Mechanical Behaviour of Materials

Contents of Volume 2

Contents of Volume 3

Preface

Charter of International Congress on Mechanical Behaviour of Materials

Acknowledgements

Committees

Conference Timetable

Nomenclature

Conversion Units

Theme I: High Temperature Deformation and Failure

Material Considerations for Gas Turbine Engines

Some Useful Concepts for the Designer in Treating Cumulative Fatigue Damage at Elevated Temperatures

Micromechanisms of Fracture and Elevated Temperature Fracture Mechanics

Theme II: Environmental and Time-Dependent Effects

Environmentally Enhanced Cracking of Engineering Alloys - Its Scope and Influence on Large Scale Engineering Projects

Design Against Environment-Sensitive Fracture

Environment Sensitive Fracture - Controlling Parameters

Theme III: Forming and Machining of Materials

A Short Review of Metal Forming Mechanics and Some Processes of Current Research Interest

Principles of Material Removal

Theme IV: Designing with Brittle Solids

Some Aspects of Materials and Structures Engineering with Ceramics for Engine Applications

Structural and Microstructural Design in Brittle Materials

Theme V: Designing with New Materials

Designing with Brittle Materials

Old Materials - New Materials

The Stiffness and Creep Behaviour of Ultra High Modulus Polyethylene

Theme VI: Fast Fracture in Ductile Materials

Fracture in Ductile Materials from a Design Viewpoint

Author Index

Subject Index

Contents of Volume 1

Contents of Volume 3

Preface

Acknowledgements

Committees

Nomenclature

Conversion Units

Theme I: High Temperature Deformation and Failure

Workshop 1: Thermo-Mechanical Loading Effects on Deformation and Failure

Fatigue Strength of Superalloys Subjected to Combined Mechanical and Thermal Loading

Crack Propagation in Metals During Thermal Shock

Macroscopic Description of the Microstructural Changes Induced by Varying Temperature: Example of IN-100 Cyclic Behaviour

Thermal Fatigue Testing of Gas Turbine Materials

Akinetic Deformation Criterion for Creep Low-Cycle Fatigue Under Nonisothermal Loading

Effect of Thermal Cycle on Low Cycle Fatigue Life of Steels and Grain Boundary Sliding Characteristics

Tensile Hold-Time Effects on Isothermal and Thermal Low-Cycle Fatigue of 304 Stainless Steel

Thermal-Mechanical Low-Cycle Fatigue Under Creep-Fatigue Interaction on Type 304 Stainless Steels

Workshop 2: Fatigue Life Assessment

High Temperature Cyclic Life Prediction

Life Prediction of Pipe Components

An Interactive Damage Equation for Creep-Fatigue Interaction

The Influence of Time Dependent Deformation on Fatigue Behaviour at Ambient and Elevated Temperatures

Ultimate States Design in Concentration Zones Under Low-Cycle High Temperature Loading

Damage Formation During Fatigue-Creep Interactions

Damage Mechanisms in the High Temperature Low-Cycle Fatigue of a Cu-Cr-Mg Alloy

Deformation and Intergranular Fracture During High Temperature Creep and Creep Fatigue

Effects of Environment and Hold Times on High Temperature Low Cycle Fatigue Behaviour of 316L Stainless Steel

Workshop 3: Effects of Service Loading and History in the Creep Range

Creep Cavitation and Rupture in 21/4Cr 1Mo Steel Under Uniaxial and Multiaxial Stresses

Properties and Microstructure of 316 Stainless Steel

The Deformation Behaviour of Thick Walled Pipe at Elevated Temperatures

Biaxial Stress Change Experiments During High Temperature Creep

Creep Deformation and Cavitatition Damage in Nimonic 80A Under a Triaxial Tensile Stress

Creep in Butt-Welded Tubes of Cold Worked AISI 316 with Internal Pressure

Thermoviscoplastic Response of Cylindrical Structures Using a State Variable Theory

Expectation of Life of Cast Cr-Mo Steam Turbine Casings After 100 000 hr Operation

Workshop 4: Creep Life Assesment

Creep Damage Accumulation and Life Assessment of a 1/2Cr 1/2Mo 1/4V Steel

The Generation of Reliable Design Data for Long Term High Temperature Creep Applications

Model for Tertiary Creep in Mo and Cr Mo Steels

Cavity Nucleation and Growth in Ferritic Steels

Parametric Methods and Creep Life Prediction: Optimum Choice of Parameter and Relation to Deformation Mechanisms

