Books in Nondestructive testing and evaluation

1-10 of 15 results in All results

NDE Handbook

• 1st Edition
• May 12, 2014
• Knud G. Bøving
• English
• eBook 978-1-4831-9234-5

  9 7 8 - 1 - 4 8 3 1 - 9 2 3 4 - 5

NDE Handbook: Non-Destructive Examination Methods for Condition Monitoring deals with monitoring of equipment, structures, and pipes in mechanical engineering, in the processing industry, in construction, and in electrotechnical fields. The book explains acoustic cross correlation involving leak detection in buried main water pipes or heating pipes by using special instruments to detect the flow noise generated at the point of fracture. The acoustic emission method, based on collection of vibrations or sound waves from the suspected material, can detect changes occurring in the material. Magnetic methods and eddy currents can measure the thickness of the coating on specific materials; dye penetrants can expose cracks or cleavages in surface materials; and emission spectroscopy can identify or sort the chemical composition of steel. The book also describes an endoscope used to visualize the interior of objects and the electrical resistance probe that can measure the loss of material based on changes in the electrical resistance. Other NDE methods that are used by investigators include stress pattern analysis by thermal emission, pulsed video thermography, Moire contour mapping, holographic interferometry, computerized tomography, and positron annihilation. The book will prove valuable for engineers, physicists, technicians, operators involved in material research, risk prevention, or accident control, and for general readers interested in materials quality and specifications.

Improving the Effectiveness and Reliability of Non-Destructive Testing

• 1st Edition
• October 22, 2013
• W.E. Gardner
• English
• eBook 978-1-4832-8698-3

  9 7 8 - 1 - 4 8 3 2 - 8 6 9 8 - 3

This book is concerned with the two most important aspects of the use of non-destructive testing. Firstly, the effectiveness of procedures to detect and size the defects present irrespective of the geometry, materials involved or environment. Secondly, the reliability of instrumentation and personnel to perform the specified procedures. Validation and certification techniques required for the justification of safe operation of a plant are also discussed. Experts in industries where safety and defect detection are of paramount importance have made valuable contributions drawn from their experience to make this book essential reading for anyone responsible for safety of plant operation. Illustrated throughout, the book is also of interest to mechanical and structural engineers, researchers and inspectors as well as being a useful reference tool for graduate students.

Impact of Non-Destructive Testing

• 1st Edition
• October 22, 2013
• C. Brook + 1 more
• English
• eBook 978-1-4832-8730-0

  9 7 8 - 1 - 4 8 3 2 - 8 7 3 0 - 0

The 28th British Conference on NDT, the annual conference of The British Institute of Non-Destructive Testing, was held in Sheffield, UK, 18-21 September 1989. Its theme was the impact of NDT, and it provided a valuable opportunity for participants to learn of the current developments in the field. The formal presentations are recorded in this volume; all of the major methods of NDT are detailed, with an emphasis on ultrasonics. Other topics covered in papers include radiography, electronic imaging, crack depth measurement, concrete, and NDT in aircraft. The papers combine to present a comprehensive account of the latest literature in the field, with an excellent representation of the conference's research sessions. Overall the book serves as a valuable record of the conference and provides an insight into recent literary contributions for non-attendees.

Non-Destructive Testing '92

• 1st Edition
• November 14, 2012
• C. Hallai + 1 more
• English
• eBook 978-0-444-59978-0

  9 7 8 - 0 - 4 4 4 - 5 9 9 7 8 - 0

A broad spectrum of technical papers on the most diverse nondestructive testing techniques (NDT) and correlated fields are presented in this volume. The main applications and methods of these important quality control techniques are reviewed in depth. Apart from reporting on the improvements and developments of new techniques and the rapid automatization of nondestructive testings, many papers address the environment from the point of view of inspection surveys. The 265 contributions demonstrate that nondestructive testing techniques (NDT) play a vital role, not only in the quality assurance and control of manufactured products, but also as instruments of public, environmental and industrial safety. The quality of the articles in this book attest to the contribution this conference has made in the technical interchange of experience between NDT professionals, and indicate the present accelerated rate of development of ideas and knowledge in this field.

Non-Destructive Evaluation of Reinforced Concrete Structures

• 1st Edition
• July 27, 2010
• Christiane Maierhofer + 2 more
• English
• eBook 978-1-84569-960-4

