Mechanical Behaviour of Materials
Proceedings of the Fourth International Conference, Stockholm, Sweden, 15-19 August 1983
- 1st Edition - October 8, 2013
- Imprint: Pergamon
- Editor: J. Carlsson
- Language: English
- eBook ISBN:9 7 8 - 1 - 4 8 3 2 - 8 3 7 2 - 2
Mechanical Behaviour of Materials — IV is a collection of papers dealing with engineering issues of the strength of materials, solid mechanics, and materials science. One paper… Read more
Purchase options
Mechanical Behaviour of Materials — IV is a collection of papers dealing with engineering issues of the strength of materials, solid mechanics, and materials science. One paper analyzes the growth of subcritical cracks subject to cyclic stresses as a result of fatigue or material microstructure. Another paper shows the retention of maximum strength of some aircraft parts which have been in service for up to 20 years, and subjected to stress and exposure cycles, due in part to the usage of high quality surface paint. One paper discusses the regularities in deformation and failure of structural steels and alloys at cryogenic temperatures under conditions of static and cyclic (low-cycle) loading. The paper shows that the type of stress is evident in materials which lose their plastic properties as the temperature decreases. The materials parameters that affect plastic instability and sheet formability are strain hardening, strain rate sensitivity, and plastic anisotrophy. Experiments indicate the importance of stress state, large strains, and path changes on the strain hardening response and subsequent stability of the material. Another paper describes the relationship between microstructure and hydrogen embrittlement in aspects of fracture mechanics, as well as the correlation between hydrogen embrittlement and carbon equivalent. The collection can prove valuable for structural engineers, materials engineers, design engineers, and investigators involved in the study of the strength of materials.
Contents Volume 2
Preface
Invited Papers
Materials Aspects of Crack Tip Yielding and Subcritical Crack Growth in Engineering Alloys
Modern Manufacturing and Performance Concepts of Composite Materials (Abstract Only)
Comparison Between Experimental and Theoretical Forming Limit Diagrams
Limits to Formability in Rate-Sensitive Metal Sheets
Constrained Grain Boundary Cavitation in a Creeping Body Containing a Macroscopic Crack
High Temperature Deformation and Failure of Welded Joints
Simplified Design Procedures for Composite Materials
Mechanical Properties of Structural Materials at Low Temperatures with Reference to the Type of Stressed State and Mode of Loading
Factors Affecting Plastic Instability and Sheet Formability
Theme I: High Temperature Deformation and Failure
Constitutive Laws of 316 Stainless Steel in High Temperature Creep by Biaxial Experiments
Constitutive Relationships for Creep-Fatigue in High-Temperature Materials
High Temperature Low Cycle Fatigue of Two Austenitic Stainless Steels — A Comparison Between Mechanical Properties and Microstructure
Creep Modeling of Textured Zircaloy Under Biaxial Stressing
Thermal Fatigue Test by Direct Passage Method of Large Electric Current on Stainless Steels
The Predictive Capability of Three High Temperature Low Cycle Fatigue Models in the Alloy IN-738
Reheat Cracking During Stress Relief Annealing — A Numerical Approach
Influence of Prestress on the Yield Surface of the Cast Nickel Superalloy Mar-M002 at Elevated Temperature
Fatigue Crack Propagation in Stainless Steel Subjected to Repeated Thermal Shock
A Study of Creep Behavior of Welded Joint
Effect of Cyclic Strain on Cumulative Fatigue Damage of Type 304 Stainless Steel at High Temperature
The Effects of the Wavy Grain Boundaries on the Creep Fracture Behavior in UDIMET-700 Alloy
The Non-Isothermal Fatigue Tests and Analysis
Thermal Fatigue Behaviour of Mar-M509 Superalloy
Thermal Fatigue of a Thermally Unstable Alloy
Oxide Wedging Effects on Near Threshold Fatigue Crack Growth at Elevated Temperature (Abstract Only)
Creep in Welded Joints in Ferritic and Martensitic Steels
Thermal Stresses, Plate Motion and Hot Cracking in Butt-Welding
Relative Importance of Initiation and Propagation Phases on the High Temperature Low Cycle Fatigue Behaviour of a Nickel Superalloy
Influence of State of Stress on Creep Failure of 21/4%Cr1% Mo Steel
The Use of Fracture Mechanics Approach to Evaluate the Reliability of a Nozzle Weld Assembly in Power Plant Vessels (Abstract Only)
The Effect of Ordering on the High Temperature Deformation of Nickel Based Alloys
Influence of Grain Orientations on the Mechanical Properties and Fracture Characteristics in a Directionally Solidified Superalloy
Influence of Cyclic Loading on Crack Growth of a 1/2%Cr 1/2%Mo 1/4%V Steel