Behaviour of Cracks in Creep

Creep Crack Growth in AISI 316 Stainless Steel and a Quenched 1Cr 1/2Mo Steel

The Effect of Prior Room Temperature Deformation on Creep, Rupture and Cavitation of 1/2Cr-1/2Mo-J1/4 Steels of Commercial and High Purity

Theme II: Environmental and Time-Dependent Effects

Workshop 1: Cyclic Loading Effects

Marine Durability of a Graphite/Epoxy Composite Subjected to Static and Fatigue Loading

Statistical Evaluation of the Role of Randomly Distributed Pits and Cracks in Corrosion Fatigue

An Approach to Development of Structural Design Criteria for Highly Irradiated Core Components

The Effect of Environment and Frequency of Loading on the Fatigue Crack Propagation of Titanium-Vanadium Alloys

Towards the Development of Mechanistically Based Design Rules for Corrosion Fatigue in Ductile Steels

Application of Tensile Ligament Instability Model of Crack Propagation to UKOSRP Data on BS4360 Grade 50D Steel

Workshop 2: Degradation of Materials Including Hydrogen Embrittlement

A Suggested Method for the Prediction of Liquid Metal Embrittlement

Nucleation and Growth of Stress Corrosion Cracks in Notched Plates of High Strength Steels

Delayed Failure of Vanadium-Hydrogen Alloys

Relationship Between Mechanisms of Environmental Cracking and Design Criteria

The Critical Propagation Event for Hydrogen-Induced Slow Crack Growth in Zr-2.5% Nb

Investigation of the Stress Corrosion Crack Growth Rates of Steel and Titanium Alloy in Artificial Sea Water

Models of the Reduction of Fracture Toughness Due to Hydrogen in Strong Steels

The Corrosion Resistance of Metallic Glasses

Theory of Chemically Assisted Fracture

Mechanistic Aspects of the Pressure-Induced Environmental Stress Crazing and Cracking of Polystyrene

The Physical Mechanisms Responsible for Deterioration in the Properties of Composite Materials

The Temperature Dependence of Thresholds in an α/β Titanium Alloy

Theme III: Forming and Machining of Materials

Workshop 1: Forming Processes

(a) Bulk Deformation

Plastic Flow behaviour Under Frictional Boundary During the Forging Process

Structure and Mechanical Properties of Steel Produced by Rheocasting

Viscous Flow and Forming of a Metallic Glass

Three-Dimensional Strain Field for a Hot-Rolled Billet by Photo-Plastic Simulation

(b) Sheet Forming

The Prediction of Formability Limits from Texture Data

Strain Hardening and Damage

Exploitation of the Temperature Variable in Sheet Forming

Effect of Material Parameters on the Stretch Formability of Sheet Metals

Workshop 2: Cutting and Material Properties

(a) Cutting

Effects of Surface Finish on Residual Stress Distribution and Stress Corrosion Cracking Susceptibility of Type 304 Austenitic Stainless Steel in a Boiling 42% MgCl2 Solution

Extension and Curvature of Perforated Plate During the Punching Process

Surface Deformation and Frictional Heating of Steel During Machining and Laboratory Testing

Fast Fracture of Some Usual Metals at Combined High Strain and High Strain Rate

High Temperature Deformation of Haynes Alloy No. 188

Measurement of Bulk-Formability and the Effect of Second-Phase Particles - An Application of the Upset Test

The Growth and Linkage of Holes During Hot Tensile Deformation of Two Strain-Rate Sensitive Aluminium Alloys

Fracture Under Hot Forming Conditions

The Anisotropic Mechanical Behaviour of Zircaloy - 2

Author Index

Subject Index

Contents of Volume 1

Contents of Volume 2

Preface

Acknowledgements

Committees

Nomenclature

Conversion Units

Theme IV: Designing with Brittle Solids

Workshop 1::::::::::::: Ceramics

Fracture Toughness of Alumina at Room Temperature to 1600°C

Size Effects in Brittle Fracture

Fracture Toughness of Nodular Cast Iron

The Influence of the Surface on the Ultimate Strength of Ceramic Materials

The Effect of Compressive Strength on the Mechanical performance of Strong Ceramics

Phase Retention and Fracture Toughness of Materials Containing Tetragonal ZrO2

Thermal Fracture of Building Glass Subjected to Solar Radiation

Fundamental Approaches to the Statistical Fracture Analysis of Brittle Solids

Workshop 2: Cement and Concrete

Deformation and Fracture of Concrete Subjected to Impact Load or Blast Shock

Effects of Radiation Induced Polymerisation on the Mechanical Properties of Polymer Impregnated Concrete

