Skip to main content
Elsevier

Hydraulic Rubber Dam

An Effective Water Management Technology

  • 1st Edition - November 30, 2018
  • Latest edition
  • Editors: Sabu Thomas, Ajay Vasudeo Rane, Abitha VK, Krishnan Kanny, Aastha Dutta
  • Language: English

Approx.132… Read more

Back to School

Start strong. Study with purpose.

Save up to 25% on trusted learning resources

Shop now

Description

Approx.132 pages

Key features

  • Demonstrates the proper use of rubber dams in water management, especially in flood prevention and water conservation during drought
  • Includes guidance on the materials engineering of rubber and technical fabrics involved in the construction of dams, bonding and anchoring systems, and inflation and deflation mechanisms
  • Presents thorough coverage of modelling and stress analysis, along with lifecycle assessment of inflatable rubber dams

Readership

Consultants, engineers and researchers in the fields of materials science and engineering of rubber, particularly as applied to water resource management such as irrigation, flood control, and water storage

Table of contents

1. Rubber Dam - An Introduction

2. Water Conservation Technologies

3. Raw Materials - Rubber Dam

4. Manufacturing Process - Reinforced Rubber Sheet for Rubber Dam

5. Bonding and Anchoring System for Rubber Dam

6. Inflation and Deflation of Rubber Dam

7. Life Cycle Assessment of Rubber Dam

Product details

  • Edition: 1
  • Latest edition
  • Published: November 30, 2018
  • Language: English

About the editors

ST

Sabu Thomas

Professor Sabu Thomas is currently an Emeritus Professor of Mahatma Gandhi University, Kottayam, Kerala, India. He was the former Vice Chancellor of Mahatma Gandhi University. He is a Senior Professor of Christ University, Bangalore, India. He is also a visiting Professor at the Department of Chemical Sciences, University of Johannesburg, Johannesburg, South Africa, Department of Chemical Engineering, Faculty of Engineering, Chulalongkorn University, Bangkok, Thailand, and an Adjunct Faculty in the Department of Polymer and Process Engineering, IIT Roorkee, India. He is the Chairman of the TrEST Research Park, Trivandrum, Kerala, India. The H index of Professor Thomas is 163 and he has more than 133,000 citations

Affiliations and expertise
Emeritus Professor, School of Chemical Sciences, and Director, International and Inter-University Centre for Nanoscience and Nanotechnology; Chairman, TrEST Research Park; Former Vice Chancellor, Mahatma Gandhi University — Kottayam, Kerala, India

AR

Ajay Vasudeo Rane

Ajay Vasudeo Rane (Dr.) is currently a Post-Doctoral Research Fellow in the Department of Mechanical Engineering at Durban University of Technology. His areas of research include structural, mechanical, and morphological properties of materials (specially polymer composite materials). Dr. Ajay Vasudeo Rane is a member of the Royal Society of South Africa, the South African Institution of Mechanical Engineering, affiliate member of the South African Institution of Chemical Engineers and, a member of the Korean Society of Mechanical Engineers. He has edited five books and has contributed book chapters and technical manuscripts in peer reviewed journals and presented research works at national and international conferences.
Affiliations and expertise
Doctoral Research Fellow, Durban University of Technology, South Africa

AV

Abitha VK

Abitha V.K. is a Senior Research Fellow at the School of Chemical Sciences, Mahatma Gandhi University, India. Her areas of research include rubber, polymer blends, fibre filled polymer composites, particulate filled polymer composites and their morphological and structural characterization. Dr. Abitha has written several book chapters, and has co-edited three books with Elsevier.
Affiliations and expertise
Senior Research Fellow, School of Chemical Sciences, Mahatma Gandhi University, India

KK

Krishnan Kanny

Krishnan Kanny (Dr./Prof.) is currently Director and Full Professor in the Department of Mechanical Engineering at Durban University of Technology, South Africa. He is also the Director of the Composites Research Group. Professor Kanny holds a PhD in Materials Science and Engineering from Tuskegee University, Alabama, USA. Prof Kanny is a registered Professional Technologist (Pr. Tech. Eng) with The Engineering Council of South Africa and holds professional memberships with: the Engineering Council of South Africa (ECSA), the South African Institute of Mechanical Engineers (SaiMech.E), the American Society of Mechanical Engineers (ASME), the American Institute of Aeronautics and Astronomics (AIAA) and is an NRF rated scientist category C1. Krishnan Kanny is a professional engineer and scientist with over thirty years’ experience in management, leadership, and human resources development. Additionally, he has over twenty-five years of research experience in manufacturing, robotics, and advanced engineering materials as well as extensive experience in mechanical engineering product, process and system design including development, implementation, and commissioning. Krishnan Kanny’s professional interests include designing, processing, and testing of composite materials systems, reinforced thermosets/ thermoplastics, and nano-infused structures for aerospace, naval and automotive applications. He also has extensive experience on failure analyses including computational and analytical modeling and characterization & Morphological analysis including Scanning Electron Microscopy (SEM), Transmission Electron Microscopy (TEM), and Xray Photoelectron Spectroscopy (XPS).
Affiliations and expertise
Professor of Material Science and Engineering, Durban University of Technology, South Africa

AD

Aastha Dutta

Aastha Dutta (M.E Chemical) is working as an Assistant Professor in Maharashtra Institute of Technology, Aurangabad. She pursued ME (Chemical Engineering) from Jawahar Lal Nehru Engineering College, Aurangabad. She has teaching experience of 14 years and has been teaching subjects like Material Science, Organic Chemistry, Physical Chemistry of Polymer, Biopolymers, Polymer Recycling and Waste Management, Polymer Reaction Engineering.
Affiliations and expertise
Assistant Professor, Maharashtra Institute of Technology, Aurangabad

View book on ScienceDirect

Read Hydraulic Rubber Dam on ScienceDirect