Biomaterials for Advanced Manufacturing
Cutting-Edge Technologies and Applications
- 1st Edition - March 1, 2027
- Editors: Md Enamul Hoque, Abhishek Sen, Debal Pramanik, Nilanjan Roy, Azam Ali
- Language: English
- Paperback ISBN:9 7 8 - 0 - 4 4 3 - 3 0 1 5 3 - 7
- eBook ISBN:9 7 8 - 0 - 4 4 3 - 3 0 1 5 4 - 4
Biomaterials for Advanced Manufacturing: Cutting-Edge Technologies and Applications provides a comprehensive overview of the manufacturing techniques and approaches for the design… Read more
Purchase options
Biomaterials for Advanced Manufacturing: Cutting-Edge Technologies and Applications provides a comprehensive overview of the manufacturing techniques and approaches for the design and application of biomaterials. The need for materials which are both durable and sustainable is a key challenge faced by many researchers; various design and manufacturing techniques are utilised to emphasise the most vital qualities of biomaterials, crafting them into specialised mediums for a range of biomedical applications. This book reviews a broad selection of these technologies and their associated applications in biomedicine, from laser machining, joining, and electrical discharge machining, through to emerging approaches such as nanotechnology-enabled engineering. This book also highlights the environmental and sustainability aspects of these approaches and biomaterials, with a look toward developing better eco-friendly materials for biomedical applications. Biomaterials for Advanced Manufacturing: Cutting-Edge Technologies and Applications is of interest to researchers and R&D groups interested in evaluating the most effective manufacturing technologies for the development of novel sustainable biomaterials.
- Summarises the classification, synthesis, and fabrication techniques of manufactured biomaterials
- Reviews a range of biodegradable, compostable, and sustainable biomaterials and considerations for their manufacture
- Explores a key selection of biomedical applications for manufactured biomaterials, including drug delivery, regenerative medicine, and sensing
Researchers and academics in the fields of materials science, biomaterials, pharmaceutical science, and regenerative medicine with an interest in development and manufacture of novel sustainable biomaterials
Section 1: Introduction and Design Approaches
1. Introduction to biomaterials in manufacturing: classifications, synthesis and fabrication techniques
2. Evaluation and applications of biomaterials in the modern era
3. Sustainable bio-based polymers for manufacturing applications
4. Advances in biodegradable and compostable biomaterials
5. Biomimicry and bio-inspired designs in biomaterials-assisted manufacturing
6. Development of smart biomaterials for responsive manufacturing processes
Section 2: Manufacturing and Surface Modification Technologies
7. An overview of machining approaches of biomaterials and challenges
8. Laser machining of biomaterials
9. Ultrasonic machining approaches of biomaterials in biomedical fields
10. Electrical discharge machining of biomaterials in biomedical applications
11. Advanced/Hybrid machining approaches for machining of biomaterials
12. Micro-machining techniques of biomaterials for biomedical applications
13. Joining/welding methods suitable for biomaterials
14. Applications of 3D printing with biomaterials in manufacturing
15. Surface modification techniques of biomaterials for enhanced biocompatibility
Section 3: Emerging Technologies, Specific Applications, and Ethical Issues
16. Nanotechnology-enabled biomaterials for enhanced manufacturing capabilities
17. Bio-inspired soft robotics with biomaterials
18. Biomaterials for wearable sensor
19. Biomaterials for tissue engineering and regenerative medicine.
20. Biomaterials for drug delivery systems
21. Circular economy approaches for sustainable manufacturing with biomaterials
22. Ethical and regulatory considerations in manufacturing with biomaterials
1. Introduction to biomaterials in manufacturing: classifications, synthesis and fabrication techniques
2. Evaluation and applications of biomaterials in the modern era
3. Sustainable bio-based polymers for manufacturing applications
4. Advances in biodegradable and compostable biomaterials
5. Biomimicry and bio-inspired designs in biomaterials-assisted manufacturing
6. Development of smart biomaterials for responsive manufacturing processes
Section 2: Manufacturing and Surface Modification Technologies
7. An overview of machining approaches of biomaterials and challenges
8. Laser machining of biomaterials
9. Ultrasonic machining approaches of biomaterials in biomedical fields
10. Electrical discharge machining of biomaterials in biomedical applications
11. Advanced/Hybrid machining approaches for machining of biomaterials
12. Micro-machining techniques of biomaterials for biomedical applications
13. Joining/welding methods suitable for biomaterials
14. Applications of 3D printing with biomaterials in manufacturing
15. Surface modification techniques of biomaterials for enhanced biocompatibility
Section 3: Emerging Technologies, Specific Applications, and Ethical Issues
16. Nanotechnology-enabled biomaterials for enhanced manufacturing capabilities
17. Bio-inspired soft robotics with biomaterials
18. Biomaterials for wearable sensor
19. Biomaterials for tissue engineering and regenerative medicine.
20. Biomaterials for drug delivery systems
21. Circular economy approaches for sustainable manufacturing with biomaterials
22. Ethical and regulatory considerations in manufacturing with biomaterials
- Edition: 1
- Published: March 1, 2027
- Language: English
MH
Md Enamul Hoque
Dr Md Enamul Hoque is a Professor in the Department of Biomedical Engineering at the Military Institute of Science and Technology (MIST), Dhaka, Bangladesh. Before joining MIST, he served in several leading positions in some other global universities such as Head of the Department of Biomedical Engineering at King Faisal University (KFU), Saudi Arabia; Founding Head of Bioengineering Division, University of Nottingham Malaysia Campus (UNMC) and so on. He received his PhD in 2007 from the National University of Singapore (NUS), Singapore. He also obtained his PGCHE (Post Graduate Certificate in Higher Education) from the University of Nottingham, UK in 2015. He is a Chartered Engineer (CEng) certified by the Engineering Council, UK; Fellow of the Institute of Mechanical Engineering (FIMechE), UK; Fellow of Higher Education Academy (FHEA), UK and Member, World Academy of Science, Engineering and Technology. He has published more than 100 articles, more than 10 books, over 75 book chapters, and over 100 International Conference presentations/proceedings.