Failure Process of Concrete: Crack Initiation and Propagation

Triaxial Compressive Creep of Concrete at Temperatures 20°C to 320°C

Behaviour of Concrete in the Compression Zone of Flexural Members; A New Testing Method

Mechanical Properties of Mass-Concrete at Elevated Temperatures

Mechanics of Microcracking in Concrete Subjected to Fatigue Loading

Strength Properties of Steel-Fibre Reinforced Polystyrene-Impregnated Concrete

Workshop 3: Other Materials (Poster Session)

Correlation Between Brittle Fracture Surface Features and Microstructure in Nodular Graphite Cast Iron

Dispersion-Strengthened Zirconium Based Alloys

The Influence of Graphite Shape on Mechanical Properties of Ferritic Cast Iron

Theme V: Desicning with New Materials

Workshop 1: Composites

The Mechanical Properties of Jute Fibres and Polyester/Jute Composites

Mechanical Behaviour of Fibre Strengthened Materials Containing

A Reliability Analysis Approach to Fatigue Life Dispersion of Laminated Glass Fibre Composite Materials

Assessment of Fatigue Damage in the Cyclic Loading of a Glass-Fibre Polyester Composite

The Mechanisms of Initiation and Development of Damage in Multi-Axial Fibre Reinforced Plastics Laminates

Delamination of Glass Fibre Reinforced Polyester, an Acoustic Emission Study

Fracture Mechanisms and Toughening of Fibre Composites

Thermoelasticity and Plasticity of Composite Materials

Mechanisms of Impact Damage in Filament-Wound Glass-Fibre/Epoxy-Resin Tubes

Structure Variations Affecting Interfacial Failure in Steel Fibre Reinforced Cement

Workshop 2: Wood

Slow Crack Growth in Softwoods

A Preliminary Study of Tensile Creep of Beech with Concurrent Moisture Changes

The Relationship Between Toughness and Fracture Surface Topography in Wood and Composites

Time-Dependent Failure of Wood

Morphological Aspects of Wood Fracture

Workshop 3: Other Materials

Cracking of Layered Structures; The Suppression of Yielding by Case Hardening

Mechanical Properties of Silicon Carbide Reinforced Aluminium

Crazing and Shear Lip Formation in the Notched Crack Propagation of a High Density Polyethylene in Air

Fatigue and Fracture Response of Metal-Infiltrated Sintered Powder Metals

Elliptical Planar Crack in a Three Dimensional Body; Fracture Criteria

A Dugdale-Barenblatt Equilibrium Model for Crazes in Glassy Polymers

Design of Corona 5 (Ti-4.5A1-5Mo-1.5Cr) to Meet Application

Theme VI: Fast Fracture in Ductile Materials

Workshop 1: Testing, Metallurgical Factors, Combined Stress

Charpy Energy Transitions for Weld Metal and Heat Affected Zones in SA533B Class 1 Plate

Evaluation of Constraint Factor and J-Integral for Single Edged Notched Specimen

The Strength of Welds in HSLA Steel After Initial Plastic Deformation

J-Integral of a Mixed Mode Crack and its Application

Elastic-Plastic Fracture Mechanics Study of Thermal Shock Cracking

The Directional Stability of Crack Propagation

The Tearing and Cutting of Mild Steel Plate with Application to Ship Grounding Damage

Fracture Toughness Predictions for Nuclear Pressure Vessel Steels

Fracture Analysis of Ductile Materials

Workshop 2: Crack Growth, Tearing,and R-Curves

Determination of Plastic Strains and the Rate of Strain Energy Dissipation in thin Cracked Plates

Some Aspects of the Time Dependent Ductile Fracture of Line Pipe Steels

A Relation Between Crack Tip Plastic Blunting and the J-Integral

Effect of Specimen Size and Geometry on Ductile Fracture Characterization

Transition from Slow to Fast Fracture Under Post-Yield Condition

Prediction of Fast Fracture in Zr-2.5% Nb Pressure Tubes Using Elastic-Plastic Fracture Mechanics

Determination of Fracture Toughness of Plastic Materials Under Conditions of Similarity of Plastic Instability

J-Integral Elastic-Plastic Fracture Mechanics Technology in the U.S. Navy

Characterisation of Crack Initiation and Growth with Applications to Pressure Vessel Steels

Author Index

Subject Index