Skip to main content

Books in Surfaces and interfaces

Semiconductor Materials Analysis and Fabrication Process Control
1st Edition
Volume 34
December 2, 2012
G.M. Crean + 2 more
English
There is a growing awareness that the successful implementation of novel material systems and technology steps in the fabrication of microelectronic and optoelectronic devices, is critically dependent on the understanding and control of the materials, the process steps and their interactions. The contributions in this volume demonstrate that characterisation and analysis techniques are an essential support mechanism for research in these fields. Current major research themes are reviewed both in the development and application of diagnostic techniques for advanced materials analysis and fabrication process control. Two distinct trends are elucidated: the emergence and evaluation of sophisticated in situ optical diagnostic techniques such as photoreflectance and spectroellipsometry and the industrial application of ultra-high sensitivity chemical analysis techniques for contamination monitoring. The volume will serve as a useful and timely overview of this increasingly important field.
Shallow Impurity Centers in Semiconductors
1st Edition
December 2, 2012
A. Baldereschi + 1 more
English
Shallow Impurity Centers in Semiconductors presents the proceedings of the Second International Conference on Shallow Impurity Centers/Fourth Trieste IUPAP-ICTP Semiconductor Symposium, held at the International Center for Theoretical Physics in Trieste, Italy, on July 28 to August 1, 1986. The book presents the perspectives of some of the leading scientists in the field who address basic physical aspects and device implications, novel phenomena, recent experimental and theoretical techniques, and the behavior of impurities in new semiconductor materials. Organized into 22 chapters, the book begins with an overview of the early years of shallow impurity states before turning to a discussion of progress in spectroscopy of shallow centers in semiconductors since 1960. It then looks at theoretical and experimental aspects of hydrogen diffusion and shallow impurity passivation in semiconductors, along with optical excitation spectroscopy of isolated double donors in silicon. The book methodically walks the reader through recent research on double acceptors using near-, mid-, and far-infrared spectroscopy, the far-infrared absorption spectrum of elemental shallow donors and acceptors in germanium, and impurity spectra in stress-induced uniaxial germanium using Zeeman spectroscopy. Other papers focus on the theoretical properties of hydrogenic impurities in quantum wells, lattice relaxations at substitutional impurities in semiconductors, shallow bound excitons in silver halides, and the electronic structure of bound excitons in semiconductors. The book concludes with a chapter that reviews picosecond spectroscopy experiments performed in III-V compounds and alloy semiconductors. This volume will be useful to physicists and researchers who are working on shallow impurity centers in semiconductor physics.
Photonic Probes of Surfaces
1st Edition
December 2, 2012
P. Halevi
English
This volume is devoted principally to optical spectroscopies of material surfaces and also encompasses scattering techniques and theoretical response analysis as well as spectroscopies. In addition to solid surfaces some attention is also devoted to interfaces between two solids, between a solid and a liquid and to a liquid-vapor interface. These surfaces may be clean and perfect, in which case the purpose of the spectroscopical method at hand is to determine the deviation of the atomic structure in the surface region from that in the bulk, namely the surface reconstruction. Otherwise the surface may be imperfect due to roughness, strain or overlayers, in which case the spectroscopy can yield information on the nature of such imperfections, including the monitoring of growth processes. One of the foremost purposes of surface spectroscopies is to extract information on atomic and molecular adsorbates on solid surfaces. Most of the 10 chapters are concerned with photonic sources of excitation, the respective spectral regions ranging from the far infrared to X-rays.In conclusion this book provides a state-of-the-art review of all major types of photonic probes of surfaces and interfaces and deals with both applications and experiment and theory.
Thin Film Processes II
1st Edition
December 2, 2012
Werner Kern
John L. Vossen
English
This sequel to the 1978 classic, Thin Film Processes, gives a clear, practical exposition of important thin film deposition and etching processes that have not yet been adequately reviewed. It discusses selected processes in tutorial overviews with implementation guide lines and an introduction to the literature. Though edited to stand alone, when taken together, Thin Film Processes II and its predecessor present a thorough grounding in modern thin film techniques.
Thin Film Processes
1st Edition
December 2, 2012
John L. Vossen
English
Remarkable advances have been made in recent years in the science and technology of thin film processes for deposition and etching. It is the purpose of this book to bring together tutorial reviews of selected filmdeposition and etching processes from a process viewpoint. Emphasis is placed on the practical use of the processes to provide working guidelines for their implementation, a guide to the literature, and an overview of each process.
Metallurgical Coatings and Thin Films 1991
1st Edition
December 2, 2012