  9 7 8 - 1 - 8 4 5 6 9 - 9 6 0 - 4

Engineers have a range of sophisticated techniques at their disposal to evaluate the condition of reinforced concrete structures and non-destructive evaluation plays a key part in assessing and prioritising where money should be spent on repair or replacement of structurally deficient reinforced concrete structures. Non-destructive evaluation of reinforced concrete structures, Volume 2: Non-destructive testing methods reviews the latest non-destructive testing techniques for reinforced concrete structures and how they are used.Part one discusses planning and implementing non-destructive testing of reinforced concrete structures with chapters on non-destructive testing methods for building diagnosis, development of automated NDE systems, structural health monitoring systems and data fusion. Part two reviews individual non-destructive testing techniques including wireless monitoring, electromagnetic and acoustic-elastic waves, laser-induced breakdown spectroscopy, acoustic emission evaluation, magnetic flux leakage, electrical resistivity, capacimetry, measuring the corrosion rate (polarization resistance) and the corrosion potential of reinforced concrete structures, ground penetrating radar, radar tomography, active thermography, nuclear magnetic resonance imaging, stress wave propagation, impact-echo, surface and guided wave techniques and ultrasonics. Part three covers case studies including inspection of concrete retaining walls using ground penetrating radar, acoustic emission and impact echo techniques and using ground penetrating radar to assess an eight-span post-tensioned viaduct.With its distinguished editor and international team of contributors, Non-destructive evaluation of reinforced concrete structures, Volume 2: Non-destructive testing methods is a standard reference for civil and structural engineers as well as those concerned with making decisions regarding the safety of reinforced concrete structures.

Acoustic Emission in Friction

• 1st Edition
• Volume 53
• November 28, 2006
• Victor M. Baranov + 3 more
• English
• Hardback 978-0-08-045150-3

  9 7 8 - 0 - 0 8 - 0 4 5 1 5 0 - 3
• eBook 978-0-08-046627-9

  9 7 8 - 0 - 0 8 - 0 4 6 6 2 7 - 9

Acoustic Emission in Friction is devoted to acoustic, mainly ultrasonic, emission that occurs in friction of machine components. Its crucial novelty is in systematizing the advances in its use for monitoring technical systems, especially in the important nuclear power industry. Written by four well-known experts from the main nuclear research university in Russia, this book covers the following areas: All the sources of acoustic emission in friction The theory of acoustic emission The effects of surface conditions, load and velocity on acoustic emission The equipment for registration and monitoring of acoustic emission Unique data from acoustic emission control under various testing conditions in friction units of machinery for nuclear industry machinery There is much emphasis on the comparatively new and rapidly developing tribology of nuclear power engineering. Although a substantial part of the experimental data relates to this specific field of engineering, the universality of the method is shown and its application is possible wherever the field inspection of friction units is necessary.

Nondestructive Characterization of Materials X

• 1st Edition
• March 20, 2001
• R.E. Green + 4 more
• English
• Hardback 978-0-08-043799-6

  9 7 8 - 0 - 0 8 - 0 4 3 7 9 9 - 6
• eBook 978-0-08-055210-1

  9 7 8 - 0 - 0 8 - 0 5 5 2 1 0 - 1

The papers published in these peer-reviewed proceedings represent the latest developments in nondestructive characterization of materials and were presented at the Tenth International Symposium on Nondestructive Characterization of Materials held on June 26 - 30, 2000 in Karuizawa, Japan. The symposium was held concurrently with three other symposia and one workshop. This symposium is the tenth in the series that began in 1983 and became an international meeting in 1986.The symposium started with a Plenary Lecture entitled 'Application of Non-contact Ultrasonics to Nondestrctive Characterization of Materials' by Professor R.E. Green, Jr. Various characterization methods were presented at the symposium, including ultrasonics, X-ray, eddy currents, laser, thermal wave, acoustic emission, optical fibers, optics, magnetics and ultrasonic microscope. Thin films and coatings as well as smart materials were also emphasized in this symposium.

Acoustic Emission - Beyond the Millennium

• 1st Edition
• September 1, 2000
• T. Kishi + 2 more
• English
• eBook 978-0-08-054634-6

  9 7 8 - 0 - 0 8 - 0 5 4 6 3 4 - 6

The theme of the 15th International Acoustic Emission Symposium (IAES15) was set as 'practicality for life-extension and maintenance of plants and structures'. Special emphasis was placed on the review of acoustic emission (AE) research and applications in the 20th century and its future in the 21st century.The technique for monitoring defects and abnormal vibrations due to machine failures is vitally important for the safety of structures in a modern society. AE, as a passive, rather than an active NDT method, has drawn much attention because of its applicability to on-stream surveillance of structures. One important point is its capability to acquire data very simply but with high sensitivity so that the development of a non-contact sensing technique is particularly important. A quantitative method to evaluate structural integrity and remaining life from the detected AE signals is strongly required. Quantitative analysis, based on inverse procedures, has provided a certain solution, but has not been utilized widely enough in structures due to its complexity. Its applicability is limited partly because the accuracy of solutions depends on noise levels and partly because the phenomenon is usually non-reproducible. AE is expected to be a next-generation technique not only to monitor conditions but also for the repair of damaged structures, combined with an active-adaptive technique using a 'solid state actuator'. 'Smart Materials and Structures' are known in this respect. AE is considered to be a very promising technique, together with such sensing techniques as optical fiber, shape memory alloy and electro-rheological fluid. Thus, AE can play a very important roll in monitoring, evaluating and repairing structures.In this workshop, a limited number of invited papers are presented for technical discussion to review the achievements of AE research and applications in the 20th century. The proceedings are entitled Acoustic Emission - Beyond the Millennium to celebrate the new millennium, and stepping forward to a new era. The authors and topics of these review papers were selected by the editorial board.

