Metal oxides for high-temperature electrolyzers
Vanja Subotic' and Teko W. Napporn
10 Nanostructured metal oxides for high-performance solid oxide fuel cells (SOFCs)
Vanja Subotic' and Teko W. Napporn
- Edition: 1
- Latest edition
- Published: February 22, 2021
- Language: English
TN
Teko Napporn
Dr. Teko W. Napporn, is an electrochemist and a tenure Researcher of French National Center of Scientific Research (CNRS) at Institut de Chimie des Milieux et Matériaux de Poitiers IC2MP (University of Poitiers, France) where he is currently co-leader of SAMCat research team. He graduated in 1997 from University of Poitiers with a PhD in Physical, Theoretical and Analytical Chemistry. After he joined as post-doctoral fellow the Electrocatalysis Group of the Chemistry Institute of Sao Carlos at University of Sao Paulo (Brazil), and later in 1999, the Ecole Polytechnique de Montreal (Canada) as research associate. There, he had studied and developed the single chamber SOFC system in collaboration with Hydro-Quebec. Since 2008 he got a tenure position at CNRS for developing novel nanomaterials for electrocatalysis especially for application in energy conversion and storage systems. He participated/managed various projects in the field and co-authored 105 + articles and 11 book chapters. Since 2015, he is involved as Adjunct professor at the Institute of Advanced Science of Yokohama National University (Japan) to design innovative materials for fuel cell and water electrolyzer.
Affiliations and expertise
Institut de Chimie des Milieux et Matériaux de Poitiers, University of Poitiers, FranceYH
Yaovi Holade
Dr. Yaovi Holade (PhD, MRSC), born in 1987, is a young electrochemist, and holds a permanent Assistant Professor position since September 2016 at ENS Chimie Montpellier (ENSCM, France) where he teaches electrochemical sciences and conducts his researches at European Institute of Membranes of Montpellier (IEM, France). He is currently the Head of the internship office at ENSCM. He graduated from University of Poitiers (Poitiers, France) with a Master in Catalysis and Environment in 2012 (Department of Chemistry) and a PhD (June 2015) in Chemistry within the main field of Electrocatalysis under the supervision of Prof. Boniface K. Kokoh and Dr. Karine Servat. His six months Master II training on palladium-based electrocatalysts resulted into 2 high-impact articles. Then his 3 years PhD research in the multidisciplinary fields of electrocatalysis, nanomaterials, and (bio)fuel cells led to 18 research-articles, 1 review-article, 2 book-chapters, and 2 best PhD Thesis awards from University of Poitiers in 2015 and from the Physical Chemistry Division of French Chemical and Physical Societies (SCF/SFP) in 2016. He co-authored 40+ articles and book-chapters covering the large fields of electrocatalysis, nanomaterials, and bioelectrochemistry. He was post-doctoral researcher in the research group of Prof. Shelley D. Minteer at the University of Utah (UT, USA) from December 2015 to August 2016. He has gained strong experience in the development of synthesis methods for nanostructured materials and their deployment in electrochemical applications as electrode materials (fuel cells, electrolyzers, etc.). His current researches integrate methods of physical and electrochemical sciences with a new point of view and approach to interrogate the intricate relationship between a given material and its electrochemistry toward the ultimate goal of not only enabling the development of practical devices but also and ultimately, unraveling the guiding fundamental principles underlying the performance of a particular electrode material.
Affiliations and expertise
Institut Europeen des Membranes, IEM UMR 5635, Univ Montpellier, ENSCM, CNRS, Montpellier, FranceRead Metal Oxide-Based Nanostructured Electrocatalysts for Fuel Cells, Electrolyzers, and Metal-Air Batteries on ScienceDirect