Damage Mechanics Applied to High Temperature Fatigue
Generalization of Mindlin's Kinematical Plate Theory for Anisotropic Materials
Experimental Creep Mechanism Maps for Metals
The Influence of Multiaxiality of Stress and Environmental Induced Degradation on the Creep Behaviour of Alloy 800H Tubular Components
Theme II: Mechanical Properties of Surface Coated Materials
On the Contact Fatigue Resistance of the Cobalt Alloy Coating and its Micromechanisms
Tribological Characteristics of Steel 20Cr2Ni4 After Complex Thermochemical Treatment
Synthesis and Testing of Foam-Filled FRP Shell for Static Crushing and Impact
Fretting in Electrical Contacts
Comparing the Abrasive and Erosive Resistance of some Flame Sprayed Coatings and Nitrided Steel Surfaces
The Surface Layer Fatigue Failure of Heat-Resisting Steels at High Temperature and the Protective Effect of Alloy Coatings
Creep Properties of Electron Beam Evaporated Ni-Al2O3 Condensates (Abstract Only)
Diffusion Barriers Used to Improve Structural Stability and Mechanical Properties of W Fibre-Ni Matrix Composites at Elevated Temperatures
Mechanical Properties of Plasma Sprayed and Posttreated FeCrAlY-Coatings
The Cavitation Erosion of Coated and Surface Treated Steels
Theme III: Design with Fibre Reinforced (Composite) Materials
A Correlation Between Fracture Energy and Fracture Morphology in Mixed-Mode Fracture of Composites
Optimum Design of Laminated Plates with Fibre Reinforced (Composite) Materials (Abstract Only)
Mechanical Properties of Bamboo-Mesh Reinforced Cement Composites
The Influence of Microstructure on Composite Strengthening
Microstress Redistribution in Fibre-Reinforced Composites Due to Time-Dependent Processes
Material Design of Fibrous Laminated Composites with Required Flexural Stiffness
Influence of Matrix Resin on Ultimate Strength of Unidirectional CFRP
Effect of Fiber Orientation on Stable Crack Growth in FRP
Nondestructive Evaluation of Composite Materials — A Design Philosophy
Creep Behaviour of Reinforced and Non-Reinforced Resins
Interfacial Failure in Steel Fiber Reinforced Polystyrene Impregnated Mortar
The Effect of Extreme Temperatures on the Elastic Properties and Fracture Behavior of Graphite/Polyimide Composites
Deformation and Failure of Thin-Walled Filament Wound GRP Tubes Subjected to Transverse Indentation
Reliability-Based Fatigue-Proof Design of Composite Materials (Extended Abstract Only)
Residual Strength Degradation Model for Glass/Polyester Laminates Under Repeated Tension and Compression Loadings
On the Use of the Three Point Bend and Compact Tension Specimens to Measure Fracture Toughness of Composite Laminates
Acoustic Emission from Filament Wound Pipes Under Long-Term Loading Conditions
A Study on Interlaminar Shear Strength of Composites
Toughness of Thin Slabs Under Flexural or Impact Loading
Measurement of Interfacial Shear Strength in Graphite Fiber/Aluminum Matrix Composites
Mechanical Behavior of a Short Fiber Composite
Delamination and Transverse Fracture in Graphite/Epoxy Materials
Contents of Volume 1
Theme IV: Sheet Forming of High-Strength Materials
Computer-Aided Prediction of Sheet Metal Manufacturing Processes and its Experimental Verification
On the Law of Strength of Dual-Phase Plain Carbon Steels as Natural Composite Materials
Material Inhomogeneity and Surface Roughening During Plastic Deformation
The Influence of Microstructure and Texture on the Forming Properties of a Dual Phase Al-Killed Steel (Abstract Only)
Localized Flow (Shear Bands) in Al and Al-3%Mg Alloy (Abstract Only)
Instability in Plastic Bending of Thin Sheet Metal
Test Methods for Formability of Hot Rolled Steel Sheets
Analysis of Plastic Instability in Sheet-Metal Forming
The Effect of Non-Linear Strain Paths on the Plastic Properties of Steels (Abstract Only)
Forming Limits of Titanium Sheets
Effect of Matrix and Second Phase on the Maximum Uniform Strain of Metals
Some Problems About Strain Hardening Exponent of Metals
On the Prediction of Forming Limit Diagrams for Anisotropie Sheets
A Materials Model for Strain Softening with Applications in Modeling Strain Localization
Relationship Between Structure and Mechanical Behaviour of Al-10wt%Cu Alloys Produced by Rheocasting
Theme V: Material Aspects of Fracture Mechanics in Engineering Practice
Direct Observations of the Micromechanisms of Fracture in Polymeric Solids Using the Scanning Electron Microscope
Fatigue Crack Propagation in Viscous Environments
An Investigation of Void Distribution in Necking Region and Tensile Fracture Characteristics of Dual-Phase Steel 1010
Fracture Toughness and X-Ray Diffraction Observation of Fracture Surface of Ductile Cast Iron
Stress and Strain Fields Around Inclusions in a Plastically Deforming Matrix