Trends in Optical Non-Destructive Testing and Inspection

• 1st Edition
• May 15, 2000
• P.K. Rastogi + 1 more
• English
• Hardback 978-0-08-043020-1

  9 7 8 - 0 - 0 8 - 0 4 3 0 2 0 - 1

This book covers a wide range of measurement techniques broadly referred to as Optical Metrology, with emphasis on their applications to nondestructive testing. If we look separately at each of the two terms making the generic name Optical Metrology, we find a link to two of the most distinctive aspects of humans: a particularly well developed sense of vision and a desire to classify things using numbers and rules. Of all our five senses, vision is certainly the most developed and the closest to the rational part of our brain. It can be argued that our memory is strongly dependent on images and the brain is particularly good at processing the stimuli received from these images to extract information. Measuring, sizing and counting are, on the other hand, among the fundamental building blocks of modern society. The use of abstract quantities like size, value or intensity has simplified the description of complex enquiry and is the basis of modern science and economy. Hence, it would seem natural that the combination of two such basic aspects should result in the birth of a new field of science. However, it is known that his has not been the case. Optical Metrology remains classified as a group of special techniques used mainly in niche applications. Optical Metrology may be rightly described as an ensemble of techniques in which fields such as physics, electrical and mechanical engineering, and computer science merge and blend in new ways. This book is intended as a tribute to the career of Professor Léopold Pflug. By looking back at his lifelong commitment to the application of optical metrology to the service of engineering sciences, more particularly devoted to the observation of the real behavior of structural components, one can retrace the major revolutions that have taken place in this domain. Starting his activity in 1971 as the head of the Laboratory for Stress Analysis at the EPFL in Switzerland, he first employed photoelasticity as a tool to improve the understanding of the real behavior of complex structures. However he soon recognized the necessity of working with the real materials used to build these structures instead of on replicas made of optically birefringent materials. He then focussed on the use of moiré techniques which sparked his fascination with laser-based holography and speckle-based methods. The advent of information technology led him to open up to the use of ESPI and digital image processing techniques. Finally, in the mid 1990s he became interested in the use of optical fibers as a tool for sensing deformations inside structures, not only on their surfaces as in the case of whole-field methods. It is interesting to note the parallel in the evolution of optical metrology vis à vis developments in other fields: the development of lasers led to holographic interferometry, the availability of frame-grabbers led to ESPI and the emergence of fiber optic communications opened the way to the development of fiber optic sensors. This puts in sharp perspective the strong dependence of optical metrology on the latest technology for its development. Also interesting to note is that all fields in optical metrology touched upon by Professor Pflug are still of great relevance, as shown by the contributions in this volume. This book is, however, not intended as a commemoration, rather as an occasion to review the trends and undercurrents that are driving the field of optical metrology, with emphasis on nondestructive testing. All the authors were asked to summarize the recent achievements in their respective fields and to speculate about the future. As a result it has become apparent that it is difficult although not impossible to spot general trends in these disparate fields. Optical metrology has considerably benefited from some of the most important innovations of the recent past: lasers, computers and fiber optics communication, all of which found their direct inspiration from the developments in the world of electronics. In recent years we have also witnessed a shift of power from states to corporations. This has created the need to produce quick results useful to industry. Optical nondestructive testing has certainly adapted to this evolution, and several contributions in this book show that the researchers in this field understand the importance of developing technology that can be used by the industry to solve specific problems. We should also not forget that optical nondestructive testing is essentially a "service technology" and should as such not only focus on serving its clients in the best possible way, but also should continually emphasize, extend and enhance its services to new users still unaware of its potential. Hopefully this book will help in spreading awareness of the potentials of optical metrology and in focusing on the challenges of the future.

Non-Destructive Testing in Civil Engineering 2000

• 1st Edition
• March 31, 2000
• T. Uomoto
• English
• Hardback 978-0-08-043717-0

  9 7 8 - 0 - 0 8 - 0 4 3 7 1 7 - 0
• eBook 978-0-08-054535-6

  9 7 8 - 0 - 0 8 - 0 5 4 5 3 5 - 6

The first international symposium on NDT-CE (Non-Destructive Testing in Civil Engineering) was held in Berlin, Germany in 1991. Successive symposia were held throughout Europe until 1997. This, the 5th symposium is organized as SEIKEN SYMPOSIUM No. 26, and is sponsored by the Institute of Industrial Science, at the University of Tokyo, Japan. Original objectives of the NDT-CE symposium have been to provide an opportunity for discussing current issues and future perspectives of NDT and for promoting mutual understanding among engineers and researchers. Asia is one of the key regions for further development in NDT and this symposium in Japan will be a good opportunity not only to exchange technical information on NDT, but to promote worldwide friendship between engineers in Asian countries and other nations of the world. This volume contains 70 papers providing the most recent research results and findings. The papers are grouped under the following areas: (1) keynote papers, (2) magnetic / electric, (3) steel structures, (4) integrated test, (5) moisture, (6) strength, (7) acoustic emission, (8) various tests, (9) ultrasonic, (10) impact echo, (11) radar, (12) quality and (13) corrosion / cover.