Mechanical Design
Theory and Applications
- 3rd Edition - June 29, 2021
- Imprint: Butterworth-Heinemann
- Author: P.R.N. Childs
- Language: English
- Paperback ISBN:9 7 8 - 0 - 1 2 - 8 2 1 1 0 2 - 1
- eBook ISBN:9 7 8 - 0 - 1 2 - 8 2 1 1 0 3 - 8
Mechanical Design: Theory and Applications, Third Edition introduces the design and selection of common mechanical engineering components and machine elements, hence providing… Read more
Purchase options
Institutional subscription on ScienceDirect
Request a sales quoteMechanical Design: Theory and Applications, Third Edition introduces the design and selection of common mechanical engineering components and machine elements, hence providing the foundational "building blocks" engineers needs to practice their art. In this book, readers will learn how to develop detailed mechanical design skills in the areas of bearings, shafts, gears, seals, belt and chain drives, clutches and brakes, and springs and fasteners. Where standard components are available from manufacturers, the steps necessary for their specification and selection are thoroughly developed.
Descriptive and illustrative information is used to introduce principles, individual components, and the detailed methods and calculations that are necessary to specify and design or select a component. As well as thorough descriptions of methodologies, this book also provides a wealth of valuable reference information on codes and regulations.
- Presents new material on key topics, including actuators for robotics, alternative design methodologies, and practical engineering tolerancing
- Clearly explains best practice for design decision-making
- Provides end-of-chapter case studies that tie theory and methods together
- Includes up-to-date references on all standards relevant to mechanical design, including ASNI, ASME, BSI, AGMA, DIN and ISO
Postgraduate students and researchers working in mechanical engineering, automotive and motorsport engineering, and robotics
Industrial design engineers; product designers
Industrial design engineers; product designers
- Cover image
- Title page
- Table of Contents
- Copyright
- About the Author
- Preface
- Acknowledgments
- 1. Design
- Abstract
- 1.1 Introduction
- 1.2 The Design Process
- 1.3 Design Models
- 1.4 Design Optimization
- 1.5 Design Reviews
- 1.6 The Technology Base
- 1.7 Conclusion
- References
- Standards
- Web Sites
- Nomenclature
- Worksheet
- 2. Journal Bearings
- Abstract
- 2.1 Introduction
- 2.2 Sliding Bearings
- 2.3 Design of Boundary-Lubricated Bearings
- 2.4 Design of Full-Film Hydrodynamic Bearings
- 2.5 Conclusion
- References
- Standards
- Web Sites
- Nomenclature
- Worksheet
- Answers
- 3. Rolling Element Bearings
- Abstract
- 3.1 Introduction
- 3.2 Bearing Life and Selection
- 3.3 Bearing Installation
- 3.4 Conclusion
- References
- Standards
- Web Sites
- Nomenclature
- Worksheet
- Answers
- 4. Shafts
- Abstract
- 4.1 Introduction
- 4.2 Shaft–Hub Connection
- 4.3 Shaft–Shaft Connection—Couplings
- 4.4 Critical Speeds and Shaft Deflection
- 4.5 Analysis of Transmission Shafting
- 4.6 Detailed Design Case Study
- 4.7 Conclusion
- References
- Standards
- Web Sites
- Nomenclature
- Worksheet
- Answers
- 5. Gears
- Abstract
- 5.1 Introduction
- 5.2 Construction of Gear Tooth Profiles
- 5.3 Gear Trains
- 5.4 Tooth Systems
- 5.5 Force Analysis
- 5.6 Simple Gear Selection Procedure
- 5.7 Condition Monitoring
- 5.8 Conclusion
- References
- Standards
- Web Sites
- Nomenclature
- Worksheet
- Answers
- 6. Spur and Helical Gear Stressing
- Abstract
- 6.1 Introduction
- 6.2 Failure Due to Contact Stresses
- 6.3 AGMA Equations for Bending and Contact Stress
- 6.4 Gear Selection Procedure
- 6.5 Conclusion
- References
- Standards
- Web Sites
- Nomenclature
- Worksheet
- Answers
- 7. Belt and Chain Drives
- Abstract
- 7.1 Introduction
- 7.2 Belt Drives
- 7.3 Chain drives
- 7.4 Conclusion
- References
- Standards
- Web Sites
- Nomenclature
- Worksheet
- Answers
- 8. Clutches and Brakes
- Abstract
- 8.1 Introduction
- 8.2 Clutches
- 8.3 Brakes
- 8.4 Conclusion
- References
- Standards
- Web Sites
- Nomenclature
- Worksheet
- Answers
- 9. Springs
- Abstract
- 9.1 Introduction
- 9.2 Helical Compression Springs
- 9.3 Helical Extension Springs
- 9.4 Helical Torsion Springs
- 9.5 Leaf Springs
- 9.6 Belleville Spring Washers
- 9.7 Conclusion
- References
- Standards
- Web Sites
- Nomenclature
- Worksheet
- Answers
- 10. Fastening and Power Screws
- Abstract
- 10.1 Introduction to Permanent and Nonpermanent Fastening
- 10.2 Threaded Fasteners
- 10.3 Power Screws
- 10.4 Rivets
- 10.5 Adhesives
- 10.6 Welding
- 10.7 Snap Fasteners
- 10.8 Conclusion
- References
- Standards
- Web Sites
- Nomenclature
- Worksheet
- Answers
- 11. Tolerancing and Precision Engineering
- Abstract
- 11.1 Introduction
- 11.2 Component Tolerances
- 11.3 Statistical Tolerancing
- 11.4 Precision Engineering and Case Studies
- 11.5 Conclusion
- References
- Standards
- Nomenclature
- Worksheet
- Answers
- Index
- Edition: 3
- Published: June 29, 2021
- No. of pages (Paperback): 474
- No. of pages (eBook): 474
- Imprint: Butterworth-Heinemann
- Language: English
- Paperback ISBN: 9780128211021
- eBook ISBN: 9780128211038
PC
P.R.N. Childs
Brief Author Bio: Peter Childs is Head of the Dyson School of Design Engineering and the Professorial Lead in Engineering Design at Imperial College London. His general interests include: creativity tools and innovation; design process and design rationale; fluid flow and heat transfer, particularly rotating flow; sustainable energy component, concept and system design; robotics. Prior to his current post at Imperial he was director of the Rolls-Royce supported University Technology Centre for Aero-Thermal Systems, director of InQbate and professor at the University of Sussex. He has contributed to over 180 refereed journal and conference papers, and several books including the Handbook on Mechanical Design Engineering (Elsevier, 2013, 2019) as well as co-authoring books on rural urban migration, inclusive sports and sports technology. He has been principal or co-investigator on contracts totalling over £80 million. His roles at Imperial include joint course director for the Innovation Design Engineering double master degree run jointly by Imperial and the Royal College of Art, and Design Lead for the Manufacturing Futures Lab. He is Editor of the Journal of Power and Energy and Founder Director and Chief Scientific Officer at QBot Ltd.
Affiliations and expertise
Head of the Dyson School of Engineering Design, Imperial College London, UKRead Mechanical Design on ScienceDirect