The Use of J-Resistance Curves to Characterize the Effects of Microstructure, Strength and Irradiation on Fracture Micromechanisms in Nuclear Reactor Pressure Tubes
Standard Method of Test for Elastic-Plastic Fracture Toughness JIC Recommended in Japan
Effect of Crack Closure on Near-Threshold Crack Growth Behaviour in a High Strength Al-Alloy Up to Ultrasonic Frequencies
Creep Crack Initiation and Growth in an Austenitic Stainless Steel
Flaws, Fracture Mechanisms and Hertzian Cracks in Brittle Solids
On the Weibull Model of Cleavage Fracture
The Assessment of the Fracture Toughness of Fe-Ni-C Alloys with Austenitic and Austenite-Martensite Structures
Fatigue Crack Growth Retardation in an Ultra High Carbon Steel
Stretch Zone, Ductility and Toughness Studies in the Transition Region of 1045 Steel
Study on Fracture Process of Nitrided Cases of Steel 30CrMo with Acoustic Emission Technique
Finite Element Analysis of Fatigue Crack Closure in Compact Specimen
The Effect of Intermittent Rest Periods at Elevated Temperatures on the Fatigue Properties of 4140 Steel
Failure Predictions Based on Tearing Instability and Limit Load — A Parameter Study
Fatigue Crack Propagation and Threshold of Type 304 L Austenitic Stainless Steel
The Effects of the Size of the Second Phase Particles on the Mechanical Properties of a Low Alloy Steel
Fracture Toughness of Cast Iron
Fracture Toughness of Tungsten-Free TiC- and (Ti)C,N-Base Hard Alloys and its Relation to the Microstructure
Experimental Determination of Hole Initiation Criteria at Inclusions in Low Alloy Steel and Spheroidal Graphite Cast Iron
A Computer Simulation of Ductile Behaviour in Two Steels of Medium and Low Strength
A Critical Assessment of the Threshold Stress Intensity Factor
A Comparison of JIc, Stretched Zone Size and Crack Opening Displacement in a Ferritic Steel
Assessment of Ductile Fracture Resistance Based on an Engineering Approach
Fatigue Crack Growth at High Strain Amplitudes
Comparative Study of Crack Resistance Properties of Three Differently Alloyed HSLA Steels
New Approaches in Fracture Mechanics
On Crack Problems Related to Welding Residual Stress Fields in Linear Elastic Fracture Mechanics
A Distributed Damage Approach to Combined Bending and Axial Loading of Rock Beams
Three Methods for Determining the J-R Curve Directly from a Load Displacement Record
An Elastic-Plastic Analysis of Relationships Between KI, J, and CTOD
Stress Hold Time, Stress Rate and Frequency Effects on Fracture Under Environment and Under High Temperature Creep, Fatigue and Creep-Fatigue Interaction Conditions
Creep, Fatigue and Environment Interactions in Low Alloy Steels
Phenomenon and Applications of the Recovery-Induced Thermal Deformation of Thermoplastics
Thermal Fatigue of Structural Materials with Regard to Structural Stresses
High-Temperature Behaviour of Steels with Phase Transformation and the Simulation of Quenching and Welding Processes
Production and Mechanical Property of Clad-Metals Laminated with Particle Reinforced Composite Metal and Ceramic Powder
Fracture Behaviour of Pressure Vessel Shells Plated with Anticorrosive Cladding
Delayed Failure of Inelastic Composites
Finite Element Analysis of Thermal Residual Stresses in Antisymmetrically Laminated Composites
A Three-Dimensional Ductile Damage Model Applied to Deep-Drawing Forming Limits
On the Law of Mixture in Dual Phase Steels
Thermoactivation Analysis of Fatigue Crack Growth of Aluminium Alloys
Tensile Behavior and Fracture Characteristics of a Dual-Phase Fe/Mn/C Steel
Application of the J-Integral Concept to Microscopic Fracture Mechanics
Quasi-Static and Impact Fracture Toughness of 5140 H Steel After Different Thermal Treatments
The Influence of Microstructure and Temperature on Static and Dynamic Fracture Initiation in Heat Resistant Steel
Effect of Sulfur Content on Fracture Behaviour of Ni-Cr-Mo-V Steel
Micromechanics of Fracture in Microalloyed Steel
An Interpretation of Scatter and Thickness Effect of Fracture Toughness in the Transition Region
The Determination of S-N Curves with Pre-Cracked Specimens
Influence ot Creep Voids Growth on Motion of a Macro-Crack
Mechanical Properties of Surface Coated Materials
Press Forming Problems of HSLA Steel Sheets
Mechanical Behavior of Energetic Polymeric Materials
Anelastic Creep Behaviour of RR-58 Aluminium Alloy at 180°C
Behaviour of Materials at High Temperatures
Reliability-Based Fatigue-Proof Design of Composite Materials
Mechanical Properties of Magnetic Composites
The Effect of Non-Linear Strain Paths on the Plastic Properties of Steels
Relationship Between Microstructure and Hydrogen Embrittlement in Fracture Mechanics Aspect
Author Index
Subject Index
- Edition: 1
- Published: October 8, 2013
- Imprint: Pergamon
- Language: English
Read Mechanical Behaviour of Materials on ScienceDirect