Affiliations and expertise
Professor, Department of Biomedical Engineering, Military Institute of Science and Technology (MIST), Dhaka, BangladeshAS
Abhishek Sen
Dr. Abhishek Sen is an Assistant Professor at the Calcutta Institute of Technology, Uluberia, Howrah, West Bengal, India. He is an accomplished academic and researcher with a strong background in Mechanical Engineering. He has over six years of teaching and six years of research experience. Dr. Sen's research interests are wide-ranging, encompassing traditional and non-traditional machining approaches, additive manufacturing, synthesis of materials, simulation and modeling, and optimization methods. He has contributed to more than 13 International journals, 8 book chapters, over 23 International conference proceedings, and 1 book. Dr. Sen is a lifetime member of the International Association of Engineers and has served as a reviewer for esteemed International journals and conferences. His paper on "Modeling of Laser Welding of stainless steel using artificial neural networks" was awarded the best paper in ICRAEM 2022. In addition to his research accomplishments, Dr. Sen has played a key role in the development of Calcutta Institute of Technology's Virtual Labs, serving as the Nodal Coordinator for West Bengal, India.
Affiliations and expertise
Assistant Professor, Calcutta Institute of Technology, Uluberia, Howrah, West Bengal, IndiaDP
Debal Pramanik
Dr. Debal Pramanik is an Assistant Professor at the Swami Vivekananda Institute of Science & Technology, Rajpur Sonarpur, West Bengal, India. He obtained a Ph.D. in Engineering at Jadavpur University, Kolkata, in the Production Engineering Department. His research interests include Advanced Manufacturing Technology, more specifically Laser Beam Machining, Additive Manufacturing, and Electro-Discharge Machining. Dr. Pramanik published 5 (Five) SCI and 4 (Four) SCOPUS indexed Journals, 12 (Twelve) International Conference Proceedings, and 5 (Five) Invited Book Chapters. Dr. Pramanik received financial aid from TEQIP Phase II and RUSA 2.0 to conduct his Ph.D.research. Dr. Pramanik received a Medal in Master of Technology from the Maulana Abul Kalam Azad University of Technology (Formally known as West Bengal University of Technology) in the year 2015. Additionally, he has qualified for the GATE examination. He was also invited to the 40th Matador Conference on Advanced Manufacturing Technology (MATADOR-2019) for a paper presentation at the Zhejiang University of Technology, Hangzhou which was jointly organized by The University of Manchester, UK, and Zhejiang University of Technology and Beijing University of Technology, China.
Affiliations and expertise
Assistant Professor, Swami Vivekananda Institute of Science & Technology, Dakshin Gobindapur Rd, Rajpur Sonarpur, West Bengal, IndiaNR
Nilanjan Roy
Dr. Nilanjan Roy is an Assistant Professor at Swami Vivekananda Institute of Science & Technology, Rajpur Sonarpur, West Bengal, India. He completed his Ph.D. degree from Production Engineering Department, at Jadavpur University. His research interest is in laser-based material processing, additive manufacturing, and advanced joining processes. 10 international journals (4 SCI, 5 Scopus & 1 peer-reviewed international journal) have been published by him. He also presented 15 research articles at various international conferences held in India and abroad by institutes of repute. He visited Zhejiang University of Technology, Hangzhou, CHINA to present his research work at the 40th MATADOR conference in July 2019, organized by the University of Manchester. He has also contributed 7original research articles as book chapters in different edited books. He has received an MHRD GATE scholarship to complete his PG course. He also got a DST PURSE & UGC Rajiv Gandhi National Fellowship to complete his research work as a Ph.D. scholar. Basic Thermodynamics, Thermal Engineering, Advanced Manufacturing Processes, Applied Thermodynamics, and Operation Research are the major topics of the undergraduate courses that he has taught at the institution.
Affiliations and expertise
Assistant Professor, Swami Vivekananda Institute of Science & Technology, Dakshin Gobindapur Rd, Rajpur Sonarpur, West Bengal, IndiaAA
Azam Ali
Professor Azam Ali is Director of the Centre for Bioengineering and Nanomedicine, Division of Health Sciences, University of Otago, New Zealand. He is an internationally recognized biomaterial scientist, has strong research and teaching expertise in biomaterials and biomedical engineering. He obtained his PhD in biomaterials Science and engineering (2000) from USM. He worked at the Crown Research Institute (AgResearch, the largest New Zealand Govt. Research Organisation) as a senior scientist and research leader (2003-2013). He joined the University of Otago (UoO) in 2013 as director of the Centre for Bioengineering and Nanomedicine. He has secured many national/International grants, worth NZ$12.5 million for 20+ projects. He has been leading (director) the bioengineering academic program at UoO, since 2014. He has published over 140 refereed articles, holds 24 Patents (21 granted as full patents), invented 6 medical devices (commercializing over 23 countries worldwide), and 12 Book chapters. He served as editor-in-chief (J. Mat Sci. & Eng.), and editorial board member of Bioactive Materials.
Affiliations and expertise
Director, Centre for Bioengineering and Nanomedicine Division of Health Sciences, University of Otago, New Zealand