G.E. McGuire + 2 more
English
The contributions in this two-volume set represent the work of over two hundred international researchers from universities, government laboratories and industry, with diverse backgrounds and interests in a wide range of coatings and thin film processes. The two hundred and six papers attest to the fact that Metallurgical Coatings is a rapidly growing field attracting experts from the large materials, scientific and technical community. The papers will be a useful and dynamic tool for those wishing to increase their knowledge on metallurgical coatings, as well as providing a guide to recent literature in this field.
Surfaces and Interfaces: Physics and Electronics
1st Edition
December 2, 2012
R.S. Bauer
English
Surfaces and Interfaces: Physics and Electronics covers the proceedings of the second Trieste ICTP-IUPAP Semiconductor Symposium, conducted at the International Center for Theoretical Physics in Trieste, Italy on August 30 to September 3, 1982. The book focuses on the processes, methodologies, reactions, and approaches involved in semiconductor physics. The selection first elaborates on the electronic properties and surface geometry of GaAs and ZnO surfaces; electronic structure of Si (III) surfaces; and photoemission studies of surface states on Si (III) 2X1. Discussions focus on consistency of different experiments, relating experiments to a theoretical model, quenching of surface states by hydrogen, inverse photoemission results, and basic data and models of the low-index ZnO surfaces. The text then examines Si (III) 2X1 studies by angle resolved photoemission; electronic surface states at steps in Si (III) 2X1; and a novel method for the study of optical properties of surfaces. The manuscript takes a look at spot profile analysis (LEED) of defects at silicon surfaces; chemisorption-induce... defects at interfaces on compound semiconductors; and surface defects on semiconductors. The microscopic properties and behavior of silicide interfaces, recombination at semiconductor surfaces and interfaces, and dipoles, defects, and interfaces are also discussed. The selection is a highly recommended source of data for physicists and readers wanting to study semiconductor physics.
Developments in Surface Contamination and Cleaning - Vol 5
Contaminant Removal and Monitoring
1st Edition
November 29, 2012
Rajiv Kohli + 1 more
English
In this series, Rajiv Kohli and Kash Mittal have brought together the work of experts from different industry sectors and backgrounds to provide a state-of-the-art survey and best-practice guidance for scientists and engineers engaged in surface cleaning or dealing with the consequences of surface contamination. This volume complements Volumes 3 and 4 of this series, which focused largely on particulate contaminants. The expert contributions in this volume cover methods for removal of non-particulate contaminants, such as metallic and non-metallic thin films, hydrocarbons, toxic and hazardous chemicals, and microbiological substances, as well as contamination monitoring in pharmaceutical manufacturing, and an innovative method for characterization at the nanoscale.
Surface Preparation Techniques for Adhesive Bonding
2nd Edition
November 29, 2012
Raymond F. Wegman + 1 more
English
Surface Preparation Techniques for Adhesive Bonding is an essential guide for materials scientists, mechanical engineers, plastics engineers, scientists and researchers in manufacturing environments making use of adhesives technology. Wegman and van Twisk provide practical coverage of a topic that receives only cursory treatment in more general books on adhesives, making this book essential reading for adhesion specialists, plastics engineers, and a wide range of engineers and scientists working in sectors where adhesion is an important technology, e.g. automotive / aerospace, medical devices, electronics. Wegman and van Twisk provide a wealth of practical information on the processing of substrate surfaces prior to adhesive bonding. The processing of aluminum and its alloys, titanium and its alloys, steels, copper and its alloys, and magnesium are treated in the form of detailed specifications with comparative data. Other metals not requiring extensive treatment are also covered in detail, as are metal matrix and organic matrix composites, thermosets and thermoplastics. This new edition has been updated with coverage of the latest developments in the field including the sol-gel process for aluminum, titanium, and stainless steel, atmospheric plasma treatment for metals, plastics and rubbers and treatments for bronze and nickel alloys.
Handbook of Thin Film Deposition
3rd Edition
June 27, 2012
Krishna Seshan
English
The Handbook of Thin Film Deposition is a comprehensive reference focusing on thin film technologies and applications used in the semiconductor industry and the closely related areas of thin film deposition, thin film micro properties, photovoltaic solar energy applications, new materials for memory applications and methods for thin film optical processes. In a major restructuring, this edition of the handbook lays the foundations with an up-to-date treatment of lithography, contamination and yield management, and reliability of thin films. The established physical and chemical deposition processes and technologies are then covered, the last section of the book being devoted to more recent technological developments such as microelectromechanic... systems, photovoltaic applications, digital cameras, CCD arrays, and optical thin films.

Related subjects